From: Alain Volmat <alain.volmat@foss.st.com>
To: Alain Volmat <alain.volmat@foss.st.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Andrey Skvortsov <andrej.skvortzov@gmail.com>,
Rob Herring <robh@kernel.org>, <linux-media@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings
Date: Tue, 26 Sep 2023 11:28:19 +0200 [thread overview]
Message-ID: <20230926092825.819229-2-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20230926092825.819229-1-alain.volmat@foss.st.com>
Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
.../bindings/media/i2c/galaxycore,gc2145.yaml | 108 ++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 110 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 000000000000..e80b581498fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+ - Alain Volmat <alain.volmat@foss.st.com>
+
+description: |
+ The Galaxy Core GC2145 is a high quality 2 Mega CMOS image sensor, for mobile
+ phone camera applications and digital camera products. GC2145 incorporates a
+ 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+ processor. It is programmable through an I2C interface. Image data is sent
+ either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: galaxycore,gc2145
+
+ reg:
+ enum:
+ - 0x3c
+
+ clocks:
+ description: Reference to the xclk clock.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO descriptor for the powerdown pin.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO descriptor for the reset pin.
+ maxItems: 1
+
+ IOVDD-supply:
+ description: Power Supply for I/O circuits (1.7 - 3V).
+
+ AVDD-supply:
+ description: Power for analog circuit/sensor array (2.7 - 3V).
+
+ DVDD-supply:
+ description: Power for digital core (1.7 - 1.9V).
+
+ orientation: true
+
+ rotation: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ required:
+ - endpoint
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - powerdown-gpios
+ - reset-gpios
+ - IOVDD-supply
+ - AVDD-supply
+ - DVDD-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gc2145@3c {
+ compatible = "galaxycore,gc2145";
+ reg = <0x3c>;
+ clocks = <&clk_ext_camera>;
+ IOVDD-supply = <&scmi_v3v3_sw>;
+ AVDD-supply = <&scmi_v3v3_sw>;
+ DVDD-supply = <&scmi_v3v3_sw>;
+ powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+ reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mipid02_0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 573578db9509..d9df03bba5bb 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -494,6 +494,8 @@ patternProperties:
description: Fujitsu Ltd.
"^fxtec,.*":
description: FX Technology Ltd.
+ "^galaxycore,.*":
+ description: Galaxy Core Inc.
"^gardena,.*":
description: GARDENA GmbH
"^gateworks,.*":
--
2.25.1
next prev parent reply other threads:[~2023-09-26 9:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 9:28 [PATCH 0/2] media: i2c: gc2145: GC2145 sensor support Alain Volmat
2023-09-26 9:28 ` Alain Volmat [this message]
2023-09-26 13:32 ` [PATCH 1/2] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings Conor Dooley
2023-09-26 18:49 ` Krzysztof Kozlowski
2023-09-26 9:28 ` [PATCH 2/2] media: i2c: gc2145: Galaxy Core GC2145 sensor support Alain Volmat
2023-09-26 16:21 ` kernel test robot
2023-09-27 13:54 ` Jacopo Mondi
2023-10-11 17:26 ` Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230926092825.819229-2-alain.volmat@foss.st.com \
--to=alain.volmat@foss.st.com \
--cc=andrej.skvortzov@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®