From: Suman Ghosh <sumang@marvell.com>
To: <sgoutham@marvell.com>, <gakula@marvell.com>,
<sbhatta@marvell.com>, <hkelam@marvell.com>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: Suman Ghosh <sumang@marvell.com>
Subject: [net PATCH V2 3/3] octeontx2-af: Fix hash configuration for both source and destination IPv6
Date: Fri, 14 Jul 2023 12:41:41 +0530 [thread overview]
Message-ID: <20230714071141.2428144-4-sumang@marvell.com> (raw)
In-Reply-To: <20230714071141.2428144-1-sumang@marvell.com>
As of today, hash reduction was supported only for source IPv6 address
and that calculation also was not correct. This patch fixes that and adds
supports for both source and destination IPv6 address.
Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
---
.../marvell/octeontx2/af/rvu_npc_hash.c | 37 +++++++++----------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
index 76553e0c216f..e7b71f2f3ad3 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
@@ -100,20 +100,20 @@ u32 npc_field_hash_calc(u64 *ldata, struct npc_get_field_hash_info_rsp rsp,
return field_hash;
}
-static u64 npc_update_use_hash(int lt, int ld)
+static u64 npc_update_use_hash(struct rvu *rvu, int blkaddr,
+ u8 intf, int lid, int lt, int ld)
{
- u64 cfg = 0;
-
- switch (lt) {
- case NPC_LT_LC_IP6:
- /* Update use_hash(bit-20) and bytesm1 (bit-16:19)
- * in KEX_LD_CFG
- */
- cfg = KEX_LD_CFG_USE_HASH(0x1, 0x03,
- ld ? 0x8 : 0x18,
- 0x1, 0x0, 0x10);
- break;
- }
+ u8 hdr, key;
+ u64 cfg;
+
+ cfg = rvu_read64(rvu, blkaddr, NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf, lid, lt, ld));
+ hdr = FIELD_GET(NPC_HDR_OFFSET, cfg);
+ key = FIELD_GET(NPC_KEY_OFFSET, cfg);
+
+ /* Update use_hash(bit-20) to 'true' and
+ * bytesm1(bit-16:19) to '0x3' in KEX_LD_CFG
+ */
+ cfg = KEX_LD_CFG_USE_HASH(0x1, 0x03, hdr, 0x1, 0x0, key);
return cfg;
}
@@ -132,12 +132,12 @@ static void npc_program_mkex_hash_rx(struct rvu *rvu, int blkaddr,
for (lt = 0; lt < NPC_MAX_LT; lt++) {
for (ld = 0; ld < NPC_MAX_LD; ld++) {
if (mkex_hash->lid_lt_ld_hash_en[intf][lid][lt][ld]) {
- u64 cfg = npc_update_use_hash(lt, ld);
+ u64 cfg;
- hash_cnt++;
if (hash_cnt == NPC_MAX_HASH)
return;
+ cfg = npc_update_use_hash(rvu, blkaddr, intf, lid, lt, ld);
/* Set updated KEX configuration */
SET_KEX_LD(intf, lid, lt, ld, cfg);
/* Set HASH configuration */
@@ -149,6 +149,7 @@ static void npc_program_mkex_hash_rx(struct rvu *rvu, int blkaddr,
mkex_hash->hash_mask[intf][ld][1]);
SET_KEX_LD_HASH_CTRL(intf, ld,
mkex_hash->hash_ctrl[intf][ld]);
+ hash_cnt++;
}
}
}
@@ -169,12 +170,12 @@ static void npc_program_mkex_hash_tx(struct rvu *rvu, int blkaddr,
for (lt = 0; lt < NPC_MAX_LT; lt++) {
for (ld = 0; ld < NPC_MAX_LD; ld++)
if (mkex_hash->lid_lt_ld_hash_en[intf][lid][lt][ld]) {
- u64 cfg = npc_update_use_hash(lt, ld);
+ u64 cfg;
- hash_cnt++;
if (hash_cnt == NPC_MAX_HASH)
return;
+ cfg = npc_update_use_hash(rvu, blkaddr, intf, lid, lt, ld);
/* Set updated KEX configuration */
SET_KEX_LD(intf, lid, lt, ld, cfg);
/* Set HASH configuration */
@@ -187,8 +188,6 @@ static void npc_program_mkex_hash_tx(struct rvu *rvu, int blkaddr,
SET_KEX_LD_HASH_CTRL(intf, ld,
mkex_hash->hash_ctrl[intf][ld]);
hash_cnt++;
- if (hash_cnt == NPC_MAX_HASH)
- return;
}
}
}
--
2.25.1
next prev parent reply other threads:[~2023-07-14 7:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-14 7:11 [net PATCH V2 0/3] octeontx2-af: Fix issues with NPC field hash extract Suman Ghosh
2023-07-14 7:11 ` [net PATCH V2 1/3] octeontx2-af: Fix hash extraction mbox message Suman Ghosh
2023-07-14 7:11 ` [net PATCH V2 2/3] octeontx2-af: Fix hash extraction enable configuration Suman Ghosh
2023-07-14 7:11 ` Suman Ghosh [this message]
2023-07-18 20:38 ` [net PATCH V2 0/3] octeontx2-af: Fix issues with NPC field hash extract Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230714071141.2428144-4-sumang@marvell.com \
--to=sumang@marvell.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gakula@marvell.com \
--cc=hkelam@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome