mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
	David Rhodes <david.rhodes@cirrus.com>,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Rob Herring <robh+dt@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<RicardoRivera-Matosricardo.rivera-matos@cirrus.com>,
	Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Subject: [PATCH 4/7] ASoC: cs35l45: Analog PCM Volume and Amplifier Mode controls
Date: Mon, 28 Aug 2023 12:05:22 -0500	[thread overview]
Message-ID: <20230828170525.335671-4-vkarpovi@opensource.cirrus.com> (raw)
In-Reply-To: <20230828170525.335671-1-vkarpovi@opensource.cirrus.com>

Adds "Analog PCM Volume" control with supported values
0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB.
The amplifier can operate either in Speaker Mode or Receiver Mode
as configured by the user. Speaker Mode has four gain options
to support maximum amplifier output amplitude for loud
speaker application. Receiver Mode has further optimized
noise performance while maintaining sufficient output to support
phone receiver application. While configured in Receiver Mode,
the analog PCM Volume control is disabled and
the analog gain is fixed to 1dB.

Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
---
 sound/soc/codecs/cs35l45-tables.c |   3 +
 sound/soc/codecs/cs35l45.c        | 148 ++++++++++++++++++++++++++++++
 sound/soc/codecs/cs35l45.h        |  35 ++++++-
 3 files changed, 184 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs35l45-tables.c b/sound/soc/codecs/cs35l45-tables.c
index e20c1bc9a687..2e77644f3b0b 100644
--- a/sound/soc/codecs/cs35l45-tables.c
+++ b/sound/soc/codecs/cs35l45-tables.c
@@ -91,6 +91,7 @@ static const struct reg_default cs35l45_defaults[] = {
 	{ CS35L45_DSP1RX7_INPUT,		0x0000003A },
 	{ CS35L45_DSP1RX8_INPUT,		0x00000028 },
 	{ CS35L45_AMP_PCM_CONTROL,		0x00100000 },
+	{ CS35L45_AMP_GAIN,			0x00002300 },
 	{ CS35L45_IRQ1_CFG,			0x00000000 },
 	{ CS35L45_IRQ1_MASK_1,			0xBFEFFFBF },
 	{ CS35L45_IRQ1_MASK_2,			0xFFFFFFFF },
@@ -156,7 +157,9 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg)
 	case CS35L45_DSP1RX6_INPUT:
 	case CS35L45_DSP1RX7_INPUT:
 	case CS35L45_DSP1RX8_INPUT:
+	case CS35L45_HVLV_CONFIG:
 	case CS35L45_AMP_PCM_CONTROL:
+	case CS35L45_AMP_GAIN:
 	case CS35L45_AMP_PCM_HPF_TST:
 	case CS35L45_IRQ1_CFG:
 	case CS35L45_IRQ1_STATUS:
diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c
index 2c9b41171a05..32ecc2ebaf9d 100644
--- a/sound/soc/codecs/cs35l45.c
+++ b/sound/soc/codecs/cs35l45.c
@@ -169,6 +169,142 @@ static int cs35l45_dsp_audio_ev(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int cs35l45_activate_ctl(struct snd_soc_component *component,
+				const char *ctl_name, bool active)
+{
+	struct snd_card *card = component->card->snd_card;
+	struct snd_kcontrol *kcontrol;
+	struct snd_kcontrol_volatile *vd;
+	unsigned int index_offset;
+	char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+
+	if (component->name_prefix)
+		snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %s",
+			 component->name_prefix, ctl_name);
+	else
+		snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s", ctl_name);
+
+	kcontrol = snd_soc_card_get_kcontrol(component->card, name);
+	if (!kcontrol) {
+		dev_err(component->dev, "Can't find kcontrol %s\n", name);
+		return -EINVAL;
+	}
+
+	index_offset = snd_ctl_get_ioff(kcontrol, &kcontrol->id);
+	vd = &kcontrol->vd[index_offset];
+	if (active)
+		vd->access |= SNDRV_CTL_ELEM_ACCESS_WRITE;
