From: John Watts <contact@jookia.org>
To: dri-devel@lists.freedesktop.org
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
Chris Morgan <macromorgan@hotmail.com>,
Jagan Teki <jagan@edgeble.ai>, John Watts <contact@jookia.org>,
Paul Cercueil <paul@crapouillou.net>,
Christophe Branchereau <cbranchereau@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH v2 6/9] drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display
Date: Mon, 18 Sep 2023 22:58:50 +1000 [thread overview]
Message-ID: <20230918125853.2249187-7-contact@jookia.org> (raw)
In-Reply-To: <20230918125853.2249187-1-contact@jookia.org>
This display is extremely similar to the LTK035C5444T, but still has
some minor variations in panel initialization.
Signed-off-by: John Watts <contact@jookia.org>
---
.../gpu/drm/panel/panel-newvision-nv3052c.c | 223 ++++++++++++++++++
1 file changed, 223 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 2b24c684a8ac..a42c38d93f52 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -238,6 +238,201 @@ static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
};
+static const struct nv3052c_reg fs035vg158_panel_regs[] = {
+ // EXTC Command set enable, select page 1
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+ // Mostly unknown registers
+ { 0xe3, 0x00 },
+ { 0x40, 0x00 },
+ { 0x03, 0x40 },
+ { 0x04, 0x00 },
+ { 0x05, 0x03 },
+ { 0x08, 0x00 },
+ { 0x09, 0x07 },
+ { 0x0a, 0x01 },
+ { 0x0b, 0x32 },
+ { 0x0c, 0x32 },
+ { 0x0d, 0x0b },
+ { 0x0e, 0x00 },
+ { 0x23, 0x20 }, // RGB interface control: DE MODE PCLK-N
+ { 0x24, 0x0c },
+ { 0x25, 0x06 },
+ { 0x26, 0x14 },
+ { 0x27, 0x14 },
+ { 0x38, 0x9c }, //VCOM_ADJ1, different to ltk035c5444t
+ { 0x39, 0xa7 }, //VCOM_ADJ2, different to ltk035c5444t
+ { 0x3a, 0x50 }, //VCOM_ADJ3, different to ltk035c5444t
+ { 0x28, 0x40 },
+ { 0x29, 0x01 },
+ { 0x2a, 0xdf },
+ { 0x49, 0x3c },
+ { 0x91, 0x57 }, //EXTPW_CTRL2, different to ltk035c5444t
+ { 0x92, 0x57 }, //EXTPW_CTRL3, different to ltk035c5444t
+ { 0xa0, 0x55 },
+ { 0xa1, 0x50 },
+ { 0xa4, 0x9c },
+ { 0xa7, 0x02 },
+ { 0xa8, 0x01 },
+ { 0xa9, 0x01 },
+ { 0xaa, 0xfc },
+ { 0xab, 0x28 },
+ { 0xac, 0x06 },
+ { 0xad, 0x06 },
+ { 0xae, 0x06 },
+ { 0xaf, 0x03 },
+ { 0xb0, 0x08 },
+ { 0xb1, 0x26 },
+ { 0xb2, 0x28 },
+ { 0xb3, 0x28 },
+ { 0xb4, 0x03 }, // Unknown, different to ltk035c5444
+ { 0xb5, 0x08 },
+ { 0xb6, 0x26 },
+ { 0xb7, 0x08 },
+ { 0xb8, 0x26 },
+ { 0xf0, 0x00 },
+ { 0xf6, 0xc0 },
+ // EXTC Command set enable, select page 0
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+ // Set gray scale voltage to adjust gamma
+ { 0xb0, 0x0b }, // PGAMVR0
+ { 0xb1, 0x16 }, // PGAMVR1
+ { 0xb2, 0x17 }, // PGAMVR2
+ { 0xb3, 0x2c }, // PGAMVR3
+ { 0xb4, 0x32 }, // PGAMVR4
+ { 0xb5, 0x3b }, // PGAMVR5
+ { 0xb6, 0x29 }, // PGAMPR0
+ { 0xb7, 0x40 }, // PGAMPR1
+ { 0xb8, 0x0d }, // PGAMPK0
+ { 0xb9, 0x05 }, // PGAMPK1
+ { 0xba, 0x12 }, // PGAMPK2
+ { 0xbb, 0x10 }, // PGAMPK3
+ { 0xbc, 0x12 }, // PGAMPK4
+ { 0xbd, 0x15 }, // PGAMPK5
+ { 0xbe, 0x19 }, // PGAMPK6
+ { 0xbf, 0x0e }, // PGAMPK7
+ { 0xc0, 0x16 }, // PGAMPK8
+ { 0xc1, 0x0a }, // PGAMPK9
+ // Set gray scale voltage to adjust gamma
+ { 0xd0, 0x0c }, // NGAMVR0
+ { 0xd1, 0x17 }, // NGAMVR0
+ { 0xd2, 0x14 }, // NGAMVR1
+ { 0xd3, 0x2e }, // NGAMVR2
+ { 0xd4, 0x32 }, // NGAMVR3
+ { 0xd5, 0x3c }, // NGAMVR4
+ { 0xd6, 0x22 }, // NGAMPR0
+ { 0xd7, 0x3d }, // NGAMPR1
