mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@linaro.org>
To: "Rafael J . Wysocki" <rafael@kernel.org>,
	Kevin Hilman <khilman@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>, Pavel Machek <pavel@ucw.cz>,
	Len Brown <len.brown@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Taniya Das <tdas@qti.qualcomm.com>
Cc: linux-pm@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-arm-msm@vger.kernel.org,
	Jagadeesh Kona <quic_jkona@quicinc.com>
Subject: [PATCH v2 6/6] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode
Date: Wed, 16 Aug 2023 17:57:41 +0300	[thread overview]
Message-ID: <20230816145741.1472721-7-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230816145741.1472721-1-abel.vesa@linaro.org>

From: Jagadeesh Kona <quic_jkona@quicinc.com>

This change demonstrates the use of dev_pm_genpd_set_hwmode API from
video driver to switch the video mvs0 gdsc to SW/HW modes at runtime
based on requirement.

This change adds a new boolean array member vcodec_pmdomains_hwctrl in
venus_resources structure to indicate if GDSC's have HW control support
or not. This data is used in vcodec_control_v4() to check if GDSC has
support to switch to HW control mode and then call dev_pm_genpd_set_hwmode
to switch the GDSC mode.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/media/platform/qcom/venus/core.c      |  4 ++
 drivers/media/platform/qcom/venus/core.h      |  1 +
 .../media/platform/qcom/venus/pm_helpers.c    | 47 ++++++++-----------
 3 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 054b8e74ba4f..8145062ab6f7 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -706,6 +706,7 @@ static const struct venus_resources sdm845_res_v2 = {
 	.vcodec1_clks = { "vcodec1_core", "vcodec1_bus" },
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0", "vcodec1" },
+	.vcodec_pmdomains_hwctrl = { false, true, true },
 	.vcodec_pmdomains_num = 3,
 	.opp_pmdomain = (const char *[]) { "cx", NULL },
 	.vcodec_num = 2,
@@ -755,6 +756,7 @@ static const struct venus_resources sc7180_res = {
 	.vcodec0_clks = { "vcodec0_core", "vcodec0_bus" },
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0" },
+	.vcodec_pmdomains_hwctrl = { false, true },
 	.vcodec_pmdomains_num = 2,
 	.opp_pmdomain = (const char *[]) { "cx", NULL },
 	.vcodec_num = 1,
@@ -812,6 +814,7 @@ static const struct venus_resources sm8250_res = {
 	.vcodec0_clks = { "vcodec0_core" },
 	.vcodec_clks_num = 1,
 	.vcodec_pmdomains = { "venus", "vcodec0" },
+	.vcodec_pmdomains_hwctrl = { false, true },
 	.vcodec_pmdomains_num = 2,
 	.opp_pmdomain = (const char *[]) { "mx", NULL },
 	.vcodec_num = 1,
@@ -871,6 +874,7 @@ static const struct venus_resources sc7280_res = {
 	.vcodec0_clks = {"vcodec_core", "vcodec_bus"},
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0" },
+	.vcodec_pmdomains_hwctrl = { false, true },
 	.vcodec_pmdomains_num = 2,
 	.opp_pmdomain = (const char *[]) { "cx", NULL },
 	.vcodec_num = 1,
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index 4a633261ece4..6d591ecad482 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -73,6 +73,7 @@ struct venus_resources {
 	const char * const vcodec1_clks[VIDC_VCODEC_CLKS_NUM_MAX];
 	unsigned int vcodec_clks_num;
 	const char * const vcodec_pmdomains[VIDC_PMDOMAINS_NUM_MAX];
+	bool vcodec_pmdomains_hwctrl[VIDC_PMDOMAINS_NUM_MAX];
 	unsigned int vcodec_pmdomains_num;
 	const char **opp_pmdomain;
 	unsigned int vcodec_num;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 48c9084bb4db..c53eef23c793 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -408,35 +408,28 @@ static const struct venus_pm_ops pm_ops_v3 = {
 