+	else
+		vd->access &= ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+
+	snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, &kcontrol->id);
+
+	return 0;
+}
+
+static int cs35l45_amplifier_mode_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+			snd_soc_kcontrol_component(kcontrol);
+	struct cs35l45_private *cs35l45 =
+			snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = cs35l45->amplifier_mode;
+
+	return 0;
+}
+
+static int cs35l45_amplifier_mode_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+			snd_soc_kcontrol_component(kcontrol);
+	struct cs35l45_private *cs35l45 =
+			snd_soc_component_get_drvdata(component);
+	struct snd_soc_dapm_context *dapm =
+			snd_soc_component_get_dapm(component);
+	unsigned int amp_state;
+	int ret;
+
+	if ((ucontrol->value.integer.value[0] == cs35l45->amplifier_mode) ||
+	    (ucontrol->value.integer.value[0] > AMP_MODE_RCV))
+		return 0;
+
+	snd_soc_dapm_mutex_lock(dapm);
+
+	ret = regmap_read(cs35l45->regmap, CS35L45_BLOCK_ENABLES, &amp_state);
+	if (ret < 0) {
+		dev_err(cs35l45->dev, "Failed to read AMP state: %d\n", ret);
+		snd_soc_dapm_mutex_unlock(dapm);
+		return ret;
+	}
+
+	regmap_clear_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				  CS35L45_AMP_EN_MASK);
+	snd_soc_component_disable_pin_unlocked(component, "SPK");
+	snd_soc_dapm_sync_unlocked(dapm);
+
+	if (ucontrol->value.integer.value[0] == AMP_MODE_SPK) {
+		regmap_clear_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				  CS35L45_RCV_EN_MASK);
+
+		regmap_update_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				   CS35L45_BST_EN_MASK,
+				   CS35L45_BST_ENABLE << CS35L45_BST_EN_SHIFT);
+
+		regmap_update_bits(cs35l45->regmap, CS35L45_HVLV_CONFIG,
+				   CS35L45_HVLV_MODE_MASK,
+				   CS35L45_HVLV_OPERATION <<
+				   CS35L45_HVLV_MODE_SHIFT);
+
+		ret = cs35l45_activate_ctl(component, "Analog PCM Volume", true);
+		if (ret < 0)
+			dev_err(cs35l45->dev,
+				"Unable to deactivate ctl (%d)\n", ret);
+
+	} else  /* AMP_MODE_RCV */ {
+		regmap_set_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				CS35L45_RCV_EN_MASK);
+
+		regmap_update_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				   CS35L45_BST_EN_MASK,
+				   CS35L45_BST_DISABLE_FET_OFF <<
+				   CS35L45_BST_EN_SHIFT);
+
+		regmap_update_bits(cs35l45->regmap, CS35L45_HVLV_CONFIG,
+				   CS35L45_HVLV_MODE_MASK,
+				   CS35L45_FORCE_LV_OPERATION <<
+				   CS35L45_HVLV_MODE_SHIFT);
+
+		regmap_clear_bits(cs35l45->regmap,
+				  CS35L45_BLOCK_ENABLES2,
+				  CS35L45_AMP_DRE_EN_MASK);
+
+		regmap_update_bits(cs35l45->regmap, CS35L45_AMP_GAIN,
+				   CS35L45_AMP_GAIN_PCM_MASK,
+				   CS35L45_AMP_GAIN_PCM_13DBV <<
+				   CS35L45_AMP_GAIN_PCM_SHIFT);
+
+		ret = cs35l45_activate_ctl(component, "Analog PCM Volume", false);
+		if (ret < 0)
+			dev_err(cs35l45->dev,
+				"Unable to deactivate ctl (%d)\n", ret);
+	}
+
+	if (amp_state & CS35L45_AMP_EN_MASK)
+		regmap_set_bits(cs35l45->regmap, CS35L45_BLOCK_ENABLES,
+				CS35L45_AMP_EN_MASK);
+
+	snd_soc_component_enable_pin_unlocked(component, "SPK");
+	snd_soc_dapm_sync_unlocked(dapm);
+	snd_soc_dapm_mutex_unlock(dapm);
+
+	cs35l45->amplifier_mode = ucontrol->value.integer.value[0];
+
+	return 0;
+}
+
 static const char * const cs35l45_asp_tx_txt[] = {
 	"Zero", "ASP_RX1", "ASP_RX2",
 	"VMON", "IMON", "ERR_VOL",
@@ -432,9 +568,19 @@ static const struct snd_soc_dapm_route cs35l45_dapm_routes[] = {
 	{ "SPK", NULL, "AMP"},
 };
 