+ { 0xd8, 0x0d }, // NGAMPK0
+ { 0xd9, 0x07 }, // NGAMPK1
+ { 0xda, 0x13 }, // NGAMPK2
+ { 0xdb, 0x13 }, // NGAMPK3
+ { 0xdc, 0x11 }, // NGAMPK4
+ { 0xdd, 0x15 }, // NGAMPK5
+ { 0xde, 0x19 }, // NGAMPK6
+ { 0xdf, 0x10 }, // NGAMPK7
+ { 0xe0, 0x17 }, // NGAMPK8
+ { 0xe1, 0x0a }, // NGAMPK9
+ // EXTC Command set enable, select page 3
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+ // Set various timing settings
+ { 0x00, 0x2a }, // GIP_VST_1
+ { 0x01, 0x2a }, // GIP_VST_2
+ { 0x02, 0x2a }, // GIP_VST_3
+ { 0x03, 0x2a }, // GIP_VST_4
+ { 0x04, 0x61 }, // GIP_VST_5
+ { 0x05, 0x80 }, // GIP_VST_6
+ { 0x06, 0xc7 }, // GIP_VST_7
+ { 0x07, 0x01 }, // GIP_VST_8
+ { 0x08, 0x03 }, // GIP_VST_9
+ { 0x09, 0x04 }, // GIP_VST_10
+ { 0x70, 0x22 }, // GIP_ECLK1
+ { 0x71, 0x80 }, // GIP_ECLK2
+ { 0x30, 0x2a }, // GIP_CLK_1
+ { 0x31, 0x2a }, // GIP_CLK_2
+ { 0x32, 0x2a }, // GIP_CLK_3
+ { 0x33, 0x2a }, // GIP_CLK_4
+ { 0x34, 0x61 }, // GIP_CLK_5
+ { 0x35, 0xc5 }, // GIP_CLK_6
+ { 0x36, 0x80 }, // GIP_CLK_7
+ { 0x37, 0x23 }, // GIP_CLK_8
+ { 0x40, 0x03 }, // GIP_CLKA_1
+ { 0x41, 0x04 }, // GIP_CLKA_2
+ { 0x42, 0x05 }, // GIP_CLKA_3
+ { 0x43, 0x06 }, // GIP_CLKA_4
+ { 0x44, 0x11 }, // GIP_CLKA_5
+ { 0x45, 0xe8 }, // GIP_CLKA_6
+ { 0x46, 0xe9 }, // GIP_CLKA_7
+ { 0x47, 0x11 }, // GIP_CLKA_8
+ { 0x48, 0xea }, // GIP_CLKA_9
+ { 0x49, 0xeb }, // GIP_CLKA_10
+ { 0x50, 0x07 }, // GIP_CLKB_1
+ { 0x51, 0x08 }, // GIP_CLKB_2
+ { 0x52, 0x09 }, // GIP_CLKB_3
+ { 0x53, 0x0a }, // GIP_CLKB_4
+ { 0x54, 0x11 }, // GIP_CLKB_5
+ { 0x55, 0xec }, // GIP_CLKB_6
+ { 0x56, 0xed }, // GIP_CLKB_7
+ { 0x57, 0x11 }, // GIP_CLKB_8
+ { 0x58, 0xef }, // GIP_CLKB_9
+ { 0x59, 0xf0 }, // GIP_CLKB_10
+ // Map internal GOA signals to GOA output pad
+ { 0xb1, 0x01 }, // PANELD2U2
+ { 0xb4, 0x15 }, // PANELD2U5
+ { 0xb5, 0x16 }, // PANELD2U6
+ { 0xb6, 0x09 }, // PANELD2U7
+ { 0xb7, 0x0f }, // PANELD2U8
+ { 0xb8, 0x0d }, // PANELD2U9
+ { 0xb9, 0x0b }, // PANELD2U10
+ { 0xba, 0x00 }, // PANELD2U11
+ { 0xc7, 0x02 }, // PANELD2U24
+ { 0xca, 0x17 }, // PANELD2U27
+ { 0xcb, 0x18 }, // PANELD2U28
+ { 0xcc, 0x0a }, // PANELD2U29
+ { 0xcd, 0x10 }, // PANELD2U30
+ { 0xce, 0x0e }, // PANELD2U31
+ { 0xcf, 0x0c }, // PANELD2U32
+ { 0xd0, 0x00 }, // PANELD2U33
+ // Map internal GOA signals to GOA output pad
+ { 0x81, 0x00 }, // PANELU2D2
+ { 0x84, 0x15 }, // PANELU2D5
+ { 0x85, 0x16 }, // PANELU2D6
+ { 0x86, 0x10 }, // PANELU2D7
+ { 0x87, 0x0a }, // PANELU2D8
+ { 0x88, 0x0c }, // PANELU2D9
+ { 0x89, 0x0e }, // PANELU2D10
+ { 0x8a, 0x02 }, // PANELU2D11
+ { 0x97, 0x00 }, // PANELU2D24
+ { 0x9a, 0x17 }, // PANELU2D27
+ { 0x9b, 0x18 }, // PANELU2D28
+ { 0x9c, 0x0f }, // PANELU2D29
+ { 0x9d, 0x09 }, // PANELU2D30
+ { 0x9e, 0x0b }, // PANELU2D31
+ { 0x9f, 0x0d }, // PANELU2D32
+ { 0xa0, 0x01 }, // PANELU2D33
+ // EXTC Command set enable, select page 2
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+ // Unknown registers
+ { 0x01, 0x01 },
+ { 0x02, 0xda },
+ { 0x03, 0xba },
+ { 0x04, 0xa8 },
+ { 0x05, 0x9a },
+ { 0x06, 0x70 },
+ { 0x07, 0xff },
+ { 0x08, 0x91 },
+ { 0x09, 0x90 },
+ { 0x0a, 0xff },
+ { 0x0b, 0x8f },
+ { 0x0c, 0x60 },
+ { 0x0d, 0x58 },
+ { 0x0e, 0x48 },
+ { 0x0f, 0x38 },
+ { 0x10, 0x2b },
+ // EXTC Command set enable, select page 0
+ { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+ // Display Access Control
+ { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