 static int vcodec_control_v4(struct venus_core *core, u32 coreid, bool enable)
 {
-	void __iomem *ctrl, *stat;
-	u32 val;
-	int ret;
-
-	if (IS_V6(core)) {
-		ctrl = core->wrapper_base + WRAPPER_CORE_POWER_CONTROL_V6;
-		stat = core->wrapper_base + WRAPPER_CORE_POWER_STATUS_V6;
-	} else if (coreid == VIDC_CORE_ID_1) {
-		ctrl = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_CONTROL;
-		stat = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_STATUS;
-	} else {
-		ctrl = core->wrapper_base + WRAPPER_VCODEC1_MMCC_POWER_CONTROL;
-		stat = core->wrapper_base + WRAPPER_VCODEC1_MMCC_POWER_STATUS;
-	}
-
-	if (enable) {
-		writel(0, ctrl);
-
-		ret = readl_poll_timeout(stat, val, val & BIT(1), 1, 100);
-		if (ret)
-			return ret;
-	} else {
-		writel(1, ctrl);
+	int i, ret = 0;
+	struct device *dev = core->dev;
+	const struct venus_resources *res = core->res;
 
-		ret = readl_poll_timeout(stat, val, !(val & BIT(1)), 1, 100);
-		if (ret)
-			return ret;
+	for (i = 0; i < res->vcodec_pmdomains_num; i++) {
+		if (res->vcodec_pmdomains_hwctrl[i]) {
+
+			if (!core->pmdomains[i])
+				return -ENODEV;
+
+			/*
+			 * enable( true ), switch the gdsc to SW mode
+			 * enable( false), switch the gdsc to HW mode
+			 */
+			ret = dev_pm_genpd_set_hwmode(core->pmdomains[i], !enable);
+			if (ret) {
+				dev_err(dev, "Failed to switch power-domain:%d to %s mode\n",
+					i, enable ? "SW" : "HW");
+				return ret;
+			}
+		}
 	}
-
 	return 0;
 }
 
-- 
2.34.1


  parent reply	other threads:[~2023-08-16 14:59 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-16 14:57 [PATCH v2 0/6] PM: domains: Add control for switching back and forth to HW control Abel Vesa
2023-08-16 14:57 ` [PATCH v2 1/6] PM: domains: Allow devices attached to genpd to be managed by HW Abel Vesa
2023-08-16 14:57 ` [PATCH v2 2/6] PM: domains: Add the domain HW-managed mode to the summary Abel Vesa
2023-08-16 17:54   ` Konrad Dybcio
2023-08-17  9:46   ` Ulf Hansson
2023-08-16 14:57 ` [PATCH v2 3/6] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode Abel Vesa
2023-08-16 17:55   ` Konrad Dybcio
2023-08-16 14:57 ` [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode Abel Vesa
2023-08-16 17:56   ` Konrad Dybcio
2023-08-23 10:41     ` Abel Vesa
2023-08-26 10:47       ` Konrad Dybcio
2023-08-28  6:48         ` Jagadeesh Kona
2023-08-28  7:30           ` Abel Vesa
2023-09-02 11:59             ` Konrad Dybcio
2023-09-02 12:03           ` Konrad Dybcio
2023-09-04  9:27             ` Jagadeesh Kona
2023-09-04 16:02               ` Konrad Dybcio
2023-09-07  5:55                 ` Jagadeesh Kona
2023-09-07  7:36                   ` Konrad Dybcio
2023-09-11 12:47                     ` Jagadeesh Kona
2023-08-16 14:57 ` [PATCH v2 5/6] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER instead of HW_CTRL for GDSC Abel Vesa
2023-08-16 17:57   ` Konrad Dybcio
2023-08-16 14:57 ` Abel Vesa [this message]
2023-08-16 17:58   ` [PATCH v2 6/6] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode Konrad Dybcio
2023-09-02 12:17     ` Konrad Dybcio
2023-08-22 20:15 ` [PATCH v2 0/6] PM: domains: Add control for switching back and forth to HW control Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230816145741.1472721-7-abel.vesa@linaro.org \
    --to=abel.vesa@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=len.brown@intel.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pavel@ucw.cz \
    --cc=quic_jkona@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@qti.qualcomm.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®