[PATCH v1] mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw

[Pablo Sun <pablo.sun@mediatek.com>]

Use atomic readl_poll_timeout_atomic, because msdc_reset_hw
may be invoked in IRQ handler in the following context:

  msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw()

The following kernel BUG stack trace can be observed on
Genio 1200 EVK after initializing MSDC1 hardware during kernel boot:

[    1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002
[    1.189157] Modules linked in:
[    1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.15.42-mtk+modified #1
[    1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT)
[    1.206484] Call trace:
[    1.206796]  dump_backtrace+0x0/0x1ac
[    1.207266]  show_stack+0x24/0x30
[    1.207692]  dump_stack_lvl+0x68/0x84
[    1.208162]  dump_stack+0x1c/0x38
[    1.208587]  __schedule_bug+0x68/0x80
[    1.209056]  __schedule+0x6ec/0x7c0
[    1.209502]  schedule+0x7c/0x110
[    1.209915]  schedule_hrtimeout_range_clock+0xc4/0x1f0
[    1.210569]  schedule_hrtimeout_range+0x20/0x30
[    1.211148]  usleep_range_state+0x84/0xc0
[    1.211661]  msdc_reset_hw+0xc8/0x1b0
[    1.212134]  msdc_cmd_done.isra.0+0x4ac/0x5f0
[    1.212693]  msdc_irq+0x104/0x2d4
[    1.213121]  __handle_irq_event_percpu+0x68/0x280
[    1.213725]  handle_irq_event+0x70/0x15c
[    1.214230]  handle_fasteoi_irq+0xb0/0x1a4
[    1.214755]  handle_domain_irq+0x6c/0x9c
[    1.215260]  gic_handle_irq+0xc4/0x180
[    1.215741]  call_on_irq_stack+0x2c/0x54
[    1.216245]  do_interrupt_handler+0x5c/0x70
[    1.216782]  el1_interrupt+0x30/0x80
[    1.217242]  el1h_64_irq_handler+0x1c/0x2c
[    1.217769]  el1h_64_irq+0x78/0x7c
[    1.218206]  cpuidle_enter_state+0xc8/0x600
[    1.218744]  cpuidle_enter+0x44/0x5c
[    1.219205]  do_idle+0x224/0x2d0
[    1.219624]  cpu_startup_entry+0x30/0x80
[    1.220129]  rest_init+0x108/0x134
[    1.220568]  arch_call_rest_init+0x1c/0x28
[    1.221094]  start_kernel+0x6c0/0x700
[    1.221564]  __primary_switched+0xc0/0xc8

Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling")
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5392200cfdf7..97f7c3d4be6e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host)
 	u32 val;
 
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
-	readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
+	readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
 
 	sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
-	readl_poll_timeout(host->base + MSDC_FIFOCS, val,
-			   !(val & MSDC_FIFOCS_CLR), 0, 0);
+	readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val,
+				  !(val & MSDC_FIFOCS_CLR), 0, 0);
 
 	val = readl(host->base + MSDC_INT);
 	writel(val, host->base + MSDC_INT);
-- 
2.18.0