+};
+
static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
{
return container_of(panel, struct nv3052c, panel);
@@ -463,6 +658,21 @@ static const struct drm_display_mode ltk035c5444t_modes[] = {
},
};
+static const struct drm_display_mode fs035vg158_modes[] = {
+ { /* 60 Hz */
+ .clock = 21000,
+ .hdisplay = 640,
+ .hsync_start = 640 + 34,
+ .hsync_end = 640 + 34 + 4,
+ .htotal = 640 + 34 + 4 + 20,
+ .vdisplay = 480,
+ .vsync_start = 480 + 12,
+ .vsync_end = 480 + 12 + 4,
+ .vtotal = 480 + 12 + 4 + 6,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ },
+};
+
static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
.display_modes = ltk035c5444t_modes,
.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
@@ -474,14 +684,27 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
};
+static const struct nv3052c_panel_info fs035vg158_panel_info = {
+ .display_modes = fs035vg158_modes,
+ .num_modes = ARRAY_SIZE(fs035vg158_modes),
+ .width_mm = 70,
+ .height_mm = 53,
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .panel_regs = fs035vg158_panel_regs,
+ .panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs),
+};
+
static const struct spi_device_id nv3052c_ids[] = {
{ "ltk035c5444t", },
+ { "fs035vg158", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, nv3052c_ids);
static const struct of_device_id nv3052c_of_match[] = {
{ .compatible = "leadtek,ltk035c5444t", .data = <k035c5444t_panel_info },
+ { .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, nv3052c_of_match);
--
2.42.0
next prev parent reply other threads:[~2023-09-18 13:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-18 12:58 [RFC PATCH v2 0/9] Add FS035VG158 panel John Watts
2023-09-18 12:58 ` [RFC PATCH v2 1/9] drm/panel: nv3052c: Document known register names John Watts
2023-09-18 12:58 ` [RFC PATCH v2 2/9] drm/panel: nv3052c: Add SPI device IDs John Watts
2023-09-18 12:58 ` [RFC PATCH v2 3/9] drm/panel: nv3052c: Sleep for 150ms after reset John Watts
2023-09-18 20:19 ` Jessica Zhang
2023-09-18 20:52 ` John Watts
2023-09-18 21:01 ` Paul Cercueil
2023-09-18 21:08 ` John Watts
2023-09-18 21:34 ` Paul Cercueil
2023-09-18 21:40 ` John Watts
2023-09-18 12:58 ` [RFC PATCH v2 4/9] drm/panel: nv3052c: Wait before entering sleep mode John Watts
2023-09-18 20:27 ` Jessica Zhang
2023-09-18 12:58 ` [RFC PATCH v2 5/9] drm/panel: nv3052c: Allow specifying registers per panel John Watts
2023-09-18 12:58 ` John Watts [this message]
2023-09-18 20:35 ` [RFC PATCH v2 6/9] drm/panel: nv3052c: Add Fascontek FS035VG158 LCD display Jessica Zhang
2023-09-18 12:58 ` [RFC PATCH v2 7/9] dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties John Watts
2023-09-18 22:28 ` Rob Herring
2023-09-18 12:58 ` [RFC PATCH v2 8/9] dt-bindings: vendor-prefixes: Add fascontek John Watts
2023-09-18 12:58 ` [RFC PATCH v2 9/9] dt-bindings: display: panel: add Fascontek FS035VG158 panel John Watts
2023-09-18 22:29 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230918125853.2249187-7-contact@jookia.org \
--to=contact@jookia.org \
--cc=airlied@gmail.com \
--cc=cbranchereau@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=jagan@edgeble.ai \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=macromorgan@hotmail.com \
--cc=neil.armstrong@linaro.org \
--cc=paul@crapouillou.net \
--cc=quic_jesszhan@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®