+static const char * const amplifier_mode_texts[] = {"SPK", "RCV"};
+static SOC_ENUM_SINGLE_DECL(amplifier_mode_enum, SND_SOC_NOPM, 0,
+			    amplifier_mode_texts);
+static DECLARE_TLV_DB_SCALE(amp_gain_tlv, 1000, 300, 0);
 static const DECLARE_TLV_DB_SCALE(cs35l45_dig_pcm_vol_tlv, -10225, 25, true);
 
 static const struct snd_kcontrol_new cs35l45_controls[] = {
+	SOC_ENUM_EXT("Amplifier Mode", amplifier_mode_enum,
+		     cs35l45_amplifier_mode_get, cs35l45_amplifier_mode_put),
+	SOC_SINGLE_TLV("Analog PCM Volume", CS35L45_AMP_GAIN,
+			CS35L45_AMP_GAIN_PCM_SHIFT,
+			CS35L45_AMP_GAIN_PCM_MASK >> CS35L45_AMP_GAIN_PCM_SHIFT,
+			0, amp_gain_tlv),
 	/* Ignore bit 0: it is beyond the resolution of TLV_DB_SCALE */
 	SOC_SINGLE_S_TLV("Digital PCM Volume",
 			 CS35L45_AMP_PCM_CONTROL,
@@ -1104,6 +1250,8 @@ static int cs35l45_initialize(struct cs35l45_private *cs35l45)
 	if (ret < 0)
 		return ret;
 
+	cs35l45->amplifier_mode = AMP_MODE_SPK;
+
 	return 0;
 }
 
diff --git a/sound/soc/codecs/cs35l45.h b/sound/soc/codecs/cs35l45.h
index 61135a316df3..16857321d945 100644
--- a/sound/soc/codecs/cs35l45.h
+++ b/sound/soc/codecs/cs35l45.h
@@ -61,9 +61,11 @@
 #define CS35L45_DSP1RX6_INPUT			0x00004C54
 #define CS35L45_DSP1RX7_INPUT			0x00004C58
 #define CS35L45_DSP1RX8_INPUT			0x00004C5C
+#define CS35L45_HVLV_CONFIG			0x00006400
 #define CS35L45_LDPM_CONFIG			0x00006404
 #define CS35L45_AMP_PCM_CONTROL			0x00007000
 #define CS35L45_AMP_PCM_HPF_TST			0x00007004
+#define CS35L45_AMP_GAIN			0x00007800
 #define CS35L45_IRQ1_CFG			0x0000E000
 #define CS35L45_IRQ1_STATUS			0x0000E004
 #define CS35L45_IRQ1_EINT_1			0x0000E010
@@ -167,12 +169,19 @@
 #define CS35L45_VDD_BATTMON_EN_SHIFT		8
 #define CS35L45_BST_EN_SHIFT			4
 #define CS35L45_BST_EN_MASK			GENMASK(5, 4)
+#define CS35L45_RCV_EN_SHIFT			2
+#define CS35L45_RCV_EN_MASK			BIT(2)
+#define CS35L45_AMP_EN_SHIFT			0
+#define CS35L45_AMP_EN_MASK			BIT(0)
 
-#define CS35L45_BST_DISABLE_FET_ON              0x01
+#define CS35L45_BST_DISABLE_FET_OFF		0x00
+#define CS35L45_BST_DISABLE_FET_ON		0x01
+#define CS35L45_BST_ENABLE			0x02
 
 /* BLOCK_ENABLES2 */
 #define CS35L45_ASP_EN_SHIFT			27
-
+#define CS35L45_AMP_DRE_EN_SHIFT		20
+#define CS35L45_AMP_DRE_EN_MASK		BIT(20)
 #define CS35L45_MEM_RDY_SHIFT			1
 #define CS35L45_MEM_RDY_MASK			BIT(1)
 
@@ -266,6 +275,13 @@
 #define CS35L45_ASP_WL_SHIFT			0
 #define CS35L45_ASP_WL_MASK			GENMASK(5, 0)
 
