From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Andrew Cooper <andrew.cooper3@citrix.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Paolo Bonzini <pbonzini@redhat.com>, Wei Liu <wei.liu@kernel.org>,
Arjan van de Ven <arjan@linux.intel.com>,
Juergen Gross <jgross@suse.com>,
Michael Kelley <mikelley@microsoft.com>,
Peter Keresztes Schmidt <peter@keresztesschmidt.de>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>
Subject: [patch V3 21/60] x86/apic/32: Sanitize logical APIC ID handling
Date: Tue, 1 Aug 2023 12:47:07 +0200 (CEST) [thread overview]
Message-ID: <20230801103816.311443621@linutronix.de> (raw)
In-Reply-To: <20230801103042.936020332@linutronix.de>
apic::x86_32_early_logical_apicid() is yet another historical joke.
It is used to preset the x86_cpu_to_logical_apicid per CPU variable during
APIC enumeration with:
- 1 shifted left by the CPU number
- the physical APIC ID in case of bigsmp
The latter is hillarious because bigsmp uses physical destination mode
which never can use the logical APIC ID.
It gets even worse. As bigsmp can be enforced late in the boot process the
probe function overwrites the per CPU variable which is never used for this
APIC type once again.
Remove that gunk and store 1 << cpunr unconditionally if and only if the
CPU number is less than 8, because the default logical destination mode
only allows up to 8 CPUs.
This is just an intermediate step before removing the per CPU insanity
completely. Stay tuned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
arch/x86/include/asm/apic.h | 13 -------------
arch/x86/kernel/apic/apic.c | 4 ++--
arch/x86/kernel/apic/apic_noop.c | 11 -----------
arch/x86/kernel/apic/bigsmp_32.c | 18 ------------------
arch/x86/kernel/apic/probe_32.c | 7 -------
5 files changed, 2 insertions(+), 51 deletions(-)
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -315,19 +315,6 @@ struct apic {
/* wakeup secondary CPU using 64-bit wakeup point */
int (*wakeup_secondary_cpu_64)(int apicid, unsigned long start_eip);
-#ifdef CONFIG_X86_32
- /*
- * Called very early during boot from get_smp_config(). It should
- * return the logical apicid. x86_[bios]_cpu_to_apicid is
- * initialized before this function is called.
- *
- * If logical apicid can't be determined that early, the function
- * may return BAD_APICID. Logical apicid will be configured after
- * init_apic_ldr() while bringing up CPUs. Note that NUMA affinity
- * won't be applied properly during early boot in this case.
- */
- int (*x86_32_early_logical_apicid)(int cpu);
-#endif
char *name;
};
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2435,8 +2435,8 @@ static void cpu_update_apic(int cpu, int
early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
#endif
#ifdef CONFIG_X86_32
- early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
- apic->x86_32_early_logical_apicid(cpu);
+ if (cpu < 8)
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = 1U << cpu;
#endif
set_cpu_possible(cpu, true);
physid_set(apicid, phys_cpu_present_map);
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -80,13 +80,6 @@ static void noop_apic_write(u32 reg, u32
WARN_ON_ONCE(boot_cpu_has(X86_FEATURE_APIC) && !apic_is_disabled);
}
-#ifdef CONFIG_X86_32
-static int noop_x86_32_early_logical_apicid(int cpu)
-{
- return BAD_APICID;
-}
-#endif
-
struct apic apic_noop __ro_after_init = {
.name = "noop",
.probe = noop_probe,
@@ -130,8 +123,4 @@ struct apic apic_noop __ro_after_init =
.icr_write = noop_apic_icr_write,
.wait_icr_idle = noop_apic_wait_icr_idle,
.safe_wait_icr_idle = noop_safe_apic_wait_icr_idle,
-
-#ifdef CONFIG_X86_32
- .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
-#endif
};
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -28,12 +28,6 @@ static bool bigsmp_check_apicid_used(phy
return false;
}
-static int bigsmp_early_logical_apicid(int cpu)
-{
- /* on bigsmp, logical apicid is the same as physical */
