From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: mchehab@kernel.org, tfiga@chromium.org, m.szyprowski@samsung.com,
ming.qian@nxp.com, ezequiel@vanguardiasur.com.ar,
p.zabel@pengutronix.de, gregkh@linuxfoundation.org,
hverkuil-cisco@xs4all.nl, nicolas.dufresne@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, kernel@collabora.com,
Benjamin Gaignard <benjamin.gaignard@collabora.com>
Subject: [PATCH v8 50/53] media: core: Free range of buffers
Date: Wed, 27 Sep 2023 17:35:55 +0200 [thread overview]
Message-ID: <20230927153558.159278-51-benjamin.gaignard@collabora.com> (raw)
In-Reply-To: <20230927153558.159278-1-benjamin.gaignard@collabora.com>
Improve __vb2_queue_free() and __vb2_free_mem() to free
range of buffers and not only the last few buffers.
Intoduce starting index to be flexible on range and change the loops
according to this parameters.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
---
.../media/common/videobuf2/videobuf2-core.c | 36 ++++++++-----------
1 file changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index 8d35cf7cef42..3bf455f03461 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -518,13 +518,12 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
/*
* __vb2_free_mem() - release all video buffer memory for a given queue
*/
-static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers)
+static void __vb2_free_mem(struct vb2_queue *q, unsigned int start, unsigned int count)
{
- unsigned int buffer = 0;
- long i = q->max_num_buffers;
+ unsigned int i;
struct vb2_buffer *vb;
- for (i = q->max_num_buffers; i >= 0 && buffer < buffers; i--) {
+ for (i = start; i < q->max_num_buffers && i < start + count; i++) {
vb = vb2_get_buffer(q, i);
if (!vb)
continue;
@@ -536,36 +535,32 @@ static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers)
__vb2_buf_dmabuf_put(vb);
else
__vb2_buf_userptr_put(vb);
- buffer++;
}
}
/*
- * __vb2_queue_free() - free buffers at the end of the queue - video memory and
+ * __vb2_queue_free() - free count buffers from start index of the queue - video memory and
* related information, if no buffers are left return the queue to an
* uninitialized state. Might be called even if the queue has already been freed.
*/
-static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
+static void __vb2_queue_free(struct vb2_queue *q, unsigned int start, unsigned int count)
{
- unsigned int buffer;
- long i = q->max_num_buffers;
+ unsigned int i;
lockdep_assert_held(&q->mmap_lock);
/* Call driver-provided cleanup function for each buffer, if provided */
- for (i = q->max_num_buffers, buffer = 0; i >= 0 && buffer < buffers; i--) {
+ for (i = start; i < q->max_num_buffers && i < start + count; i++) {
struct vb2_buffer *vb = vb2_get_buffer(q, i);
if (!vb)
continue;
- if (vb->planes[0].mem_priv) {
+ if (vb->planes[0].mem_priv)
call_void_vb_qop(vb, buf_cleanup, vb);
- buffer++;
- }
}
/* Release video buffer memory */
- __vb2_free_mem(q, buffers);
+ __vb2_free_mem(q, start, count);
#ifdef CONFIG_VIDEO_ADV_DEBUG
/*
@@ -650,15 +645,14 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
#endif
/* Free vb2 buffers */
- for (i = q->max_num_buffers, buffer = 0; i > 0 && buffer < buffers; i--) {
- struct vb2_buffer *vb = vb2_get_buffer(q, buffer);
+ for (i = start; i < q->max_num_buffers && i < start + count; i++) {
+ struct vb2_buffer *vb = vb2_get_buffer(q, i);
if (!vb)
continue;
vb2_queue_remove_buffer(vb);
kfree(vb);
- buffer++;
}
if (!vb2_get_num_buffers(q)) {
@@ -852,7 +846,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
* queued without ever calling STREAMON.
*/
__vb2_queue_cancel(q);
- __vb2_queue_free(q, q_num_bufs);
+ __vb2_queue_free(q, 0, q_num_bufs);
mutex_unlock(&q->mmap_lock);
/*
@@ -962,7 +956,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
* from already queued buffers and it will reset q->memory to
* VB2_MEMORY_UNKNOWN.
*/
- __vb2_queue_free(q, allocated_buffers);
+ __vb2_queue_free(q, first_index, allocated_buffers);
mutex_unlock(&q->mmap_lock);
return ret;
}
@@ -1102,7 +1096,7 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
* from already queued buffers and it will reset q->memory to
* VB2_MEMORY_UNKNOWN.
