From: Raag Jadav <raag.jadav@intel.com>
To: linus.walleij@linaro.org, mika.westerberg@linux.intel.com,
andriy.shevchenko@linux.intel.com
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
mallikarjunappa.sangannavar@intel.com, pandith.n@intel.com,
Raag Jadav <raag.jadav@intel.com>
Subject: [PATCH v1] pinctrl: baytrail: consolidate common mask operation
Date: Tue, 8 Aug 2023 14:19:01 +0530 [thread overview]
Message-ID: <20230808084901.18927-1-raag.jadav@intel.com> (raw)
Consolidate common mask operation outside of switch cases and
limit IO operations to positive cases.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 34 +++++++++++-------------
1 file changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 27aef62fc7c0..02ab5fd7cbd5 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -995,8 +995,8 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG);
+ u32 conf, val, db_pulse, debounce;
unsigned long flags;
- u32 conf, val, debounce;
int i, ret = 0;
raw_spin_lock_irqsave(&byt_lock, flags);
@@ -1053,8 +1053,6 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
break;
case PIN_CONFIG_INPUT_DEBOUNCE:
- debounce = readl(db_reg);
-
if (arg)
conf |= BYT_DEBOUNCE_EN;
else
@@ -1062,32 +1060,25 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
switch (arg) {
case 375:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_375US;
+ db_pulse = BYT_DEBOUNCE_PULSE_375US;
break;
case 750:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_750US;
+ db_pulse = BYT_DEBOUNCE_PULSE_750US;
break;
case 1500:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_1500US;
+ db_pulse = BYT_DEBOUNCE_PULSE_1500US;
break;
case 3000:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_3MS;
+ db_pulse = BYT_DEBOUNCE_PULSE_3MS;
break;
case 6000:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_6MS;
+ db_pulse = BYT_DEBOUNCE_PULSE_6MS;
break;
case 12000:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_12MS;
+ db_pulse = BYT_DEBOUNCE_PULSE_12MS;
break;
case 24000:
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
- debounce |= BYT_DEBOUNCE_PULSE_24MS;
+ db_pulse = BYT_DEBOUNCE_PULSE_24MS;
break;
default:
if (arg)
@@ -1095,8 +1086,13 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
break;
}
- if (!ret)
- writel(debounce, db_reg);
+ if (ret)
+ break;
+
+ debounce = readl(db_reg);
+ debounce = (debounce & ~BYT_DEBOUNCE_PULSE_MASK) | db_pulse;
+ writel(debounce, db_reg);
+
break;
default:
ret = -ENOTSUPP;
--
2.17.1
next reply other threads:[~2023-08-08 20:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-08 8:49 Raag Jadav [this message]
2023-08-08 13:41 ` Mika Westerberg
2023-08-15 12:58 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230808084901.18927-1-raag.jadav@intel.com \
--to=raag.jadav@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mallikarjunappa.sangannavar@intel.com \
--cc=mika.westerberg@linux.intel.com \
--cc=pandith.n@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®