From: tumic@gpxsee.org
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Hans Verkuil" <hverkuil-cisco@xs4all.nl>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
"Martin Tůma" <martin.tuma@digiteqautomotive.com>
Subject: [RESEND PATCH v9 0/2] Digiteq Automotive MGB4 driver
Date: Tue, 12 Sep 2023 14:07:43 +0200 [thread overview]
Message-ID: <20230912120745.902-1-tumic@gpxsee.org> (raw)
From: Martin Tůma <martin.tuma@digiteqautomotive.com>
Hi,
This patch adds a driver for the Digiteq Automotive MGB4 grabber card.
MGB4 is a modular frame grabber PCIe card for automotive video interfaces
(FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
which already have drivers in linux are used in the design.
The driver is a quite standard v4l2 driver, with one exception - there are
a lot of sysfs options that may/must be set before opening the v4l2 device
to adapt the card on a specific signal (see mgb4.rst for details)
as the card must be able to work with various signal sources (or displays)
that can not be auto-detected.
Changes in v9:
* Renamed all sysfs show/store functions using the propper naming convention.
* Now using device_add_groups() when initializing the sysfs properties.
* Fixed build without debugfs support.
* Fixed documentation (vsync/hsync) + added default values where applicable.
* Fixed the rest of minor issues from v8 review.
Changes in v8:
* Fixed broken video buffer size computation.
* Fixed switched I2C deserializers addresses.
* Do not depend on hwmon.
Changes in v7:
* Now using hwmon for FPGA temperature reporting.
* Now using VIDIOC_S_FMT and v4l2_pix_format.bytesperline for setting
the alignment.
* Removed the magic sleep when loading the i2c/spi adapter modules (solved by
request_module() calls with propper - "platform:" prefixed - module
names).
* Now properly reporting all the timings info in the VIDIOC_G_DV_TIMINGS
ioctls.
* Updated the documentation.
* Minor fixes as discussed in the v6 review.
* Added debugfs access to the FPGA registers.
Changes in v6:
* Rebased to current master that includes the Xilinx XDMA driver.
Changes in v5:
* Removed unused <linux/version.h> includes
Changes in v4:
* Redesigned the signal change handling logic. Now using the propper timings
API in the video input driver and a propper open() syscall check/logic in
the video output driver.
* Fixed all minor issues from v3 review.
* 'checkpatch.pl --strict' used for checking the code.
Changes in v3:
* Rebased the DMA transfers part to use the new XDMA driver from Xilinx/AMD
Changes in v2:
* Completely rewritten the original Xilinx's XDMA driver to meet kernel code
standards.
* Added all required "to" and "cc" mail addresses.
===== v4l2-compliance results - input =====
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
Compliance test for mgb4 device /dev/video0:
Driver Info:
Driver name : mgb4
Card type : MGB4 PCIe Card
Bus info : PCI:0000:01:00.0
Driver version : 6.4.0
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
warn: v4l2-test-controls.cpp(1139): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for mgb4 device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 1
===== v4l2-compliance results - output =====
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
Compliance test for mgb4 device /dev/video2:
Driver Info:
Driver name : mgb4
Card type : MGB4 PCIe Card
Bus info : PCI:0000:01:00.0
Driver version : 6.4.0
Capabilities : 0x85200002
Video Output
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200002
Video Output
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 1 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Output 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Output 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Output 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Output 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for mgb4 device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
Martin Tůma (2):
Added Digiteq Automotive MGB4 driver
Added Digiteq Automotive MGB4 driver documentation
Documentation/admin-guide/media/mgb4.rst | 374 +++++++
.../admin-guide/media/pci-cardlist.rst | 1 +
.../admin-guide/media/v4l-drivers.rst | 1 +
MAINTAINERS | 7 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/mgb4/Kconfig | 17 +
drivers/media/pci/mgb4/Makefile | 6 +
drivers/media/pci/mgb4/mgb4_cmt.c | 244 +++++
drivers/media/pci/mgb4/mgb4_cmt.h | 17 +
drivers/media/pci/mgb4/mgb4_core.c | 685 +++++++++++++
drivers/media/pci/mgb4/mgb4_core.h | 72 ++
drivers/media/pci/mgb4/mgb4_dma.c | 123 +++
drivers/media/pci/mgb4/mgb4_dma.h | 18 +
drivers/media/pci/mgb4/mgb4_i2c.c | 140 +++
drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
drivers/media/pci/mgb4/mgb4_io.h | 33 +
drivers/media/pci/mgb4/mgb4_regs.c | 30 +
drivers/media/pci/mgb4/mgb4_regs.h | 35 +
drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
drivers/media/pci/mgb4/mgb4_sysfs_in.c | 753 ++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 693 +++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 71 ++
drivers/media/pci/mgb4/mgb4_trigger.c | 208 ++++
drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
drivers/media/pci/mgb4/mgb4_vin.c | 932 ++++++++++++++++++
drivers/media/pci/mgb4/mgb4_vin.h | 69 ++
drivers/media/pci/mgb4/mgb4_vout.c | 594 +++++++++++
drivers/media/pci/mgb4/mgb4_vout.h | 65 ++
29 files changed, 5251 insertions(+)
create mode 100644 Documentation/admin-guide/media/mgb4.rst
create mode 100644 drivers/media/pci/mgb4/Kconfig
create mode 100644 drivers/media/pci/mgb4/Makefile
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
base-commit: 374a7f47bf401441edff0a64465e61326bf70a82
--
2.40.1
next reply other threads:[~2023-09-12 10:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-12 12:07 tumic [this message]
2023-09-12 12:07 ` [RESEND PATCH v9 1/2] Added " tumic
2023-09-15 11:50 ` Hans Verkuil
2023-09-15 12:44 ` Martin Tůma
2023-09-12 12:07 ` [RESEND PATCH v9 2/2] Added Digiteq Automotive MGB4 driver documentation tumic
2023-09-15 9:02 ` [RESEND PATCH v9 0/2] Digiteq Automotive MGB4 driver Hans Verkuil
2023-09-15 9:07 ` Hans Verkuil
2023-09-15 10:35 ` Martin Tůma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230912120745.902-1-tumic@gpxsee.org \
--to=tumic@gpxsee.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.tuma@digiteqautomotive.com \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®