From: Melissa Wen <mwen@igalia.com>
To: Harry Wentland <harry.wentland@amd.com>
Cc: amd-gfx@lists.freedesktop.org,
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>,
sunpeng.li@amd.com, Alex Deucher <alexander.deucher@amd.com>,
dri-devel@lists.freedesktop.org, christian.koenig@amd.com,
Xinhui.Pan@amd.com, airlied@gmail.com, daniel@ffwll.ch,
Joshua Ashton <joshua@froggi.es>,
Sebastian Wick <sebastian.wick@redhat.com>,
Xaver Hugl <xaver.hugl@gmail.com>,
Shashank Sharma <Shashank.Sharma@amd.com>,
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>,
sungjoon.kim@amd.com, Alex Hung <alex.hung@amd.com>,
Pekka Paalanen <pekka.paalanen@collabora.com>,
Simon Ser <contact@emersion.fr>,
kernel-dev@igalia.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 11/34] drm/amd/display: add plane shaper LUT and TF driver-specific properties
Date: Fri, 8 Sep 2023 13:21:07 -0100 [thread overview]
Message-ID: <20230908142107.ihlfqp7kybbjddiq@mail.igalia.com> (raw)
In-Reply-To: <26a6d3ed-472a-4c70-a6ce-29f3ea7c81f5@amd.com>
On 09/06, Harry Wentland wrote:
> On 2023-08-10 12:02, Melissa Wen wrote:
> > On AMD HW, 3D LUT always assumes a preceding shaper 1D LUT used for
> > delinearizing and/or normalizing the color space before applying a 3D
> > LUT. Add pre-defined transfer function to enable delinearizing content
> > with or without shaper LUT, where AMD color module calculates the
> > resulted shaper curve. We apply an inverse EOTF to go from linear values
> > to encoded values. If we are already in a non-linear space and/or don't
> > need to normalize values, we can bypass shaper LUT with a linear
> > transfer function that is also the default TF value.
> >
>
> I think the color module will combine the TF and the custom 1D LUT
> into the LUT that's actually programmed. We should spell out this
> behavior in the comments below and in the patch description as it's
> important for a userspace application to know.
>
> The same applies to all other TF+LUT blocks.
yeah, you're right, I'll describe it better.
Thanks,
Melissa
>
> Harry
>
> > v2:
> > - squash commits for shaper LUT and shaper TF
> > - define inverse EOTF as supported shaper TFs
> >
> > Signed-off-by: Melissa Wen <mwen@igalia.com>
> > ---
> > drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 16 ++++++++++
> > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 11 +++++++
> > .../amd/display/amdgpu_dm/amdgpu_dm_color.c | 29 +++++++++++++++++
> > .../amd/display/amdgpu_dm/amdgpu_dm_plane.c | 32 +++++++++++++++++++
> > 4 files changed, 88 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> > index 730a88236501..4fb164204ee6 100644
> > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> > @@ -363,6 +363,22 @@ struct amdgpu_mode_info {
> > * @plane_hdr_mult_property:
> > */
> > struct drm_property *plane_hdr_mult_property;
> > + /**
> > + * @shaper_lut_property: Plane property to set pre-blending shaper LUT
> > + * that converts color content before 3D LUT.
> > + */
> > + struct drm_property *plane_shaper_lut_property;
> > + /**
> > + * @shaper_lut_size_property: Plane property for the size of
> > + * pre-blending shaper LUT as supported by the driver (read-only).
> > + */
> > + struct drm_property *plane_shaper_lut_size_property;
> > + /**
> > + * @plane_shaper_tf_property: Plane property to set a predefined
> > + * transfer function for pre-blending shaper (before applying 3D LUT)
> > + * with or without LUT.
> > + */
> > + struct drm_property *plane_shaper_tf_property;
> > /**
> > * @plane_lut3d_property: Plane property for gamma correction using a
> > * 3D LUT (pre-blending).
