From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: Philippe Cornu <philippe.cornu@foss.st.com>,
michael@amarulasolutions.com,
Amarula patchwork <linux-amarula@amarulasolutions.com>,
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH v8 0/4] Add display support on the stm32f746-disco board
Date: Mon, 14 Aug 2023 15:28:40 +0200 [thread overview]
Message-ID: <20230814132844.113312-1-dario.binacchi@amarulasolutions.com> (raw)
The series adds support for the display on the stm32f746-disco board.
Changes in v8:
- Add the patch [3/4] "ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco" to
th series.
- Add the 'power-supply' property to panel-rgb node.
- Move backlight and panel-rgb nodes after the vcc-3v3 node.
Changes in v7:
- Add 'Reviewed-by' tags I forgot in v6.
https://lore.kernel.org/linux-arm-kernel/20230629083726.84910-1-dario.binacchi@amarulasolutions.com/T/
Changes in v6:
- Remove dma nodes from stm32f746-disco.dts, they are not used by LTDC,
so there is no need to enable them.
Changes in v5:
I am confident that framebuffer sizing is a real requirement for STM32 boards,
but I need some time to understand if and how to introduce this functionality.
Therefore, I drop the following patches to allow the series to be fully merged:
- [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property
- [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco
- [6/6] drm/stm: set framebuffer bit depth through DTS property
Changes in v4:
- Use DTS property instead of module parameter to set the framebuffer bit depth.
Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.
- drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next):
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a
- drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc
Dario Binacchi (4):
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: support display on stm32f746-disco board
arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++
arch/arm/boot/dts/st/stm32f746-disco.dts | 50 +++++++++++++++++++++--
arch/arm/boot/dts/st/stm32f746.dtsi | 10 +++++
3 files changed, 92 insertions(+), 3 deletions(-)
--
2.34.1
next reply other threads:[~2023-08-14 13:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 13:28 Dario Binacchi [this message]
2023-08-14 13:28 ` [PATCH v8 1/4] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
2023-08-14 13:28 ` [PATCH v8 2/4] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi
2023-08-14 13:28 ` [PATCH v8 3/4] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco Dario Binacchi
2023-08-14 13:28 ` [PATCH v8 4/4] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
2023-08-16 7:36 ` [PATCH v8 0/4] Add display support on the " Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230814132844.113312-1-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael@amarulasolutions.com \
--cc=philippe.cornu@foss.st.com \
--cc=raphael.gallais-pou@foss.st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®