[PATCH 1/3] gpio: sprd: Modify the calculation method of eic number

[Wenhua Lin <Wenhua.Lin@unisoc.com>]

Automatic calculation through matching nodes,
subsequent projects can avoid modifying driver files.

Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
---
 drivers/gpio/gpio-eic-sprd.c | 49 +++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index 84352a6f4973..0d85d9e80848 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -50,10 +50,10 @@
 #define SPRD_EIC_SYNC_DATA		0x1c
 
 /*
- * The digital-chip EIC controller can support maximum 3 banks, and each bank
+ * The digital-chip EIC controller can support maximum 8 banks, and each bank
  * contains 8 EICs.
  */
-#define SPRD_EIC_MAX_BANK		3
+#define SPRD_EIC_MAX_BANK		8
 #define SPRD_EIC_PER_BANK_NR		8
 #define SPRD_EIC_DATA_MASK		GENMASK(7, 0)
 #define SPRD_EIC_BIT(x)			((x) & (SPRD_EIC_PER_BANK_NR - 1))
@@ -99,33 +99,32 @@ struct sprd_eic {
 
 struct sprd_eic_variant_data {
 	enum sprd_eic_type type;
-	u32 num_eics;
 };
 
+#define SPRD_EIC_VAR_DATA(soc_name)				\
+static const struct sprd_eic_variant_data soc_name##_eic_dbnc_data = {	\
+	.type = SPRD_EIC_DEBOUNCE,					\
+};									\
+									\
+static const struct sprd_eic_variant_data soc_name##_eic_latch_data = {	\
+	.type = SPRD_EIC_LATCH,						\
+};									\
+									\
+static const struct sprd_eic_variant_data soc_name##_eic_async_data = {	\
+	.type = SPRD_EIC_ASYNC,						\
+};									\
+									\
+static const struct sprd_eic_variant_data soc_name##_eic_sync_data = {	\
+	.type = SPRD_EIC_SYNC,						\
+}
+
+SPRD_EIC_VAR_DATA(sc9860);
+
 static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
 	"eic-debounce", "eic-latch", "eic-async",
 	"eic-sync",
 };
 
-static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
-	.type = SPRD_EIC_DEBOUNCE,
-	.num_eics = 8,
-};
-
-static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
-	.type = SPRD_EIC_LATCH,
-	.num_eics = 8,
-};
-
-static const struct sprd_eic_variant_data sc9860_eic_async_data = {
-	.type = SPRD_EIC_ASYNC,
-	.num_eics = 8,
-};
-
-static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
-	.type = SPRD_EIC_SYNC,
-	.num_eics = 8,
-};
 
 static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
 						 unsigned int bank)
@@ -583,6 +582,7 @@ static int sprd_eic_probe(struct platform_device *pdev)
 	struct sprd_eic *sprd_eic;
 	struct resource *res;
 	int ret, i;
+	u16 num_banks = 0;
 
 	pdata = of_device_get_match_data(&pdev->dev);
 	if (!pdata) {
@@ -613,12 +613,13 @@ static int sprd_eic_probe(struct platform_device *pdev)
 			break;
 
 		sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
+		num_banks++;
 		if (IS_ERR(sprd_eic->base[i]))
 			return PTR_ERR(sprd_eic->base[i]);
 	}
 
 	sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
-	sprd_eic->chip.ngpio = pdata->num_eics;
+	sprd_eic->chip.ngpio = num_banks * SPRD_EIC_PER_BANK_NR;
 	sprd_eic->chip.base = -1;
 	sprd_eic->chip.parent = &pdev->dev;
 	sprd_eic->chip.direction_input = sprd_eic_direction_input;
@@ -630,10 +631,12 @@ static int sprd_eic_probe(struct platform_device *pdev)
 		sprd_eic->chip.set = sprd_eic_set;
 		fallthrough;
 	case SPRD_EIC_ASYNC:
+		fallthrough;
 	case SPRD_EIC_SYNC:
 		sprd_eic->chip.get = sprd_eic_get;
 		break;
 	case SPRD_EIC_LATCH:
+		fallthrough;
 	default:
 		break;
 	}
-- 
2.17.1