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
> > index deea90212e31..6b6c2980f0af 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
> > @@ -769,6 +769,17 @@ struct dm_plane_state {
> > * S31.32 sign-magnitude.
> > */
> > __u64 hdr_mult;
> > + /**
> > + * @shaper_lut: shaper lookup table blob. The blob (if not NULL) is an
> > + * array of &struct drm_color_lut.
> > + */
> > + struct drm_property_blob *shaper_lut;
> > + /**
> > + * @shaper_tf:
> > + *
> > + * Predefined transfer function to delinearize color space.
> > + */
> > + enum amdgpu_transfer_function shaper_tf;
> > /**
> > * @lut3d: 3D lookup table blob. The blob (if not NULL) is an array of
> > * &struct drm_color_lut.
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> > index 7e6d4df99a0c..fbcee717bf0a 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> > @@ -151,6 +151,14 @@ static const u32 amdgpu_eotf =
> > BIT(AMDGPU_TRANSFER_FUNCTION_GAMMA24_EOTF) |
> > BIT(AMDGPU_TRANSFER_FUNCTION_GAMMA26_EOTF);
> >
> > +static const u32 amdgpu_inv_eotf =
> > + BIT(AMDGPU_TRANSFER_FUNCTION_SRGB_INV_EOTF) |
> > + BIT(AMDGPU_TRANSFER_FUNCTION_BT709_INV_EOTF) |
> > + BIT(AMDGPU_TRANSFER_FUNCTION_PQ_INV_EOTF) |
> > + BIT(AMDGPU_TRANSFER_FUNCTION_GAMMA22_INV_EOTF) |
> > + BIT(AMDGPU_TRANSFER_FUNCTION_GAMMA24_INV_EOTF) |
> > + BIT(AMDGPU_TRANSFER_FUNCTION_GAMMA26_INV_EOTF);
> > +
> > static struct drm_property *
> > amdgpu_create_tf_property(struct drm_device *dev,
> > const char *name,
> > @@ -209,6 +217,27 @@ amdgpu_dm_create_color_properties(struct amdgpu_device *adev)
> > return -ENOMEM;
> > adev->mode_info.plane_hdr_mult_property = prop;
> >
> > + prop = drm_property_create(adev_to_drm(adev),
> > + DRM_MODE_PROP_BLOB,
> > + "AMD_PLANE_SHAPER_LUT", 0);
> > + if (!prop)
> > + return -ENOMEM;
> > + adev->mode_info.plane_shaper_lut_property = prop;
> > +
> > + prop = drm_property_create_range(adev_to_drm(adev),
> > + DRM_MODE_PROP_IMMUTABLE,
> > + "AMD_PLANE_SHAPER_LUT_SIZE", 0, UINT_MAX);
> > + if (!prop)
> > + return -ENOMEM;
> > + adev->mode_info.plane_shaper_lut_size_property = prop;
> > +
> > + prop = amdgpu_create_tf_property(adev_to_drm(adev),
> > + "AMD_PLANE_SHAPER_TF",
> > + amdgpu_inv_eotf);
> > + if (!prop)
> > + return -ENOMEM;
> > + adev->mode_info.plane_shaper_tf_property = prop;
> > +
> > prop = drm_property_create(adev_to_drm(adev),
> > DRM_MODE_PROP_BLOB,
> > "AMD_PLANE_LUT3D", 0);
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
> > index 882391f7add6..8d6ddf19bb87 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
> > @@ -1332,6 +1332,7 @@ static void dm_drm_plane_reset(struct drm_plane *plane)
> > __drm_atomic_helper_plane_reset(plane, &amdgpu_state->base);
> > amdgpu_state->degamma_tf = AMDGPU_TRANSFER_FUNCTION_DEFAULT;
> > amdgpu_state->hdr_mult = AMDGPU_HDR_MULT_DEFAULT;
> > + amdgpu_state->shaper_tf = AMDGPU_TRANSFER_FUNCTION_DEFAULT;
> > }
> >
