mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
	wtli@nuvoton.com, u.kleine-koenig@pengutronix.de,
	alsa-devel@alsa-project.org
Subject: [PATCH AUTOSEL 6.4 17/54] ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect
Date: Sun, 13 Aug 2023 11:48:56 -0400	[thread overview]
Message-ID: <20230813154934.1067569-17-sashal@kernel.org> (raw)
In-Reply-To: <20230813154934.1067569-1-sashal@kernel.org>

From: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>

[ Upstream commit 1bc40efdaf4a0ccfdb10a1c8e4b458f4764e8e5f ]

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that
jack-detection will work properly on this laptop.

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230719200241.4865-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/nau8821.c | 41 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c
index fee970427a243..42de7588fdb68 100644
--- a/sound/soc/codecs/nau8821.c
+++ b/sound/soc/codecs/nau8821.c
@@ -10,6 +10,7 @@
 #include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
@@ -25,6 +26,13 @@
 #include <sound/tlv.h>
 #include "nau8821.h"
 
+#define NAU8821_JD_ACTIVE_HIGH			BIT(0)
+
+static int nau8821_quirk;
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, uint, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
+
 #define NAU_FREF_MAX 13500000
 #define NAU_FVCO_MAX 100000000
 #define NAU_FVCO_MIN 90000000
@@ -1792,6 +1800,33 @@ static int nau8821_setup_irq(struct nau8821 *nau8821)
 	return 0;
 }
 
+/* Please keep this list alphabetically sorted */
+static const struct dmi_system_id nau8821_quirk_table[] = {
+	{
+		/* Positivo CW14Q01P-V2 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"),
+			DMI_MATCH(DMI_BOARD_NAME, "CW14Q01P-V2"),
+		},
+		.driver_data = (void *)(NAU8821_JD_ACTIVE_HIGH),
+	},
+	{}
+};
+
+static void nau8821_check_quirks(void)
+{
+	const struct dmi_system_id *dmi_id;
+
+	if (quirk_override != -1) {
+		nau8821_quirk = quirk_override;
+		return;
+	}
+
+	dmi_id = dmi_first_match(nau8821_quirk_table);
+	if (dmi_id)
+		nau8821_quirk = (unsigned long)dmi_id->driver_data;
+}
+
 static int nau8821_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
@@ -1812,6 +1847,12 @@ static int nau8821_i2c_probe(struct i2c_client *i2c)
 
 	nau8821->dev = dev;
 	nau8821->irq = i2c->irq;
+
+	nau8821_check_quirks();
+
+	if (nau8821_quirk & NAU8821_JD_ACTIVE_HIGH)
+		nau8821->jkdet_polarity = 0;
+
 	nau8821_print_device_properties(nau8821);
 
 	nau8821_reset_chip(nau8821->regmap);
-- 
2.40.1


  parent reply	other threads:[~2023-08-13 15:50 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-13 15:48 [PATCH AUTOSEL 6.4 01/54] ksmbd: Fix unsigned expression compared with zero Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 02/54] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 03/54] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 04/54] media: amphion: use dev_err_probe Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 05/54] media: imx-jpeg: Support to assign slot for encoder/decoder Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 06/54] media: pulse8-cec: handle possible ping error Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 07/54] media: pci: cx23885: fix error handling for cx23885 ATSC boards Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 08/54] platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 09/54] 9p: virtio: fix unlikely null pointer deref in handle_rerror Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 10/54] 9p: virtio: make sure 'offs' is initialized in zc_request Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 11/54] ksmbd: fix out of bounds in smb3_decrypt_req() Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 12/54] ksmbd: validate session id and tree id in compound request Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 13/54] ksmbd: no response from compound read Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 14/54] ksmbd: fix out of bounds in init_smb2_rsp_hdr() Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 15/54] ASoC: da7219: Flush pending AAD IRQ when suspending Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 16/54] ASoC: da7219: Check for failure reading AAD IRQ events Sasha Levin
2023-08-13 15:48 ` Sasha Levin [this message]
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 18/54] thermal: core: constify params in thermal_zone_device_register Sasha Levin
2023-08-22 10:43   ` Pavel Machek
2023-08-22 11:31     ` Greg KH
2023-09-05  6:03       ` Ahmad Fatoum
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 19/54] net: hns3: add tm flush when setting tm Sasha Levin
2023-08-13 15:48 ` [PATCH AUTOSEL 6.4 20/54] ethernet: atheros: fix return value check in atl1c_tso_csum() Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 21/54] vxlan: generalize vxlan_parse_gpe_hdr and remove unused args Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 22/54] m68k: Fix invalid .section syntax Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 23/54] btrfs: remove BUG_ON()'s in add_new_free_space() Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 24/54] s390/dasd: use correct number of retries for ERP requests Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 25/54] s390/dasd: fix hanging device after request requeue Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 26/54] fs/nls: make load_nls() take a const parameter Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 27/54] cifs: fix charset issue in reconnection Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 28/54] ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0 Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 29/54] ASoc: codecs: ES8316: Fix DMIC config Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 30/54] ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0 Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 31/54] ASoC: rt711: " Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 32/54] ASoC: rt711-sdca: " Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 33/54] ASoC: atmel: Fix the 8K sample parameter in I2SC master Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 34/54] ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 35/54] platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 36/54] platform/x86/amd/pmf: Notify OS power slider update Sasha Levin
2023-08-22 10:44   ` Pavel Machek
2023-08-22 14:46     ` Mario Limonciello
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 37/54] platform/x86: intel: hid: Always call BTNL ACPI method Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 38/54] platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 39/54] platform/x86: think-lmi: Use kfree_sensitive instead of kfree Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 40/54] platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 41/54] platform/x86: huawei-wmi: Silence ambient light sensor Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 42/54] drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 43/54] drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 44/54] drm/amd/display: Exit idle optimizations before attempt to access PHY Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 45/54] ovl: Always reevaluate the file signature for IMA Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 46/54] ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer() Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 47/54] rbd: make get_lock_owner_info() return a single locker or NULL Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 48/54] rbd: harden get_lock_owner_info() a bit Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 49/54] ALSA: usb-audio: Update for native DSD support quirks Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 50/54] staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 51/54] LoongArch: Only fiddle with CHECKFLAGS if `need-compiler' Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 52/54] LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 53/54] security: keys: perform capable check only on privileged operations Sasha Levin
2023-08-13 15:49 ` [PATCH AUTOSEL 6.4 54/54] kprobes: Prohibit probing on CFI preamble symbol Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230813154934.1067569-17-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=edson.drosdeck@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wtli@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®