- return early_per_cpu(x86_cpu_to_apicid, cpu);
-}
-
/*
* bigsmp enables physical destination mode
* and doesn't use LDR and DFR
@@ -154,27 +148,15 @@ static struct apic apic_bigsmp __ro_afte
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = bigsmp_early_logical_apicid,
};
void __init generic_bigsmp_probe(void)
{
- unsigned int cpu;
-
if (!probe_bigsmp())
return;
apic = &apic_bigsmp;
- for_each_possible_cpu(cpu) {
- if (early_per_cpu(x86_cpu_to_logical_apicid,
- cpu) == BAD_APICID)
- continue;
- early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
- bigsmp_early_logical_apicid(cpu);
- }
-
pr_info("Overriding APIC driver with %s\n", apic_bigsmp.name);
}
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -16,11 +16,6 @@
#include "local.h"
-static int default_x86_32_early_logical_apicid(int cpu)
-{
- return 1 << cpu;
-}
-
static void setup_apic_flat_routing(void)
{
#ifdef CONFIG_X86_IO_APIC
@@ -101,8 +96,6 @@ static struct apic apic_default __ro_aft
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid,
};
apic_driver(apic_default);
next prev parent reply other threads:[~2023-08-01 10:48 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-01 10:46 [patch V3 00/60] x86/apic: Decrapification and static calls Thomas Gleixner
2023-08-01 10:46 ` [patch V3 01/60] x86/cpu: Make identify_boot_cpu() static Thomas Gleixner
2023-08-01 10:46 ` [patch V3 02/60] x86/cpu: Remove unused physid_*() nonsense Thomas Gleixner
2023-08-01 10:46 ` [patch V3 03/60] x86/apic: Rename disable_apic Thomas Gleixner
2023-08-01 10:46 ` [patch V3 04/60] x86/apic/ioapic: Rename skip_ioapic_setup Thomas Gleixner
2023-08-01 10:46 ` [patch V3 05/60] x86/apic: Remove pointless x86_bios_cpu_apicid Thomas Gleixner
2023-08-01 10:46 ` [patch V3 06/60] x86/apic: Get rid of hard_smp_processor_id() Thomas Gleixner
2023-08-01 10:46 ` [patch V3 07/60] x86/apic: Remove unused max_physical_apicid Thomas Gleixner
2023-08-01 10:46 ` [patch V3 08/60] x86/apic: Nuke unused apic::inquire_remote_apic() Thomas Gleixner
2023-08-01 10:46 ` [patch V3 09/60] x86/apic: Get rid of boot_cpu_physical_apicid madness Thomas Gleixner
2023-08-01 10:46 ` [patch V3 10/60] x86/apic: Register boot CPU APIC early Thomas Gleixner
2023-08-01 10:46 ` [patch V3 11/60] x86/apic: Remove the pointless APIC version check Thomas Gleixner
2023-08-01 10:46 ` [patch V3 12/60] x86/of: Fix the APIC address registration Thomas Gleixner
2023-08-03 22:42 ` Dave Hansen
2023-08-03 23:35 ` Thomas Gleixner
2023-08-01 10:46 ` [patch V3 13/60] x86/apic: Make some APIC init functions bool Thomas Gleixner
2023-08-01 10:46 ` [patch V3 14/60] x86/apic: Split register_apic_address() Thomas Gleixner
2023-08-01 10:46 ` [patch V3 15/60] x86/apic: Sanitize APIC address setup Thomas Gleixner
2023-08-01 10:47 ` [patch V3 16/60] x86/xen/pv: Pretend that it found SMP configuration Thomas Gleixner
2023-08-01 10:47 ` [patch V3 17/60] x86/apic: Sanitize num_processors handling Thomas Gleixner
2023-08-01 10:47 ` [patch V3 18/60] x86/apic: Nuke another processor check Thomas Gleixner
2023-08-01 10:47 ` [patch V3 19/60] x86/apic: Remove check_phys_apicid_present() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 20/60] x86/apic: Get rid of apic_phys Thomas Gleixner
2023-08-01 10:47 ` Thomas Gleixner [this message]
2023-08-01 10:47 ` [patch V3 22/60] x86/apic/32: Remove x86_cpu_to_logical_apicid Thomas Gleixner
2023-08-01 10:47 ` [patch V3 23/60] x86/apic/ipi: Code cleanup Thomas Gleixner
2023-08-01 10:47 ` [patch V3 24/60] x86/apic: Mop up early_per_cpu() abuse Thomas Gleixner
2023-08-01 10:47 ` [patch V3 25/60] x86/apic/32: Remove pointless default_acpi_madt_oem_check() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 26/60] x86/apic/32: Decrapify the def_bigsmp mechanism Thomas Gleixner
2023-08-07 20:11 ` Dave Hansen
2023-08-07 21:18 ` Thomas Gleixner
2023-08-01 10:47 ` [patch V3 27/60] x86/apic/32: Remove bigsmp_cpu_present_to_apicid() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 28/60] x86/apic: Nuke empty init_apic_ldr() callbacks Thomas Gleixner
