[PATCH v5 10/11] clk: sunxi-ng: a64: select closest rate for pll-video0

[Frank Oltmanns <frank@oltmanns.dev>]

Selecting the closest rate for pll-video0 instead of the closest rate
that is less than the requested rate has no downside for this clock,
while allowing for selecting a more suitable rate, e.g. for the
connected panels.

Furthermore, the algorithm that sets an NKM clock's parent benefits from
the closest rate. Without it, the NKM clock's rate might drift away from
the requested rate in the multiple successive calls to
ccu_nkm_determine_rate that the clk framework performs when setting a
clock rate.

Therefore, configure pll-video0 and, in consequence, all of its
descendents to select the closest rate.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 33 ++++++++++++++-------------------
 1 file changed, 14 insertions(+), 19 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index a139a5c438d4..73c84d20f3ee 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -68,7 +68,7 @@ static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
 				       BIT(28),	/* lock */
 				       CLK_SET_RATE_UNGATE);
 
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST(pll_video0_clk, "pll-video0",
 						"osc24M", 0x010,
 						192000000,	/* Minimum rate */
 						1008000000,	/* Maximum rate */
@@ -181,6 +181,7 @@ static struct ccu_nkm pll_mipi_clk = {
 		.hw.init	= CLK_HW_INIT("pll-mipi", "pll-video0",
 					      &ccu_nkm_ops,
 					      CLK_SET_RATE_UNGATE | CLK_SET_RATE_PARENT),
+		.features	= CCU_FEATURE_CLOSEST_RATE,
 	},
 };
 
@@ -531,24 +532,18 @@ static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
 
 static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
 static const u8 tcon0_table[] = { 0, 2, };
-static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
+static SUNXI_CCU_MUX_TABLE_WITH_GATE_CLOSEST(tcon0_clk, "tcon0", tcon0_parents,
 				     tcon0_table, 0x118, 24, 3, BIT(31),
 				     CLK_SET_RATE_PARENT);
 
 static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
 static const u8 tcon1_table[] = { 0, 2, };
-static struct ccu_div tcon1_clk = {
-	.enable		= BIT(31),
-	.div		= _SUNXI_CCU_DIV(0, 4),
-	.mux		= _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
-	.common		= {
-		.reg		= 0x11c,
-		.hw.init	= CLK_HW_INIT_PARENTS("tcon1",
-						      tcon1_parents,
-						      &ccu_div_ops,
-						      CLK_SET_RATE_PARENT),
-	},
-};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE_CLOSEST(tcon1_clk, "tcon1", tcon1_parents,
+					       tcon1_table, 0x11c,
+					       0, 4,	/* M */
+					       24, 2,	/* mux */
+					       BIT(31),	/* gate */
+					       CLK_SET_RATE_PARENT);
 
 static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
 static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
@@ -578,8 +573,8 @@ static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 		      0x144, BIT(31), 0);
 
 static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
-static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
-				 0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE_CLOSEST(hdmi_clk, "hdmi", hdmi_parents,
+					 0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(hdmi_ddc_clk,	"hdmi-ddc",	"osc24M",
 		      0x154, BIT(31), 0);
@@ -591,9 +586,9 @@ static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
 
 static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
 static const u8 dsi_dphy_table[] = { 0, 2, };
-static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
-				       dsi_dphy_parents, dsi_dphy_table,
-				       0x168, 0, 4, 8, 2, BIT(15), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE_CLOSEST(dsi_dphy_clk, "dsi-dphy",
+					       dsi_dphy_parents, dsi_dphy_table,
+					       0x168, 0, 4, 8, 2, BIT(15), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
 			     0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);

-- 
2.41.0