From: Michael Riesch <michael.riesch@wolfvision.net>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Maxime Ripard <mripard@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Sebastian Reichel <sre@kernel.org>,
Gerald Loacker <gerald.loacker@wolfvision.net>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
Michael Riesch <michael.riesch@wolfvision.net>
Subject: [PATCH 4/4] drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support
Date: Tue, 18 Jul 2023 17:31:53 +0200 [thread overview]
Message-ID: <20230718-feature-lcd-panel-v1-4-e9a85d5374fd@wolfvision.net> (raw)
In-Reply-To: <20230718-feature-lcd-panel-v1-0-e9a85d5374fd@wolfvision.net>
The Jasonic JT240MHQS-HWT-EK-E3 is a custom panel using the Sitronix
ST7789V controller. While the controller features a resolution of
320x240, only an area of 280x240 is visible by design.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 29 ++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 729d8d7dbf7f..4c6aed993ba1 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -278,6 +278,21 @@ static const struct drm_display_mode et028013dma_mode = {
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
};
+static const struct drm_display_mode jt240mhqs_hwt_ek_e3_mode = {
+ .clock = 6000,
+ .hdisplay = 240,
+ .hsync_start = 240 + 28,
+ .hsync_end = 240 + 28 + 10,
+ .htotal = 240 + 28 + 10 + 10,
+ .vdisplay = 280,
+ .vsync_start = 280 + 8,
+ .vsync_end = 280 + 8 + 4,
+ .vtotal = 280 + 8 + 4 + 4,
+ .width_mm = 43,
+ .height_mm = 37,
+ .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
static const struct st7789_panel_info default_panel = {
.mode = &default_mode,
.invert_mode = true,
@@ -302,6 +317,17 @@ static const struct st7789_panel_info et028013dma_panel = {
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
};
+static const struct st7789_panel_info jt240mhqs_hwt_ek_e3_panel = {
+ .mode = &jt240mhqs_hwt_ek_e3_mode,
+ .invert_mode = true,
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+ .partial_mode = true,
+ .partial_start = 38,
+ .partial_end = 318,
+};
+
static int st7789v_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -612,6 +638,7 @@ static const struct spi_device_id st7789v_spi_id[] = {
{ "st7789v", (unsigned long) &default_panel },
{ "t28cp45tn89-v17", (unsigned long) &t28cp45tn89_panel },
{ "et028013dma", (unsigned long) &et028013dma_panel },
+ { "jt240mhqs-hwt-ek-e3", (unsigned long) &jt240mhqs_hwt_ek_e3_panel },
{ }
};
MODULE_DEVICE_TABLE(spi, st7789v_spi_id);
@@ -620,6 +647,8 @@ static const struct of_device_id st7789v_of_match[] = {
{ .compatible = "sitronix,st7789v", .data = &default_panel },
{ .compatible = "inanbo,t28cp45tn89-v17", .data = &t28cp45tn89_panel },
{ .compatible = "edt,et028013dma", .data = &et028013dma_panel },
+ { .compatible = "jasonic,jt240mhqs-hwt-ek-e3",
+ .data = &jt240mhqs_hwt_ek_e3_panel },
{ }
};
MODULE_DEVICE_TABLE(of, st7789v_of_match);
--
2.30.2
next prev parent reply other threads:[~2023-07-18 15:32 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-18 15:31 [PATCH 0/4] drm/panel: sitronix-st7789v: add support for partial mode Michael Riesch
2023-07-18 15:31 ` [PATCH 1/4] dt-bindings: vendor-prefixes: add jasonic Michael Riesch
2023-07-18 15:56 ` Conor Dooley
2023-07-18 15:31 ` [PATCH 2/4] dt-bindings: display: st7789v: add jasonic jt240mhqs-hwt-ek-e3 display Michael Riesch
2023-07-18 16:04 ` Conor Dooley
2023-07-18 15:31 ` [PATCH 3/4] drm/panel: sitronix-st7789v: add support for partial mode Michael Riesch
2023-07-19 6:39 ` Maxime Ripard
2023-08-02 12:34 ` Michael Riesch
2023-08-02 12:47 ` Maxime Ripard
2023-08-02 15:03 ` Michael Riesch
2023-08-04 8:41 ` Neil Armstrong
2023-08-04 9:45 ` Michael Riesch
2023-07-18 15:31 ` Michael Riesch [this message]
2023-08-02 14:25 ` [PATCH 0/4] " Daniel Vetter
2023-08-03 8:11 ` Neil Armstrong
2023-08-03 8:48 ` Maxime Ripard
2023-08-03 8:51 ` Daniel Vetter
2023-08-03 9:22 ` Maxime Ripard
2023-08-03 9:30 ` Neil Armstrong
2023-08-03 9:38 ` Maxime Ripard
2023-08-03 10:26 ` Daniel Vetter
2023-08-03 11:43 ` Maxime Ripard
2023-08-03 12:34 ` Neil Armstrong
2023-08-03 12:44 ` Maxime Ripard
2023-08-03 14:55 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230718-feature-lcd-panel-v1-4-e9a85d5374fd@wolfvision.net \
--to=michael.riesch@wolfvision.net \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gerald.loacker@wolfvision.net \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®