From: Suman Ghosh <sumang@marvell.com>
To: <sgoutham@marvell.com>, <gakula@marvell.com>,
<sbhatta@marvell.com>, <hkelam@marvell.com>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: Suman Ghosh <sumang@marvell.com>
Subject: [net PATCH 2/3] octeontx2-af: Fix hash extraction enable configuration
Date: Wed, 12 Jul 2023 16:46:03 +0530 [thread overview]
Message-ID: <20230712111604.2290974-3-sumang@marvell.com> (raw)
In-Reply-To: <20230712111604.2290974-1-sumang@marvell.com>
As of today, hash extraction was enabled by default for the default
MKEX profile. This patch fixes that and enable the support based on
customer specific MKEX profile.
Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
---
.../marvell/octeontx2/af/rvu_npc_fs.c | 22 +++++++---
.../marvell/octeontx2/af/rvu_npc_fs.h | 4 ++
.../marvell/octeontx2/af/rvu_npc_hash.c | 43 ++++++++++++++++++-
.../marvell/octeontx2/af/rvu_npc_hash.h | 8 ++--
4 files changed, 65 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 006beb5cf98d..acb6f34b3cae 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -13,11 +13,6 @@
#include "rvu_npc_fs.h"
#include "rvu_npc_hash.h"
-#define NPC_BYTESM GENMASK_ULL(19, 16)
-#define NPC_HDR_OFFSET GENMASK_ULL(15, 8)
-#define NPC_KEY_OFFSET GENMASK_ULL(5, 0)
-#define NPC_LDATA_EN BIT_ULL(7)
-
static const char * const npc_flow_names[] = {
[NPC_DMAC] = "dmac",
[NPC_SMAC] = "smac",
@@ -442,6 +437,7 @@ static void npc_handle_multi_layer_fields(struct rvu *rvu, int blkaddr, u8 intf)
static void npc_scan_ldata(struct rvu *rvu, int blkaddr, u8 lid,
u8 lt, u64 cfg, u8 intf)
{
+ struct npc_mcam_kex_hash *mkex_hash = rvu->kpu.mkex_hash;
struct npc_mcam *mcam = &rvu->hw->mcam;
u8 hdr, key, nr_bytes, bit_offset;
u8 la_ltype, la_start;
@@ -490,8 +486,20 @@ do { \
NPC_SCAN_HDR(NPC_SIP_IPV4, NPC_LID_LC, NPC_LT_LC_IP, 12, 4);
NPC_SCAN_HDR(NPC_DIP_IPV4, NPC_LID_LC, NPC_LT_LC_IP, 16, 4);
NPC_SCAN_HDR(NPC_IPFRAG_IPV6, NPC_LID_LC, NPC_LT_LC_IP6_EXT, 6, 1);
- NPC_SCAN_HDR(NPC_SIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 8, 16);
- NPC_SCAN_HDR(NPC_DIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 24, 16);
+ if (rvu->hw->cap.npc_hash_extract) {
+ if (mkex_hash->lid_lt_ld_hash_en[intf][lid][lt][0])
+ NPC_SCAN_HDR(NPC_SIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 8, 4);
+ else
+ NPC_SCAN_HDR(NPC_SIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 8, 16);
+
+ if (mkex_hash->lid_lt_ld_hash_en[intf][lid][lt][1])
+ NPC_SCAN_HDR(NPC_DIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 24, 4);
+ else
+ NPC_SCAN_HDR(NPC_DIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 24, 16);
+ } else {
+ NPC_SCAN_HDR(NPC_SIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 8, 16);
+ NPC_SCAN_HDR(NPC_DIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 24, 16);
+ }
NPC_SCAN_HDR(NPC_SPORT_UDP, NPC_LID_LD, NPC_LT_LD_UDP, 0, 2);
NPC_SCAN_HDR(NPC_DPORT_UDP, NPC_LID_LD, NPC_LT_LD_UDP, 2, 2);
NPC_SCAN_HDR(NPC_SPORT_TCP, NPC_LID_LD, NPC_LT_LD_TCP, 0, 2);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.h
index bdd65ce56a32..3f5c9042d10e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.h
@@ -9,6 +9,10 @@
#define __RVU_NPC_FS_H
#define IPV6_WORDS 4
+#define NPC_BYTESM GENMASK_ULL(19, 16)
+#define NPC_HDR_OFFSET GENMASK_ULL(15, 8)
+#define NPC_KEY_OFFSET GENMASK_ULL(5, 0)
+#define NPC_LDATA_EN BIT_ULL(7)
void npc_update_entry(struct rvu *rvu, enum key_fields type,
struct mcam_entry *entry, u64 val_lo,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
index 79e649917ffa..76553e0c216f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
@@ -215,13 +215,54 @@ void npc_config_secret_key(struct rvu *rvu, int blkaddr)
void npc_program_mkex_hash(struct rvu *rvu, int blkaddr)
{
+ struct npc_mcam_kex_hash *mh = rvu->kpu.mkex_hash;
struct hw_cap *hwcap = &rvu->hw->cap;
+ u8 intf, ld, hdr_offset, byte_len;
struct rvu_hwinfo *hw = rvu->hw;
- u8 intf;
+ u64 cfg;
+ /* Check if hardware supports hash extraction */
if (!hwcap->npc_hash_extract)
return;
+ /* Check if IPv6 source/destination address
+ * should be hash enabled.
+ * Hashing reduces 128bit SIP/DIP fields to 32bit
+ * so that 224 bit X2 key can be used for IPv6 based filters as well,
+ * which in turn results in more number of MCAM entries available for
+ * use.
+ *
+ * Hashing of IPV6 SIP/DIP is enabled in below scenarios
+ * 1. If the silicon variant supports hashing feature
+ * 2. If the number of bytes of IP addr being extracted is 4 bytes ie
+ * 32bit. The assumption here is that if user wants 8bytes of LSB of
+ * IP addr or full 16 bytes then his intention is not to use 32bit
+ * hash.
+ */
+ for (intf = 0; intf < hw->npc_intfs; intf++) {
+ for (ld = 0; ld < NPC_MAX_LD; ld++) {
+ cfg = rvu_read64(rvu, blkaddr,
+ NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf,
+ NPC_LID_LC,
+ NPC_LT_LC_IP6,
+ ld));
+ hdr_offset = FIELD_GET(NPC_HDR_OFFSET, cfg);
+ byte_len = FIELD_GET(NPC_BYTESM, cfg);
+ /* Hashing of IPv6 source/destination address should be
+ * enabled if,
+ * hdr_offset == 8 (offset of source IPv6 address) or
+ * hdr_offset == 24 (offset of destination IPv6)
+ * address) and the number of byte to be
+ * extracted is 4. As per hardware configuration
+ * byte_len should be == actual byte_len - 1.
+ * Hence byte_len is checked against 3 but nor 4.
+ */
+ if ((hdr_offset == 8 || hdr_offset == 24) && byte_len == 3)
+ mh->lid_lt_ld_hash_en[intf][NPC_LID_LC][NPC_LT_LC_IP6][ld] = true;
+ }
+ }
+
+ /* Update hash configuration if the field is hash enabled */
for (intf = 0; intf < hw->npc_intfs; intf++) {
npc_program_mkex_hash_rx(rvu, blkaddr, intf);
npc_program_mkex_hash_tx(rvu, blkaddr, intf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
index bbc7a0e95e48..52d4234897c6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
@@ -67,8 +67,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
[NIX_INTF_RX] = {
[NPC_LID_LC] = {
[NPC_LT_LC_IP6] = {
- true,
- true,
+ false,
+ false,
},
},
},
@@ -76,8 +76,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
[NIX_INTF_TX] = {
[NPC_LID_LC] = {
[NPC_LT_LC_IP6] = {
- true,
- true,
+ false,
+ false,
},
},
},
--
2.25.1
next prev parent reply other threads:[~2023-07-12 11:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 11:16 [net PATCH 0/3] octeontx2-af: Fix issues with NPC field hash extract Suman Ghosh
2023-07-12 11:16 ` [net PATCH 1/3] octeontx2-af: Fix hash extraction mbox message Suman Ghosh
2023-07-12 12:39 ` Leon Romanovsky
2023-07-13 5:19 ` Jakub Kicinski
2023-07-14 7:06 ` [EXT] " Suman Ghosh
2023-07-12 11:16 ` Suman Ghosh [this message]
2023-07-12 12:39 ` [net PATCH 2/3] octeontx2-af: Fix hash extraction enable configuration Leon Romanovsky
2023-07-13 5:20 ` Jakub Kicinski
2023-07-14 7:07 ` [EXT] " Suman Ghosh
2023-07-12 11:16 ` [net PATCH 3/3] octeontx2-af: Fix hash configuration for both source and destination IPv6 Suman Ghosh
2023-07-12 12:39 ` Leon Romanovsky
2023-07-13 5:21 ` [net PATCH 0/3] octeontx2-af: Fix issues with NPC field hash extract Jakub Kicinski
2023-07-14 7:06 ` [EXT] " Suman Ghosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230712111604.2290974-3-sumang@marvell.com \
--to=sumang@marvell.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gakula@marvell.com \
--cc=hkelam@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®