From: Andrew Jones <ajones@ventanamicro.com>
To: Conor Dooley <conor@kernel.org>
Cc: palmer@dabbelt.com, Conor Dooley <conor.dooley@microchip.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1] RISC-V: capitalise CMO op macros
Date: Sat, 16 Sep 2023 08:27:29 +0200 [thread overview]
Message-ID: <20230916-b290c565eabad8c5935a85c2@orel> (raw)
In-Reply-To: <20230915-aloe-dollar-994937477776@spud>
On Fri, Sep 15, 2023 at 04:40:44PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> The CMO op macros initially used lower case, as the original iteration
> of the ALT_CMO_OP alternative stringified the first parameter to
> finalise the assembly for the standard variant.
> As a knock-on, the T-Head versions of these CMOs had to use mixed case
> defines. Commit dd23e9535889 ("RISC-V: replace cbom instructions with
> an insn-def") removed the asm construction with stringify, replacing it
> an insn-def macro, rending the lower-case surplus to requirements.
> As far as I can tell from a brief check, CBO_zero does not see similar
> use and didn't require the mixed case define in the first place.
> Replace the lower case characters now for consistency with other
> insn-def macros in the standard and T-Head forms, and adjust the
> callsites.
>
> Suggested-by: Andrew Jones <ajones@ventanamicro.com>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> CC: Paul Walmsley <paul.walmsley@sifive.com>
> CC: Palmer Dabbelt <palmer@dabbelt.com>
> CC: linux-riscv@lists.infradead.org
> CC: linux-kernel@vger.kernel.org
> ---
> arch/riscv/include/asm/errata_list.h | 6 +++---
> arch/riscv/include/asm/insn-def.h | 8 +++----
> arch/riscv/lib/clear_page.S | 32 ++++++++++++++--------------
> arch/riscv/mm/dma-noncoherent.c | 8 +++----
> arch/riscv/mm/pmem.c | 4 ++--
> 5 files changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
> index e2ecd01bfac7..5801af83d154 100644
> --- a/arch/riscv/include/asm/errata_list.h
> +++ b/arch/riscv/include/asm/errata_list.h
> @@ -117,9 +117,9 @@ asm volatile(ALTERNATIVE( \
> * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
> * 0000000 11001 00000 000 00000 0001011
> */
> -#define THEAD_inval_A0 ".long 0x0265000b"
> -#define THEAD_clean_A0 ".long 0x0245000b"
> -#define THEAD_flush_A0 ".long 0x0275000b"
> +#define THEAD_INVAL_A0 ".long 0x0265000b"
> +#define THEAD_CLEAN_A0 ".long 0x0245000b"
> +#define THEAD_FLUSH_A0 ".long 0x0275000b"
> #define THEAD_SYNC_S ".long 0x0190000b"
>
> #define ALT_CMO_OP(_op, _start, _size, _cachesize) \
> diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
> index 6960beb75f32..e27179b26086 100644
> --- a/arch/riscv/include/asm/insn-def.h
> +++ b/arch/riscv/include/asm/insn-def.h
> @@ -180,19 +180,19 @@
> INSN_R(OPCODE_SYSTEM, FUNC3(0), FUNC7(51), \
> __RD(0), RS1(gaddr), RS2(vmid))
>
> -#define CBO_inval(base) \
> +#define CBO_INVAL(base) \
> INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0), \
> RS1(base), SIMM12(0))
>
> -#define CBO_clean(base) \
> +#define CBO_CLEAN(base) \
> INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0), \
> RS1(base), SIMM12(1))
>
> -#define CBO_flush(base) \
> +#define CBO_FLUSH(base) \
> INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0), \
> RS1(base), SIMM12(2))
>
> -#define CBO_zero(base) \
> +#define CBO_ZERO(base) \
> INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0), \
> RS1(base), SIMM12(4))
>
> diff --git a/arch/riscv/lib/clear_page.S b/arch/riscv/lib/clear_page.S
> index d7a256eb53f4..b22de1231144 100644
> --- a/arch/riscv/lib/clear_page.S
> +++ b/arch/riscv/lib/clear_page.S
> @@ -29,41 +29,41 @@ SYM_FUNC_START(clear_page)
> lw a1, riscv_cboz_block_size
> add a2, a0, a2
> .Lzero_loop:
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> CBOZ_ALT(11, "bltu a0, a2, .Lzero_loop; ret", "nop; nop")
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> CBOZ_ALT(10, "bltu a0, a2, .Lzero_loop; ret", "nop; nop")
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> CBOZ_ALT(9, "bltu a0, a2, .Lzero_loop; ret", "nop; nop")
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> CBOZ_ALT(8, "bltu a0, a2, .Lzero_loop; ret", "nop; nop")
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> - CBO_zero(a0)
> + CBO_ZERO(a0)
> add a0, a0, a1
> bltu a0, a2, .Lzero_loop
> ret
> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index b76e7e192eb1..607d5f47d437 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -31,7 +31,7 @@ static inline void arch_dma_cache_wback(phys_addr_t paddr, size_t size)
> return;
> }
> #endif
> - ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(CLEAN, vaddr, size, riscv_cbom_block_size);
> }
>
> static inline void arch_dma_cache_inv(phys_addr_t paddr, size_t size)
> @@ -45,7 +45,7 @@ static inline void arch_dma_cache_inv(phys_addr_t paddr, size_t size)
> }
> #endif
>
> - ALT_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(INVAL, vaddr, size, riscv_cbom_block_size);
> }
>
> static inline void arch_dma_cache_wback_inv(phys_addr_t paddr, size_t size)
> @@ -59,7 +59,7 @@ static inline void arch_dma_cache_wback_inv(phys_addr_t paddr, size_t size)
> }
> #endif
>
> - ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(FLUSH, vaddr, size, riscv_cbom_block_size);
> }
>
> static inline bool arch_sync_dma_clean_before_fromdevice(void)
> @@ -131,7 +131,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
> }
> #endif
>
> - ALT_CMO_OP(flush, flush_addr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(FLUSH, flush_addr, size, riscv_cbom_block_size);
> }
>
> void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
> diff --git a/arch/riscv/mm/pmem.c b/arch/riscv/mm/pmem.c
> index c5fc5ec96f6d..370a422ede11 100644
> --- a/arch/riscv/mm/pmem.c
> +++ b/arch/riscv/mm/pmem.c
> @@ -17,7 +17,7 @@ void arch_wb_cache_pmem(void *addr, size_t size)
> return;
> }
> #endif
> - ALT_CMO_OP(clean, addr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(CLEAN, addr, size, riscv_cbom_block_size);
> }
> EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
>
> @@ -29,6 +29,6 @@ void arch_invalidate_pmem(void *addr, size_t size)
> return;
> }
> #endif
> - ALT_CMO_OP(inval, addr, size, riscv_cbom_block_size);
> + ALT_CMO_OP(INVAL, addr, size, riscv_cbom_block_size);
> }
> EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
> --
> 2.39.2
>
If it compiles, ship it :-)
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Thanks,
drew
next prev parent reply other threads:[~2023-09-16 6:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 15:40 Conor Dooley
2023-09-16 6:27 ` Andrew Jones [this message]
2023-11-06 15:00 ` patchwork-bot+linux-riscv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230916-b290c565eabad8c5935a85c2@orel \
--to=ajones@ventanamicro.com \
--cc=conor.dooley@microchip.com \
--cc=conor@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®