From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Like Xu <like.xu.linux@gmail.com>
Subject: [PATCH] KVM: VMX: Refresh available regs and IDT vectoring info before NMI handling
Date: Thu, 24 Aug 2023 18:45:32 -0700 [thread overview]
Message-ID: <20230825014532.2846714-1-seanjc@google.com> (raw)
Reset the mask of available "registers" and refresh the IDT vectoring
info snapshot in vmx_vcpu_enter_exit(), before KVM potentially handles a
an NMI VM-Exit. One of the "registers" that KVM VMX lazily loads is the
vmcs.VM_EXIT_INTR_INFO field, which is holds the vector+type on "exception
or NMI" VM-Exits, i.e. is needed to identify NMIs. Clearing the available
registers bitmask after handling NMIs results in KVM querying info from
the last VM-Exit that read vmcs.VM_EXIT_INTR_INFO, and leads to both
missed NMIs and spurious NMIs in the host.
Opportunistically grab vmcs.IDT_VECTORING_INFO_FIELD early in the VM-Exit
path too, e.g. to guard against similar consumption of stale data. The
field is read on every "normal" VM-Exit, and there's no point in delaying
the inevitable.
Reported-by: Like Xu <like.xu.linux@gmail.com>
Fixes: 11df586d774f ("KVM: VMX: Handle NMI VM-Exits in noinstr region")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
Like, this is lightly tested, any testing you can provide would be much
appreciated. I definitely want to get coverage for this in selftests
and/or KUT, but I'm very short on cycles right now.
arch/x86/kvm/vmx/vmx.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index e6849f780dba..d2b78ab7a9f2 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7222,13 +7222,20 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
flags);
vcpu->arch.cr2 = native_read_cr2();
+ vcpu->arch.regs_avail &= ~VMX_REGS_LAZY_LOAD_SET;
+
+ vmx->idt_vectoring_info = 0;
vmx_enable_fb_clear(vmx);
- if (unlikely(vmx->fail))
+ if (unlikely(vmx->fail)) {
vmx->exit_reason.full = 0xdead;
- else
- vmx->exit_reason.full = vmcs_read32(VM_EXIT_REASON);
+ goto out;
+ }
+
+ vmx->exit_reason.full = vmcs_read32(VM_EXIT_REASON);
+ if (likely(!vmx->exit_reason.failed_vmentry))
+ vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
if ((u16)vmx->exit_reason.basic == EXIT_REASON_EXCEPTION_NMI &&
is_nmi(vmx_get_intr_info(vcpu))) {
@@ -7237,6 +7244,7 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
kvm_after_interrupt(vcpu);
}
+out:
guest_state_exit_irqoff();
}
@@ -7358,8 +7366,6 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
loadsegment(es, __USER_DS);
#endif
- vcpu->arch.regs_avail &= ~VMX_REGS_LAZY_LOAD_SET;
-
pt_guest_exit(vmx);
kvm_load_host_xsave_state(vcpu);
@@ -7376,17 +7382,12 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
vmx->nested.nested_run_pending = 0;
}
- vmx->idt_vectoring_info = 0;
-
if (unlikely(vmx->fail))
return EXIT_FASTPATH_NONE;
if (unlikely((u16)vmx->exit_reason.basic == EXIT_REASON_MCE_DURING_VMENTRY))
kvm_machine_check();
- if (likely(!vmx->exit_reason.failed_vmentry))
- vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
-
trace_kvm_exit(vcpu, KVM_ISA_VMX);
if (unlikely(vmx->exit_reason.failed_vmentry))
base-commit: fff2e47e6c3b8050ca26656693caa857e3a8b740
--
2.42.0.rc2.253.gd59a3bf2b4-goog
next reply other threads:[~2023-08-25 1:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 1:45 Sean Christopherson [this message]
2023-08-29 3:11 ` Sean Christopherson
2023-08-29 17:12 ` Paolo Bonzini
2023-08-29 17:15 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230825014532.2846714-1-seanjc@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=like.xu.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®