From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
linux-pci@vger.kernel.org, Saeed Mahameed <saeedm@nvidia.com>,
Leon Romanovsky <leon@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Moshe Shemesh <moshe@mellanox.com>,
netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 1/1] net/mlx5: Convert PCI error values to generic errnos
Date: Mon, 14 Aug 2023 16:27:20 +0300 [thread overview]
Message-ID: <20230814132721.26608-1-ilpo.jarvinen@linux.intel.com> (raw)
mlx5_pci_link_toggle() returns mix PCI specific error codes and generic
errnos.
Convert the PCI specific error values to generic errno using
pcibios_err_to_errno() before returning them.
Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Fixes: 212b4d7251c1 ("net/mlx5: Wait for firmware to enable CRS before pci_restore_state")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Maintainers beware, this will conflict with read+write -> set/clear_word
fixes in pci.git/pcie-rmw. As such, it might be the easiest for Bjorn to
take it instead of net people.
I wonder if these PCIBIOS_* error codes are useful at all? There's 1:1
mapping into errno values so no information loss if the functions would just
return errnos directly. Perhaps this is just legacy nobody has bothered to
remove? If nobody opposes, I could take a look at getting rid of them.
---
drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 4804990b7f22..0afd9dbfc471 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -371,7 +371,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, &dev_id);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
err = mlx5_check_dev_ids(dev, dev_id);
if (err)
return err;
@@ -386,16 +386,16 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
/* PCI link toggle */
err = pci_read_config_word(bridge, cap + PCI_EXP_LNKCTL, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
reg16 |= PCI_EXP_LNKCTL_LD;
err = pci_write_config_word(bridge, cap + PCI_EXP_LNKCTL, reg16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
msleep(500);
reg16 &= ~PCI_EXP_LNKCTL_LD;
err = pci_write_config_word(bridge, cap + PCI_EXP_LNKCTL, reg16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
/* Check link */
if (!bridge->link_active_reporting) {
@@ -408,7 +408,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
do {
err = pci_read_config_word(bridge, cap + PCI_EXP_LNKSTA, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
if (reg16 & PCI_EXP_LNKSTA_DLLLA)
break;
msleep(20);
@@ -426,7 +426,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
do {
err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
if (reg16 == dev_id)
break;
msleep(20);
--
2.30.2
next reply other threads:[~2023-08-14 13:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 13:27 Ilpo Järvinen [this message]
2023-08-14 22:32 ` Bjorn Helgaas
2023-08-15 11:31 ` Ilpo Järvinen
2023-08-15 17:53 ` Bjorn Helgaas
2023-08-16 21:45 ` Saeed Mahameed
2023-08-16 22:04 ` Bjorn Helgaas
2023-08-16 22:12 ` Saeed Mahameed
2023-08-16 22:15 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230814132721.26608-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=helgaas@kernel.org \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=moshe@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®