From: Ulf Hansson <ulf.hansson@linaro.org>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org
Subject: [PATCH 08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem
Date: Thu, 14 Sep 2023 13:17:53 +0200 [thread overview]
Message-ID: <20230914111753.586627-1-ulf.hansson@linaro.org> (raw)
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/pmdomain/Kconfig | 1 +
drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++
drivers/soc/qcom/Kconfig | 37 -------------------------------
3 files changed, 42 insertions(+), 37 deletions(-)
create mode 100644 drivers/pmdomain/qcom/Kconfig
diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 5929f2d31588..d7b554c5c384 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig"
source "drivers/pmdomain/bcm/Kconfig"
source "drivers/pmdomain/imx/Kconfig"
source "drivers/pmdomain/mediatek/Kconfig"
+source "drivers/pmdomain/qcom/Kconfig"
endmenu
diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig
new file mode 100644
index 000000000000..c67308337805
--- /dev/null
+++ b/drivers/pmdomain/qcom/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Qualcomm Power Domains"
+
+config QCOM_CPR
+ tristate "QCOM Core Power Reduction (CPR) support"
+ depends on ARCH_QCOM && HAS_IOMEM
+ select PM_OPP
+ select REGMAP
+ help
+ Say Y here to enable support for the CPR hardware found on Qualcomm
+ SoCs like QCS404.
+
+ This driver populates CPU OPPs tables and makes adjustments to the
+ tables based on feedback from the CPR hardware. If you want to do
+ CPUfrequency scaling say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-cpr
+
+config QCOM_RPMHPD
+ tristate "Qualcomm RPMh Power domain driver"
+ depends on QCOM_RPMH && QCOM_COMMAND_DB
+ help
+ QCOM RPMh Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPMh which then translates it into corresponding voltage
+ for the voltage rail.
+
+config QCOM_RPMPD
+ tristate "Qualcomm RPM Power domain driver"
+ depends on PM && OF
+ depends on QCOM_SMD_RPM
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
+ help
+ QCOM RPM Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPM which then translates it into corresponding voltage
+ for the voltage rail.
+
+endmenu
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 715348869d04..b3634e10f6f5 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -26,22 +26,6 @@ config QCOM_COMMAND_DB
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.
-config QCOM_CPR
- tristate "QCOM Core Power Reduction (CPR) support"
- depends on ARCH_QCOM && HAS_IOMEM
- select PM_OPP
- select REGMAP
- help
- Say Y here to enable support for the CPR hardware found on Qualcomm
- SoCs like QCS404.
-
- This driver populates CPU OPPs tables and makes adjustments to the
- tables based on feedback from the CPR hardware. If you want to do
- CPUfrequency scaling say Y here.
-
- To compile this driver as a module, choose M here: the module will
- be called qcom-cpr
-
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
@@ -157,27 +141,6 @@ config QCOM_RPMH
of hardware components aggregate requests for these resources and
help apply the aggregated state on the resource.
-config QCOM_RPMHPD
- tristate "Qualcomm RPMh Power domain driver"
- depends on QCOM_RPMH && QCOM_COMMAND_DB
- help
- QCOM RPMh Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPMh which then translates it into corresponding voltage
- for the voltage rail.
-
-config QCOM_RPMPD
- tristate "Qualcomm RPM Power domain driver"
- depends on PM && OF
- depends on QCOM_SMD_RPM
- select PM_GENERIC_DOMAINS
- select PM_GENERIC_DOMAINS_OF
- help
- QCOM RPM Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPM which then translates it into corresponding voltage
- for the voltage rail.
-
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM || COMPILE_TEST
--
2.34.1
next reply other threads:[~2023-09-14 11:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-14 11:17 Ulf Hansson [this message]
2023-09-14 11:37 ` Konrad Dybcio
2023-09-14 16:11 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230914111753.586627-1-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®