[PATCH v3 1/3] dt-bindings: hwmon: Add Infineon TDA38640

[Naresh Solanki <naresh.solanki@9elements.com>]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

The TDA38640 chip has different output control mechanisms depending on
its mode of operation. When the chip is in SVID mode, only
hardware-based output control is supported via ENABLE pin. However, when
it operates in PMBus mode, software control works perfectly.

To enable software control as a workaround in SVID mode, add the DT
property 'infineon,en-svid-control'. This property will enable the
workaround, which utilizes ENABLE pin polarity flipping for output when
the chip is in SVID mode.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
 .../hwmon/pmbus/infineon,tda38640.yaml        | 51 +++++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |  2 -
 2 files changed, 51 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
new file mode 100644
index 000000000000..c5924ddf1b47
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description: |
+  The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck
+  Regulator with SVID and I2C designed for Industrial use.
+
+  Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9
+
+properties:
+  compatible:
+    enum:
+      - infineon,tda38640
+
+  reg:
+    maxItems: 1
+
+  infineon,en-svid-control:
+    description: |
+      When enabled, it allows the chip to utilize workaround for
+      software control of output when operating in SVID mode where
+      hardware-based output control is the default behavior.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda38640@40 {
+            compatible = "infineon,tda38640";
+            reg = <0x40>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 40bc475ee7e1..86c7d34f63bf 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -151,8 +151,6 @@ properties:
           - infineon,slb9645tt
             # Infineon SLB9673 I2C TPM 2.0
           - infineon,slb9673
-            # Infineon TDA38640 Voltage Regulator
-          - infineon,tda38640
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
             # Infineon Multi-phase Digital VR Controller xdpe11280

base-commit: cb7022b8976e3c4d12cea2e7bb820a2944e2fd7b
-- 
2.41.0