mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yue Haibing <yuehaibing@huawei.com>
To: <davem@davemloft.net>, <dsahern@kernel.org>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<yoshfuji@linux-ipv6.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Yue Haibing <yuehaibing@huawei.com>
Subject: [PATCH] ip6mr: Fix skb_under_panic in ip6mr_cache_report()
Date: Fri, 28 Jul 2023 18:00:35 +0800	[thread overview]
Message-ID: <20230728100035.32092-1-yuehaibing@huawei.com> (raw)

 skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
 ------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:192!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN
 CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:skb_panic+0x152/0x1d0
 Call Trace:
  <TASK>
  skb_push+0xc4/0xe0
  ip6mr_cache_report+0xd69/0x19b0
  reg_vif_xmit+0x406/0x690
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  vlan_dev_hard_start_xmit+0x3ab/0x5c0
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  neigh_connected_output+0x3ed/0x570
  ip6_finish_output2+0x5b5/0x1950
  ip6_finish_output+0x693/0x11c0
  ip6_output+0x24b/0x880
  NF_HOOK.constprop.0+0xfd/0x530
  ndisc_send_skb+0x9db/0x1400
  ndisc_send_rs+0x12a/0x6c0
  addrconf_dad_completed+0x3c9/0xea0
  addrconf_dad_work+0x849/0x1420
  process_one_work+0xa22/0x16e0
  worker_thread+0x679/0x10c0
  ret_from_fork+0x28/0x60
  ret_from_fork_asm+0x11/0x20

When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
    ip6mr_cache_report()
        skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declar as this:
	void *skb_push(struct sk_buff *skb, unsigned int len);
		skb->data -= len;
		//0xffff888f5f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
---
 net/ipv6/ip6mr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index cc3d5ad17257..ee9c2ff8b0e4 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1051,9 +1051,9 @@ static int ip6mr_cache_report(const struct mr_table *mrt, struct sk_buff *pkt,
 	int ret;
 
 #ifdef CONFIG_IPV6_PIMSM_V2
+	int nhoff = skb_network_offset(pkt);
 	if (assert == MRT6MSG_WHOLEPKT || assert == MRT6MSG_WRMIFWHOLE)
-		skb = skb_realloc_headroom(pkt, -skb_network_offset(pkt)
-						+sizeof(*msg));
+		skb = skb_realloc_headroom(pkt, -nhoff + sizeof(*msg));
 	else
 #endif
 		skb = alloc_skb(sizeof(struct ipv6hdr) + sizeof(*msg), GFP_ATOMIC);
@@ -1073,7 +1073,8 @@ static int ip6mr_cache_report(const struct mr_table *mrt, struct sk_buff *pkt,
 		   And all this only to mangle msg->im6_msgtype and
 		   to set msg->im6_mbz to "mbz" :-)
 		 */
-		skb_push(skb, -skb_network_offset(pkt));
+		skb->data += nhoff;
+		skb->len  -= nhoff;
 
 		skb_push(skb, sizeof(*msg));
 		skb_reset_transport_header(skb);
-- 
2.34.1


             reply	other threads:[~2023-07-28 10:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-28 10:00 Yue Haibing [this message]
2023-07-28 10:27 ` Simon Horman
2023-07-28 10:50 ` Eric Dumazet
2023-07-28 12:00   ` YueHaibing

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230728100035.32092-1-yuehaibing@huawei.com \
    --to=yuehaibing@huawei.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®