> > static struct drm_plane_state *
> > @@ -1353,11 +1354,14 @@ dm_drm_plane_duplicate_state(struct drm_plane *plane)
> >
> > if (dm_plane_state->degamma_lut)
> > drm_property_blob_get(dm_plane_state->degamma_lut);
> > + if (dm_plane_state->shaper_lut)
> > + drm_property_blob_get(dm_plane_state->shaper_lut);
> > if (dm_plane_state->lut3d)
> > drm_property_blob_get(dm_plane_state->lut3d);
> >
> > dm_plane_state->degamma_tf = old_dm_plane_state->degamma_tf;
> > dm_plane_state->hdr_mult = old_dm_plane_state->hdr_mult;
> > + dm_plane_state->shaper_tf = old_dm_plane_state->shaper_tf;
> >
> > return &dm_plane_state->base;
> > }
> > @@ -1430,6 +1434,8 @@ static void dm_drm_plane_destroy_state(struct drm_plane *plane,
> > drm_property_blob_put(dm_plane_state->degamma_lut);
> > if (dm_plane_state->lut3d)
> > drm_property_blob_put(dm_plane_state->lut3d);
> > + if (dm_plane_state->shaper_lut)
> > + drm_property_blob_put(dm_plane_state->shaper_lut);
> >
> > if (dm_plane_state->dc_state)
> > dc_plane_state_release(dm_plane_state->dc_state);
> > @@ -1462,6 +1468,14 @@ dm_atomic_plane_attach_color_mgmt_properties(struct amdgpu_display_manager *dm,
> > AMDGPU_HDR_MULT_DEFAULT);
> >
> > if (dpp_color_caps.hw_3d_lut) {
> > + drm_object_attach_property(&plane->base,
> > + mode_info.plane_shaper_lut_property, 0);
> > + drm_object_attach_property(&plane->base,
> > + mode_info.plane_shaper_lut_size_property,
> > + MAX_COLOR_LUT_ENTRIES);
> > + drm_object_attach_property(&plane->base,
> > + mode_info.plane_shaper_tf_property,
> > + AMDGPU_TRANSFER_FUNCTION_DEFAULT);
> > drm_object_attach_property(&plane->base,
> > mode_info.plane_lut3d_property, 0);
> > drm_object_attach_property(&plane->base,
> > @@ -1499,6 +1513,19 @@ dm_atomic_plane_set_property(struct drm_plane *plane,
> > dm_plane_state->hdr_mult = val;
> > dm_plane_state->base.color_mgmt_changed = 1;
> > }
> > + } else if (property == adev->mode_info.plane_shaper_lut_property) {
> > + ret = drm_property_replace_blob_from_id(plane->dev,
> > + &dm_plane_state->shaper_lut,
> > + val, -1,
> > + sizeof(struct drm_color_lut),
> > + &replaced);
> > + dm_plane_state->base.color_mgmt_changed |= replaced;
> > + return ret;
> > + } else if (property == adev->mode_info.plane_shaper_tf_property) {
> > + if (dm_plane_state->shaper_tf != val) {
> > + dm_plane_state->shaper_tf = val;
> > + dm_plane_state->base.color_mgmt_changed = 1;
> > + }
> > } else if (property == adev->mode_info.plane_lut3d_property) {
> > ret = drm_property_replace_blob_from_id(plane->dev,
> > &dm_plane_state->lut3d,
> > @@ -1534,6 +1561,11 @@ dm_atomic_plane_get_property(struct drm_plane *plane,
> > *val = dm_plane_state->degamma_tf;
> > } else if (property == adev->mode_info.plane_hdr_mult_property) {
> > *val = dm_plane_state->hdr_mult;
> > + } else if (property == adev->mode_info.plane_shaper_lut_property) {
> > + *val = (dm_plane_state->shaper_lut) ?
