From: Wenchao Hao <haowenchao2@huawei.com>
To: "James E . J . Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Douglas Gilbert <dgilbert@interlog.com>,
<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <louhongxiang@huawei.com>, Wenchao Hao <haowenchao2@huawei.com>
Subject: [PATCH v4 8/9] scsi:scsi_debug: Add new error injection reset lun failed
Date: Tue, 15 Aug 2023 20:23:15 +0800 [thread overview]
Message-ID: <20230815122316.4129333-9-haowenchao2@huawei.com> (raw)
In-Reply-To: <20230815122316.4129333-1-haowenchao2@huawei.com>
Add error injection type 3 to make scsi_debug_device_reset() return FAILED.
Fail abort command foramt:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x4 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "0 -10 0x12" > ${error}
will make the device return FAILED when try to reset lun with inquiry
command 10 times.
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "0 -10 0xff" > ${error}
will make the device return FAILED when try to reset lun 10 times.
Usually we do not care about what command it is when trying to perform
reset LUN, so 0xff could be applied.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
---
drivers/scsi/scsi_debug.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 9e4ea3b38cd0..2c16e5f4ab28 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -295,6 +295,8 @@ enum sdebug_err_type {
/* with errors set in scsi_cmnd */
ERR_ABORT_CMD_FAILED = 3, /* control return FAILED from */
/* scsi_debug_abort() */
+ ERR_LUN_RESET_FAILED = 4, /* control return FAILED from */
+ /* scsi_debug_device_reseLUN_RESET_FAILEDt() */
};
struct sdebug_err_inject {
@@ -961,6 +963,7 @@ static int sdebug_error_show(struct seq_file *m, void *p)
switch (err->type) {
case ERR_TMOUT_CMD:
case ERR_ABORT_CMD_FAILED:
+ case ERR_LUN_RESET_FAILED:
seq_printf(m, "%d\t%d\t0x%x\n", err->type, err->cnt,
err->cmd);
break;
@@ -1022,6 +1025,7 @@ static ssize_t sdebug_error_write(struct file *file, const char __user *ubuf,
switch (inject_type) {
case ERR_TMOUT_CMD:
case ERR_ABORT_CMD_FAILED:
+ case ERR_LUN_RESET_FAILED:
if (sscanf(buf, "%d %d %hhx", &inject->type, &inject->cnt,
&inject->cmd) != 3)
goto out_error;
@@ -5558,10 +5562,36 @@ static void scsi_debug_stop_all_queued(struct scsi_device *sdp)
scsi_debug_stop_all_queued_iter, sdp);
}
+static int sdebug_fail_lun_reset(struct scsi_cmnd *cmnd)
+{
+ struct scsi_device *sdp = cmnd->device;
+ struct sdebug_dev_info *devip = (struct sdebug_dev_info *)sdp->hostdata;
+ struct sdebug_err_inject *err;
+ unsigned char *cmd = cmnd->cmnd;
+ int ret = 0;
+
+ if (devip == NULL)
+ return 0;
+
+ list_for_each_entry(err, &devip->inject_err_list, list) {
+ if (err->type == ERR_LUN_RESET_FAILED &&
+ (err->cmd == cmd[0] || err->cmd == 0xff)) {
+ ret = !!err->cnt;
+ if (err->cnt < 0)
+ err->cnt++;
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int scsi_debug_device_reset(struct scsi_cmnd *SCpnt)
{
struct scsi_device *sdp = SCpnt->device;
struct sdebug_dev_info *devip = sdp->hostdata;
+ u8 *cmd = SCpnt->cmnd;
+ u8 opcode = cmd[0];
++num_dev_resets;
@@ -5572,6 +5602,11 @@ static int scsi_debug_device_reset(struct scsi_cmnd *SCpnt)
if (devip)
set_bit(SDEBUG_UA_POR, devip->uas_bm);
+ if (sdebug_fail_lun_reset(SCpnt)) {
+ scmd_printk(KERN_INFO, SCpnt, "fail lun reset 0x%x\n", opcode);
+ return FAILED;
+ }
+
return SUCCESS;
}
--
2.35.3
next prev parent reply other threads:[~2023-08-15 12:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-15 12:23 [PATCH v4 0/9] scsi:scsi_debug: Add error injection for single device Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 1/9] scsi:scsi_debug: create scsi_debug directory in the debugfs filesystem Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 2/9] scsi:scsi_debug: Add interface to manage single device's error inject Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 3/9] scsi:scsi_debug: Define grammar to remove added error injection Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 4/9] scsi:scsi_debug: timeout command if the error is injected Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 5/9] scsi:scsi_debug: Return failed value " Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 6/9] scsi:scsi_debug: set command's result and sense data " Wenchao Hao
2023-08-15 12:23 ` [PATCH v4 7/9] scsi:scsi_debug: Add new error injection abort failed Wenchao Hao
2023-08-15 12:23 ` Wenchao Hao [this message]
2023-08-15 12:23 ` [PATCH v4 9/9] scsi:scsi_debug: Add debugfs interface to fail target reset Wenchao Hao
2023-08-18 9:04 ` [PATCH v4 0/9] scsi:scsi_debug: Add error injection for single device haowenchao (C)
2023-08-31 2:11 ` haowenchao (C)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230815122316.4129333-9-haowenchao2@huawei.com \
--to=haowenchao2@huawei.com \
--cc=dgilbert@interlog.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=louhongxiang@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®