+/* HVLV_CONFIG */
+#define CS35L45_FORCE_LV_OPERATION		0x01
+#define CS35L45_FORCE_HV_OPERATION		0x02
+#define CS35L45_HVLV_OPERATION			0x03
+#define CS35L45_HVLV_MODE_SHIFT		0
+#define CS35L45_HVLV_MODE_MASK			GENMASK(1, 0)
+
 /* AMP_PCM_CONTROL */
 #define CS35L45_AMP_VOL_PCM_SHIFT		0
 #define CS35L45_AMP_VOL_PCM_WIDTH		11
@@ -275,6 +291,15 @@
 #define CS35L45_HPF_44P1			0x000108BD
 #define CS35L45_HPF_88P2			0x0001045F
 
+/* AMP_GAIN_PCM */
+#define CS35L45_AMP_GAIN_PCM_10DBV		0x00
+#define CS35L45_AMP_GAIN_PCM_13DBV		0x01
+#define CS35L45_AMP_GAIN_PCM_16DBV		0x02
+#define CS35L45_AMP_GAIN_PCM_19DBV		0x03
+
+#define CS35L45_AMP_GAIN_PCM_SHIFT		8
+#define CS35L45_AMP_GAIN_PCM_MASK		GENMASK(9, 8)
+
 /* IRQ1_EINT_4 */
 #define CS35L45_OTP_BOOT_DONE_STS_MASK		BIT(1)
 #define CS35L45_OTP_BUSY_MASK			BIT(0)
@@ -396,6 +421,11 @@ enum control_bus_type {
 	CONTROL_BUS_SPI = 1,
 };
 
+enum amp_mode {
+	AMP_MODE_SPK  = 0,
+	AMP_MODE_RCV  = 1,
+};
+
 #define CS35L45_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
 			 SNDRV_PCM_FMTBIT_S24_3LE| \
 			 SNDRV_PCM_FMTBIT_S24_LE)
@@ -464,6 +494,7 @@ struct cs35l45_private {
 	bool sysclk_set;
 	u8 slot_width;
 	u8 slot_count;
+	int amplifier_mode;
 	int irq_invert;
 	int irq;
 	unsigned int i2c_addr;
-- 
2.25.1


  parent reply	other threads:[~2023-08-28 17:07 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-28 17:05 [PATCH 1/7] ASoC: cs35l45: Add support for Chip ID 0x35A460 Vlad Karpovich
2023-08-28 17:05 ` [PATCH 2/7] ASoC: cs35l45: Fix "Dead assigment" warning Vlad Karpovich
2023-08-29 10:04   ` Charles Keepax
2023-08-28 17:05 ` [PATCH 3/7] ASoC: cs35l45: Checks index of cs35l45_irqs[] Vlad Karpovich
2023-08-29 10:07   ` Charles Keepax
2023-08-29 18:17     ` Vlad Karpovich
2023-08-28 17:05 ` Vlad Karpovich [this message]
2023-08-28 19:39   ` [PATCH 4/7] ASoC: cs35l45: Analog PCM Volume and Amplifier Mode controls Mark Brown
2023-08-30 15:55     ` Vlad Karpovich
2023-08-28 17:05 ` [PATCH 5/7] ASoC: cs35l45: Rename DACPCM1 Source control Vlad Karpovich
2023-08-29 10:08   ` Charles Keepax
2023-08-28 17:05 ` [PATCH 6/7] ASoC: cs35l45: Connect DSP to the monitoring signals Vlad Karpovich
2023-08-29 10:11   ` Charles Keepax
2023-08-28 17:05 ` [PATCH 7/7] ASoC: cs35l45: Add AMP Enable Switch control Vlad Karpovich
2023-08-29 10:13   ` Charles Keepax
2023-08-29 10:04 ` [PATCH 1/7] ASoC: cs35l45: Add support for Chip ID 0x35A460 Charles Keepax
2023-08-29 19:12 ` (subset) " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230828170525.335671-4-vkarpovi@opensource.cirrus.com \
    --to=vkarpovi@opensource.cirrus.com \
    --cc=RicardoRivera-Matosricardo.rivera-matos@cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=james.schulman@cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=rf@opensource.cirrus.com \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®