> > + dm_plane_state->shaper_lut->base.id : 0;
> > + } else if (property == adev->mode_info.plane_shaper_tf_property) {
> > + *val = dm_plane_state->shaper_tf;
> > } else if (property == adev->mode_info.plane_lut3d_property) {
> > *val = (dm_plane_state->lut3d) ?
> > dm_plane_state->lut3d->base.id : 0;
>
next prev parent reply other threads:[~2023-09-08 14:21 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 16:02 [PATCH v2 00/34] drm/amd/display: add AMD driver-specific properties for color mgmt Melissa Wen
2023-08-10 16:02 ` [PATCH v2 01/34] drm/amd/display: fix segment distribution for linear LUTs Melissa Wen
2023-09-06 19:15 ` Harry Wentland
2023-09-08 14:11 ` Melissa Wen
2023-09-08 14:40 ` Harry Wentland
2023-08-10 16:02 ` [PATCH v2 02/34] drm/drm_mode_object: increase max objects to accommodate new color props Melissa Wen
2023-08-10 16:02 ` [PATCH v2 03/34] drm/drm_property: make replace_property_blob_from_id a DRM helper Melissa Wen
2023-08-10 16:02 ` [PATCH v2 04/34] drm/drm_plane: track color mgmt changes per plane Melissa Wen
2023-08-10 16:02 ` [PATCH v2 05/34] drm/amd/display: add driver-specific property for plane degamma LUT Melissa Wen
2023-08-10 16:02 ` [PATCH v2 06/34] drm/amd/display: add plane degamma TF driver-specific property Melissa Wen
2023-08-10 16:02 ` [PATCH v2 07/34] drm/amd/display: explicitly define EOTF and inverse EOTF Melissa Wen
2023-08-22 11:02 ` Pekka Paalanen
2023-08-25 14:18 ` Melissa Wen
2023-09-06 20:15 ` Harry Wentland
2023-09-07 7:49 ` Pekka Paalanen
2023-09-07 14:10 ` Harry Wentland
2023-09-08 7:45 ` Pekka Paalanen
2023-09-08 14:14 ` Melissa Wen
2023-08-10 16:02 ` [PATCH v2 08/34] drm/amd/display: document AMDGPU pre-defined transfer functions Melissa Wen
2023-08-22 11:45 ` Pekka Paalanen
2023-08-10 16:02 ` [PATCH v2 09/34] drm/amd/display: add plane HDR multiplier driver-specific property Melissa Wen
2023-08-22 11:54 ` Pekka Paalanen
2023-08-10 16:02 ` [PATCH v2 10/34] drm/amd/display: add plane 3D LUT driver-specific properties Melissa Wen
2023-09-06 19:30 ` Harry Wentland
2023-09-07 7:57 ` Pekka Paalanen
2023-09-08 14:19 ` Melissa Wen
2023-08-10 16:02 ` [PATCH v2 11/34] drm/amd/display: add plane shaper LUT and TF " Melissa Wen
2023-09-06 19:33 ` Harry Wentland
2023-09-08 14:21 ` Melissa Wen [this message]
2023-08-10 16:02 ` [PATCH v2 12/34] drm/amd/display: add plane blend " Melissa Wen
2023-08-10 16:02 ` [PATCH v2 13/34] drm/amd/display: add CRTC gamma TF driver-specific property Melissa Wen
2023-08-10 16:02 ` [PATCH v2 14/34] drm/amd/display: add comments to describe DM crtc color mgmt behavior Melissa Wen
2023-08-10 16:02 ` [PATCH v2 15/34] drm/amd/display: encapsulate atomic regamma operation Melissa Wen
2023-08-10 16:02 ` [PATCH v2 16/34] drm/amd/display: add CRTC gamma TF support Melissa Wen
2023-08-10 16:02 ` [PATCH v2 17/34] drm/amd/display: set sdr_ref_white_level to 80 for out_transfer_func Melissa Wen
2023-08-10 16:02 ` [PATCH v2 18/34] drm/amd/display: mark plane as needing reset if color props change Melissa Wen
2023-08-10 16:02 ` [PATCH v2 19/34] drm/amd/display: decouple steps for mapping CRTC degamma to DC plane Melissa Wen
2023-08-22 12:11 ` Pekka Paalanen
