From: Tim Harvey <tharvey@gateworks.com>
To: Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH] arm64: dts: imx8mp: add imx8mp-venice-gw74xx-imx219 overlay for rpi v2 camera
Date: Tue, 11 Jul 2023 15:15:18 -0700 [thread overview]
Message-ID: <20230711221518.2127861-1-tharvey@gateworks.com> (raw)
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW74xx MIPI_GPIO4 (IMX8MP GPIO1_IO4) so we use this as a gpio
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Example configuration:
media-ctl -l "'imx219 3-0010':0->'csis-32e40000.csi':0[1]"
media-ctl -v -V "'imx219 3-0010':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'crossbar':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'mxc_isi.0':0 [fmt:SRGGB8/640x480 field:none]"
v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=RGGB
v4l2-ctl --stream-mmap --stream-to=frame.raw --stream-count=1
convert -size 640x480 -depth 8 gray:frame.raw frame.png
gst-launch-1.0 v4l2src ! \
video/x-bayer,format=rggb,width=640,height=480,framerate=10/1 ! \
bayer2rgb ! fbdevsink
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../imx8mp-venice-gw74xx-imx219.dtso | 80 +++++++++++++++++++
2 files changed, 82 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 60a69e114442..9dc3c1be1899 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -156,6 +156,7 @@ imx8mm-venice-gw73xx-0x-rpidsi-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice
imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-imx219-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-imx219.dtbo
imx8mp-venice-gw74xx-rpidsi-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
@@ -168,6 +169,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
new file mode 100644
index 000000000000..270a9114da97
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp";
+
+ reg_cam: regulator-cam {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_cam>;
+ compatible = "regulator-fixed";
+ regulator-name = "reg_cam";
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ cam24m: cam24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "cam24m";
+ };
+};
+
+&i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx219: sensor@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+ clocks = <&cam24m>;
+ VDIG-supply = <®_cam>;
+
+ port {
+ /* MIPI CSI-2 bus endpoint */
+ imx219_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi_0_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+};
+
+&isi_0 {
+ status = "okay";
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_csi_0_in: endpoint {
+ remote-endpoint = <&imx219_to_mipi_csi2>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_reg_cam: regcamgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41
+ >;
+ };
+};
--
2.25.1
next reply other threads:[~2023-07-11 22:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-11 22:15 Tim Harvey [this message]
2023-07-13 18:52 ` Fabio Estevam
2023-08-14 17:55 ` Tim Harvey
2023-09-19 12:29 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230711221518.2127861-1-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®