mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH v2 2/2] usb: typec: qcom-pmic-typec: register drm_bridge
Date: Sun,  9 Jul 2023 23:13:09 +0300	[thread overview]
Message-ID: <20230709201309.274306-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230709201309.274306-1-dmitry.baryshkov@linaro.org>

The current approach to handling DP on bridge-enabled platforms requires
a chain of DP bridges up to the USB-C connector. Register a last DRM
bridge for such chain.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/usb/typec/tcpm/Kconfig                |  1 +
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 39 +++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 5d393f520fc2..0b2993fef564 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -79,6 +79,7 @@ config TYPEC_WCOVE
 config TYPEC_QCOM_PMIC
 	tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver"
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on DRM || DRM=n
 	help
 	  A Type-C port and Power Delivery driver which aggregates two
 	  discrete pieces of silicon in the PM8150b PMIC block: the
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index a905160dd860..0722fb8d75c4 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -17,6 +17,9 @@
 #include <linux/usb/role.h>
 #include <linux/usb/tcpm.h>
 #include <linux/usb/typec_mux.h>
+
+#include <drm/drm_bridge.h>
+
 #include "qcom_pmic_typec_pdphy.h"
 #include "qcom_pmic_typec_port.h"
 
@@ -33,6 +36,9 @@ struct pmic_typec {
 	struct pmic_typec_port	*pmic_typec_port;
 	bool			vbus_enabled;
 	struct mutex		lock;		/* VBUS state serialization */
+#ifdef CONFIG_DRM
+	struct drm_bridge	bridge;
+#endif
 };
 
 #define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc)
@@ -146,6 +152,35 @@ static int qcom_pmic_typec_init(struct tcpc_dev *tcpc)
 	return 0;
 }
 
+#ifdef CONFIG_DRM
+static int qcom_pmic_typec_attach(struct drm_bridge *bridge,
+				     enum drm_bridge_attach_flags flags)
+{
+	return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
+}
+
+static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = {
+	.attach = qcom_pmic_typec_attach,
+};
+
+static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm)
+{
+	tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs;
+#if CONFIG_OF
+	tcpm->bridge.of_node = of_get_child_by_name(tcpm->dev->of_node, "connector");
+#endif
+	tcpm->bridge.ops = DRM_BRIDGE_OP_HPD;
+	tcpm->bridge.type = DRM_MODE_CONNECTOR_USB;
+
+	return devm_drm_bridge_add(tcpm->dev, &tcpm->bridge);
+}
+#else
+static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm)
+{
+	return 0;
+}
+#endif
+
 static int qcom_pmic_typec_probe(struct platform_device *pdev)
 {
 	struct pmic_typec *tcpm;
@@ -208,6 +243,10 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	mutex_init(&tcpm->lock);
 	platform_set_drvdata(pdev, tcpm);
 
+	ret = qcom_pmic_typec_init_drm(tcpm);
+	if (ret)
+		return ret;
+
 	tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
 	if (IS_ERR(tcpm->tcpc.fwnode))
 		return PTR_ERR(tcpm->tcpc.fwnode);
-- 
2.39.2


  parent reply	other threads:[~2023-07-09 20:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-09 20:13 [PATCH v2 0/2] usb: typec: qcom-pmic-typec: enable DP support Dmitry Baryshkov
2023-07-09 20:13 ` [PATCH v2 1/2] usb: typec: altmodes/displayport: add support for embedded DP cases Dmitry Baryshkov
2023-07-10  4:58   ` Bjorn Andersson
2023-07-09 20:13 ` Dmitry Baryshkov [this message]
2023-07-10 10:02   ` [PATCH v2 2/2] usb: typec: qcom-pmic-typec: register drm_bridge Bryan O'Donoghue
2023-07-10 10:04     ` Konrad Dybcio
2023-07-10 10:57       ` Dmitry Baryshkov
2023-07-10 13:31         ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230709201309.274306-3-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®