2023-08-25 14:29 ` Melissa Wen
2023-08-28 8:17 ` Pekka Paalanen
2023-08-30 10:59 ` Michel Dänzer
2023-09-06 14:46 ` Harry Wentland
[not found] ` <CAEZNXZCfvc909iFZQMdNEz=P_T=rYEYKq1Tdrt+8RNQpBSNt_g@mail.gmail.com>
2023-08-28 10:23 ` Pekka Paalanen
2023-08-28 13:56 ` Melissa Wen
2023-08-29 8:51 ` Pekka Paalanen
2023-09-06 14:52 ` Harry Wentland
2023-08-10 16:03 ` [PATCH v2 20/34] drm/amd/display: add plane degamma TF and LUT support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 21/34] drm/amd/display: reject atomic commit if setting both plane and CRTC degamma Melissa Wen
2023-08-10 16:03 ` [PATCH v2 22/34] drm/amd/display: add dc_fixpt_from_s3132 helper Melissa Wen
2023-08-10 16:03 ` [PATCH v2 23/34] drm/amd/display: add HDR multiplier support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 24/34] drm/amd/display: add plane shaper LUT support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 25/34] drm/amd/display: add plane shaper TF support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 26/34] drm/amd/display: add plane 3D LUT support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 27/34] drm/amd/display: handle empty LUTs in __set_input_tf Melissa Wen
2023-08-10 16:03 ` [PATCH v2 28/34] drm/amd/display: add plane blend LUT and TF support Melissa Wen
2023-08-10 16:03 ` [PATCH v2 29/34] drm/amd/display: allow newer DC hardware to use degamma ROM for PQ/HLG Melissa Wen
2023-09-06 18:01 ` Harry Wentland
2023-09-08 14:28 ` Melissa Wen
2023-08-10 16:03 ` [PATCH v2 30/34] drm/amd/display: copy 3D LUT settings from crtc state to stream_update Melissa Wen
2023-08-10 16:03 ` [PATCH v2 31/34] drm/amd/display: set stream gamut remap matrix to MPC for DCN301 Melissa Wen
2023-08-22 12:30 ` Pekka Paalanen
2023-08-25 14:37 ` Melissa Wen
2023-08-28 8:20 ` Pekka Paalanen
2023-09-06 18:10 ` Harry Wentland
2023-08-10 16:03 ` [PATCH v2 32/34] drm/amd/display: add plane CTM driver-specific property Melissa Wen
2023-09-06 18:14 ` Harry Wentland
2023-09-08 14:41 ` Melissa Wen
2023-09-08 14:42 ` Harry Wentland
2023-08-10 16:03 ` [PATCH v2 33/34] drm/amd/display: add plane CTM support Melissa Wen
2023-09-06 18:18 ` Harry Wentland
2023-09-08 14:49 ` Melissa Wen
2023-08-10 16:03 ` [PATCH v2 34/34] drm/amd/display: Use 3x4 CTM for plane CTM Melissa Wen
2023-09-06 18:28 ` Harry Wentland
2023-09-06 19:33 ` [PATCH v2 00/34] drm/amd/display: add AMD driver-specific properties for color mgmt Harry Wentland
2023-09-08 14:52 ` Melissa Wen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230908142107.ihlfqp7kybbjddiq@mail.igalia.com \
--to=mwen@igalia.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=Shashank.Sharma@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alex.hung@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=contact@emersion.fr \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=joshua@froggi.es \
--cc=kernel-dev@igalia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nicholas.kazlauskas@amd.com \
--cc=pekka.paalanen@collabora.com \
--cc=sebastian.wick@redhat.com \
--cc=sungjoon.kim@amd.com \
--cc=sunpeng.li@amd.com \
--cc=xaver.hugl@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®