2023-08-01 10:47 ` [patch V3 29/60] x86/apic: Nuke apic::apicid_to_cpu_present() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 30/60] x86/ioapic/32: Decrapify phys_id_present_map operation Thomas Gleixner
2023-08-01 10:47 ` [patch V3 31/60] x86/apic: Mop up *setup_apic_routing() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 32/60] x86/apic: Mop up apic::apic_id_registered() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 33/60] x86/apic/ipi: Tidy up the code and fixup comments Thomas Gleixner
2023-08-01 10:47 ` [patch V3 34/60] x86/apic: Consolidate wait_icr_idle() implementations Thomas Gleixner
2023-08-01 10:47 ` [patch V3 35/60] x86/apic: Allow apic::wait_icr_idle() to be NULL Thomas Gleixner
2023-08-01 10:47 ` [patch V3 36/60] x86/apic: Allow apic::safe_wait_icr_idle() " Thomas Gleixner
2023-08-01 10:47 ` [patch V3 37/60] x86/apic: Move safe wait_icr_idle() next to apic_mem_wait_icr_idle() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 38/60] x86/apic/uv: Get rid of wrapper callbacks Thomas Gleixner
2023-08-01 10:47 ` [patch V3 39/60] x86/apic/x2apic: Share all common IPI functions Thomas Gleixner
2023-08-01 10:47 ` [patch V3 40/60] x86/apic/64: Uncopypaste probing Thomas Gleixner
2023-08-01 10:47 ` [patch V3 41/60] x86/apic: Wrap APIC ID validation into an inline Thomas Gleixner
2023-08-01 10:47 ` [patch V3 42/60] x86/apic: Add max_apic_id member Thomas Gleixner
2023-08-01 10:47 ` [patch V3 43/60] x86/apic: Simplify X2APIC ID validation Thomas Gleixner
2023-08-01 10:47 ` [patch V3 44/60] x86/apic: Prepare x2APIC for using apic::max_apic_id Thomas Gleixner
2023-08-01 10:47 ` [patch V3 45/60] x86/apic: Sanitize APID ID range validation Thomas Gleixner
2023-08-08 13:34 ` Qiuxu Zhuo
2023-08-08 18:55 ` Thomas Gleixner
2023-08-09 12:01 ` Zhang, Rui
2023-08-01 10:47 ` [patch V3 46/60] x86/apic: Remove pointless NULL initializations Thomas Gleixner
2023-08-01 10:47 ` [patch V3 47/60] x86/apic/noop: Tidy up the code Thomas Gleixner
2023-08-01 10:47 ` [patch V3 48/60] x86/apic: Remove pointless arguments from [native_]eoi_write() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 49/60] x86/apic: Nuke ack_APIC_irq() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 50/60] x86/apic: Wrap apic->native_eoi() into a helper Thomas Gleixner
2023-08-01 10:47 ` [patch V3 51/60] x86/apic: Provide common init infrastructure Thomas Gleixner
2023-08-09 1:41 ` Qiuxu Zhuo
2023-08-01 10:47 ` [patch V3 52/60] x86/xen/apic: Use standard apic driver mechanism for Xen PV Thomas Gleixner
2023-08-01 10:47 ` [patch V3 53/60] x86/apic: Provide apic_update_callback() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 54/60] x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 55/60] x86/apic: Convert other overrides to apic_update_callback() Thomas Gleixner
2023-08-01 10:47 ` [patch V3 56/60] x86/xen/apic: Mark apic __ro_after_init Thomas Gleixner
2023-08-01 10:47 ` [patch V3 57/60] x86/apic: Mark all hotpath APIC callback wrappers __always_inline Thomas Gleixner
2023-08-01 10:47 ` [patch V3 58/60] x86/apic: Wrap IPI calls into helper functions Thomas Gleixner
2023-08-01 10:47 ` [patch V3 59/60] x86/apic: Provide static call infrastructure for APIC callbacks Thomas Gleixner
2023-08-01 10:47 ` [patch V3 60/60] x86/apic: Turn on static calls Thomas Gleixner
2023-08-02 11:55 ` [patch V3 00/60] x86/apic: Decrapification and " Juergen Gross
2023-08-03 0:05 ` Sohil Mehta
2023-08-03 3:50 ` Michael Kelley (LINUX)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230801103816.311443621@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=arjan@linux.intel.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=pbonzini@redhat.com \
--cc=peter@keresztesschmidt.de \
--cc=peterz@infradead.org \
--cc=thomas.lendacky@amd.com \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®