From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Catherine Sullivan <catherine.sullivan@intel.com>,
Greg Rose <gregory.v.rose@intel.com>,
intel-wired-lan@lists.osuosl.org (moderated list:INTEL ETHERNET
DRIVERS), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net] i40e: Fix VF VLAN offloading when port VLAN is configured
Date: Thu, 7 Sep 2023 17:44:57 +0200 [thread overview]
Message-ID: <20230907154457.3861711-1-ivecera@redhat.com> (raw)
If port VLAN is configured on a VF then any other VLANs on top of this VF
are broken.
During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
but this reset occurs too early, prior setting of vf->info.pvid field
and because this field can be zero during i40e_vc_get_vf_resources_msg()
then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
This is wrong because iavf driver should not report VLAN offloading
capability when port VLAN is configured as i40e does not support QinQ
offloading.
Fix the issue by moving VF reset after setting of vf->port_vlan_id
field.
Without this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: on
tx-vlan-offload: on
$ dmesg -l err | grep iavf
[1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
With this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: off [requested on]
tx-vlan-offload: off [requested on]
$ dmesg -l err | grep iavf
Fixes: f9b4b6278d51ff ("i40e: Reset the VF upon conflicting VLAN configuration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 8ea1a238dcefe1..d3d6415553ed67 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4475,9 +4475,7 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
goto error_pvid;
i40e_vlan_stripping_enable(vsi);
- i40e_vc_reset_vf(vf, true);
- /* During reset the VF got a new VSI, so refresh a pointer. */
- vsi = pf->vsi[vf->lan_vsi_idx];
+
/* Locked once because multiple functions below iterate list */
spin_lock_bh(&vsi->mac_filter_hash_lock);
@@ -4563,6 +4561,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
*/
vf->port_vlan_id = le16_to_cpu(vsi->info.pvid);
+ i40e_vc_reset_vf(vf, true);
+ /* During reset the VF got a new VSI, so refresh a pointer. */
+ vsi = pf->vsi[vf->lan_vsi_idx];
+
ret = i40e_config_vf_promiscuous_mode(vf, vsi->id, allmulti, alluni);
if (ret) {
dev_err(&pf->pdev->dev, "Unable to config vf promiscuous mode\n");
--
2.41.0
next reply other threads:[~2023-09-07 16:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-07 15:44 Ivan Vecera [this message]
2023-09-07 18:52 ` Jesse Brandeburg
2023-09-15 8:42 ` [Intel-wired-lan] " Romanowski, Rafal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230907154457.3861711-1-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=anthony.l.nguyen@intel.com \
--cc=catherine.sullivan@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gregory.v.rose@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®