From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Biju Das <biju.das.au@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: Re: [PATCH v2] regulator: max20086: Make similar OF and ID table
Date: Mon, 4 Sep 2023 11:21:17 +0300 [thread overview]
Message-ID: <20230904082117.GB8907@pendragon.ideasonboard.com> (raw)
In-Reply-To: <OS0PR01MB59222C22997B3391673A69BA86E9A@OS0PR01MB5922.jpnprd01.prod.outlook.com>
Hi Biju,
On Mon, Sep 04, 2023 at 07:03:32AM +0000, Biju Das wrote:
> Subject: Re: [PATCH v2] regulator: max20086: Make similar OF and ID table
> > On Sun, Sep 03, 2023 at 04:42:57PM +0100, Biju Das wrote:
> > > Make similar OF and ID table to extend support for ID match using
> > > i2c_match_data(). Currently it works only for OF match tables as the
> > > driver_data is wrong for ID match.
> >
> > If it's currently broken for the I2C ID table, let's drop it instead of
> > fixing it. We can always add it back when this device will appear on non-OF
> > systems, if it ever does. The max20086_dt_ids table would then not need to
> > be modified to extract the max20086_chip_info instances.
>
> I am leaving this to respective maintainer to take a decision, whether
> to enhance the driver or drop broken support like DRM bridge driver
> (analogix-anx78xx?
I'm listed as the maintainer of the driver :-) I'd rather drop non-OF
support until needed as it doesn't work currently.
> > > While at it, drop blank lines before MODULE_DEVICE_TABLE* and remove
> > > trailing comma in the terminator entry for OF/ID table.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > ---
> > > Note:
> > > This patch is only compile tested.
> > >
> > > v1->v2:
> > > * Removed trailing comma in the terminator entry for OF/ID table.
> > > ---
> > > drivers/regulator/max20086-regulator.c | 65
> > > ++++++++++++--------------
> > > 1 file changed, 31 insertions(+), 34 deletions(-)
> > >
> > > diff --git a/drivers/regulator/max20086-regulator.c
> > > b/drivers/regulator/max20086-regulator.c
> > > index 32f47b896fd1..59eb23d467ec 100644
> > > --- a/drivers/regulator/max20086-regulator.c
> > > +++ b/drivers/regulator/max20086-regulator.c
> > > @@ -223,7 +223,7 @@ static int max20086_i2c_probe(struct i2c_client *i2c)
> > > return -ENOMEM;
> > >
> > > chip->dev = &i2c->dev;
> > > - chip->info = device_get_match_data(chip->dev);
> > > + chip->info = i2c_get_match_data(i2c);
> > >
> > > i2c_set_clientdata(i2c, chip);
> > >
> > > @@ -275,45 +275,42 @@ static int max20086_i2c_probe(struct i2c_client
> > *i2c)
> > > return 0;
> > > }
> > >
> > > -static const struct i2c_device_id max20086_i2c_id[] = {
> > > - { "max20086" },
> > > - { "max20087" },
> > > - { "max20088" },
> > > - { "max20089" },
> > > - { /* Sentinel */ },
> > > +static const struct max20086_chip_info max20086_chip_info = {
> > > + .id = MAX20086_DEVICE_ID_MAX20086,
> > > + .num_outputs = 4,
> > > +};
> > > +
> > > +static const struct max20086_chip_info max20087_chip_info = {
> > > + .id = MAX20086_DEVICE_ID_MAX20087,
> > > + .num_outputs = 4,
> > > +};
> > > +
> > > +static const struct max20086_chip_info max20088_chip_info = {
> > > + .id = MAX20086_DEVICE_ID_MAX20088,
> > > + .num_outputs = 2,
> > > +};
> > > +
> > > +static const struct max20086_chip_info max20089_chip_info = {
> > > + .id = MAX20086_DEVICE_ID_MAX20089,
> > > + .num_outputs = 2,
> > > };
> > >
> > > +static const struct i2c_device_id max20086_i2c_id[] = {
> > > + { "max20086", (kernel_ulong_t)&max20086_chip_info },
> > > + { "max20087", (kernel_ulong_t)&max20087_chip_info },
> > > + { "max20088", (kernel_ulong_t)&max20088_chip_info },
> > > + { "max20089", (kernel_ulong_t)&max20089_chip_info },
> > > + { /* Sentinel */ }
> > > +};
> > > MODULE_DEVICE_TABLE(i2c, max20086_i2c_id);
> > >
> > > static const struct of_device_id max20086_dt_ids[] __maybe_unused = {
> > > - {
> > > - .compatible = "maxim,max20086",
> > > - .data = &(const struct max20086_chip_info) {
> > > - .id = MAX20086_DEVICE_ID_MAX20086,
> > > - .num_outputs = 4,
> > > - }
> > > - }, {
> > > - .compatible = "maxim,max20087",
> > > - .data = &(const struct max20086_chip_info) {
> > > - .id = MAX20086_DEVICE_ID_MAX20087,
> > > - .num_outputs = 4,
> > > - }
> > > - }, {
> > > - .compatible = "maxim,max20088",
> > > - .data = &(const struct max20086_chip_info) {
> > > - .id = MAX20086_DEVICE_ID_MAX20088,
> > > - .num_outputs = 2,
> > > - }
> > > - }, {
> > > - .compatible = "maxim,max20089",
> > > - .data = &(const struct max20086_chip_info) {
> > > - .id = MAX20086_DEVICE_ID_MAX20089,
> > > - .num_outputs = 2,
> > > - }
> > > - },
> > > - { /* Sentinel */ },
> > > + { .compatible = "maxim,max20086", .data = &max20086_chip_info },
> > > + { .compatible = "maxim,max20087", .data = &max20087_chip_info },
> > > + { .compatible = "maxim,max20088", .data = &max20088_chip_info },
> > > + { .compatible = "maxim,max20089", .data = &max20089_chip_info },
> > > + { /* Sentinel */ }
> > > };
> > > -
> > > MODULE_DEVICE_TABLE(of, max20086_dt_ids);
> > >
> > > static struct i2c_driver max20086_regulator_driver = {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-09-04 8:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-03 15:42 Biju Das
2023-09-03 20:37 ` Laurent Pinchart
2023-09-04 7:03 ` Biju Das
2023-09-04 8:21 ` Laurent Pinchart [this message]
2023-09-11 23:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230904082117.GB8907@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=biju.das.au@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®