From: Andrej Picej <andrej.picej@norik.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, S.Riedmueller@phytec.de,
S.Mueller-Klieser@phytec.de, upstream@phytec.de
Subject: [PATCH v2 1/3] ARM: dts: imx6: phytec: fix RTC interrupt level
Date: Wed, 19 Jul 2023 13:43:26 +0200 [thread overview]
Message-ID: <20230719114328.2239818-1-andrej.picej@norik.com> (raw)
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Changes in v2:
- no changes
---
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 1a599c294ab8..1ca4d219609f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -182,7 +182,7 @@ i2c_rtc: rtc@68 {
pinctrl-0 = <&pinctrl_rtc_int>;
reg = <0x68>;
interrupt-parent = <&gpio7>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
};
--
2.25.1
next reply other threads:[~2023-07-19 11:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-19 11:43 Andrej Picej [this message]
2023-07-19 11:43 ` [PATCH v2 2/3] ARM: dts: imx6: pfla02: Rely on PMIC reboot/reset handler Andrej Picej
2023-07-19 11:50 ` Stefan Riedmüller
2023-07-30 6:41 ` Shawn Guo
2023-07-19 11:43 ` [PATCH v2 3/3] ARM: dts: imx6: phycore: " Andrej Picej
2023-07-19 11:50 ` Stefan Riedmüller
2023-07-30 6:42 ` Shawn Guo
2023-07-19 11:49 ` [PATCH v2 1/3] ARM: dts: imx6: phytec: fix RTC interrupt level Stefan Riedmüller
2023-07-30 6:34 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230719114328.2239818-1-andrej.picej@norik.com \
--to=andrej.picej@norik.com \
--cc=S.Mueller-Klieser@phytec.de \
--cc=S.Riedmueller@phytec.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=upstream@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®