From: Maulik Shah <quic_mkshah@quicinc.com>
To: <andersson@kernel.org>, <ulf.hansson@linaro.org>,
<dianders@chromium.org>, <swboyd@chromium.org>,
<wingers@google.com>, <daniel.lezcano@linaro.org>,
<rafael@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pm@vger.kernel.org>, <sudeep.holla@arm.com>,
<jwerner@chromium.org>, <quic_lsrao@quicinc.com>,
<quic_rjendra@quicinc.com>, Maulik Shah <quic_mkshah@quicinc.com>,
<devicetree@vger.kernel.org>
Subject: [RESEND v4 3/3] arm64: dts: qcom: sc7280: Add power-domains for cpuidle states
Date: Mon, 3 Jul 2023 14:25:55 +0530 [thread overview]
Message-ID: <20230703085555.30285-4-quic_mkshah@quicinc.com> (raw)
In-Reply-To: <20230703085555.30285-1-quic_mkshah@quicinc.com>
Add power-domains for cpuidle states to use psci os-initiated idle states.
Cc: devicetree@vger.kernel.org
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 98 +++++++++++++++++++++-------
1 file changed, 73 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index a0e8db8270e7..84208a6c673d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -170,9 +170,8 @@
reg = <0x0 0x0>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
next-level-cache = <&L2_0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -198,9 +197,8 @@
reg = <0x0 0x100>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
next-level-cache = <&L2_100>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -221,9 +219,8 @@
reg = <0x0 0x200>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
next-level-cache = <&L2_200>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -244,9 +241,8 @@
reg = <0x0 0x300>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- cpu-idle-states = <&LITTLE_CPU_SLEEP_0
- &LITTLE_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
next-level-cache = <&L2_300>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -267,9 +263,8 @@
reg = <0x0 0x400>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
next-level-cache = <&L2_400>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -290,9 +285,8 @@
reg = <0x0 0x500>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
next-level-cache = <&L2_500>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -313,9 +307,8 @@
reg = <0x0 0x600>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
next-level-cache = <&L2_600>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -336,9 +329,8 @@
reg = <0x0 0x700>;
clocks = <&cpufreq_hw 2>;
enable-method = "psci";
- cpu-idle-states = <&BIG_CPU_SLEEP_0
- &BIG_CPU_SLEEP_1
- &CLUSTER_SLEEP_0>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
next-level-cache = <&L2_700>;
operating-points-v2 = <&cpu7_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -431,9 +423,11 @@
min-residency-us = <5555>;
local-timer-stop;
};
+ };
+ domain-idle-states {
CLUSTER_SLEEP_0: cluster-sleep-0 {
- compatible = "arm,idle-state";
+ compatible = "domain-idle-state";
idle-state-name = "cluster-power-down";
arm,psci-suspend-param = <0x40003444>;
entry-latency-us = <3263>;
@@ -811,6 +805,59 @@
psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
};
qspi_opp_table: opp-table-qspi {
@@ -5291,6 +5338,7 @@
<SLEEP_TCS 3>,
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
+ power-domains = <&CLUSTER_PD>;
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
--
2.17.1
next prev parent reply other threads:[~2023-07-03 8:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-03 8:55 [RESEND v4 0/3] Use PSCI OS initiated mode for sc7280 Maulik Shah
2023-07-03 8:55 ` [RESEND v4 1/3] cpuidle: dt_idle_genpd: Add helper function to remove genpd topology Maulik Shah
2023-07-03 8:55 ` [RESEND v4 2/3] cpuidle: psci: Move enabling OSI mode after power domains creation Maulik Shah
2023-07-03 8:55 ` Maulik Shah [this message]
2024-03-14 23:20 ` [RESEND v4 3/3] arm64: dts: qcom: sc7280: Add power-domains for cpuidle states Doug Anderson
2024-03-14 23:39 ` Abhinav Kumar
2024-03-15 15:07 ` Doug Anderson
2024-03-15 15:24 ` Sudeep Holla
2024-03-15 17:12 ` Doug Anderson
2024-03-15 17:26 ` Sudeep Holla
2024-03-15 17:31 ` Doug Anderson
2023-08-08 14:17 ` [RESEND v4 0/3] Use PSCI OS initiated mode for sc7280 Ulf Hansson
2023-09-14 16:04 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230703085555.30285-4-quic_mkshah@quicinc.com \
--to=quic_mkshah@quicinc.com \
--cc=andersson@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jwerner@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_lsrao@quicinc.com \
--cc=quic_rjendra@quicinc.com \
--cc=rafael@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=swboyd@chromium.org \
--cc=ulf.hansson@linaro.org \
--cc=wingers@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®