*/
- __vb2_queue_free(q, allocated_buffers);
+ __vb2_queue_free(q, *first_index, allocated_buffers);
mutex_unlock(&q->mmap_lock);
return -ENOMEM;
}
@@ -2568,7 +2562,7 @@ void vb2_core_queue_release(struct vb2_queue *q)
__vb2_cleanup_fileio(q);
__vb2_queue_cancel(q);
mutex_lock(&q->mmap_lock);
- __vb2_queue_free(q, q->max_num_buffers);
+ __vb2_queue_free(q, 0, q->max_num_buffers);
kfree(q->bufs);
q->bufs = NULL;
bitmap_free(q->bufs_bitmap);
--
2.39.2
next prev parent reply other threads:[~2023-09-27 15:38 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 15:35 [PATCH v8 00/53] Add DELETE_BUF ioctl Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern Benjamin Gaignard
2023-09-30 8:52 ` Hans Verkuil
2023-09-27 15:35 ` [PATCH v8 02/53] media: videobuf2: Stop spamming kernel log with all queue counter Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 03/53] media: videobuf2: Use vb2_buffer instead of index Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 04/53] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 05/53] media: mediatek: jpeg: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 06/53] media: mediatek: vdec: Remove useless loop Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 07/53] media: sti: hva: Use vb2_get_buffer() instead of directly access to buffers array Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 08/53] media: visl: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 09/53] media: atomisp: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 10/53] media: dvb-core: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 11/53] media: videobuf2: Access vb2_queue bufs array through helper functions Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 12/53] media: videobuf2: Be more flexible on the number of queue stored buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 13/53] media: Report the maximum possible number of buffers for the queue Benjamin Gaignard
2023-10-02 13:37 ` Hans Verkuil
2023-10-02 13:46 ` Benjamin Gaignard
2023-10-02 13:49 ` Hans Verkuil
2023-09-27 15:35 ` [PATCH v8 14/53] media: test-drivers: vivid: Increase max supported buffers for capture queues Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 15/53] media: test-drivers: vicodec: Increase max supported capture queue buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 16/53] media: verisilicon: Refactor postprocessor to store more buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 17/53] media: verisilicon: Store chroma and motion vectors offset Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 18/53] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 19/53] media: verisilicon: vp9: Allow to change resolution while streaming Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 20/53] media: Remove duplicated index vs q->num_buffers check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 21/53] media: core: Add helper to get queue number of buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 22/53] media: dvb-core: Do not initialize twice queue num_buffer field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 23/53] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 24/53] media: video-i2c: Set min_buffers_needed to 2 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 25/53] media: pci: cx18: Set correct value to min_buffers_needed field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 26/53] media: pci: dt3155: Remove useless check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 27/53] media: pci: netup_unidvb: Remove useless number of buffers check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 28/53] media: pci: tw68: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 29/53] media: pci: tw686x: Set min_buffers_needed to 3 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 30/53] media: amphion: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 31/53] media: coda: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 32/53] media: mediatek: vcodec: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 33/53] media: nxp: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 34/53] media: renesas: Set min_buffers_needed to 16 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 35/53] media: ti: Use queue min_buffers_needed field to set the min number of buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 36/53] media: verisilicon: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 37/53] media: test-drivers: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 38/53] media: usb: airspy: Set min_buffers_needed to 8 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 39/53] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 40/53] media: usb: hackrf: Set min_buffers_needed to 8 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 41/53] media: usb: usbtv: Set min_buffers_needed to 2 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 42/53] media: atomisp: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 43/53] media: imx: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 44/53] media: meson: vdec: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 45/53] touchscreen: sur40: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 46/53] sample: v4l: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 47/53] media: cedrus: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 48/53] media: core: Rework how create_buf index returned value is computed Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 49/53] media: core: Add bitmap manage bufs array entries Benjamin Gaignard
2023-09-27 15:35 ` Benjamin Gaignard [this message]
2023-09-30 5:09 ` [PATCH v8 50/53] media: core: Free range of buffers kernel test robot
2023-09-27 15:35 ` [PATCH v8 51/53] media: v4l2: Add DELETE_BUFS ioctl Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 52/53] media: v4l2: Add mem2mem helpers for " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 53/53] media: test-drivers: Use helper " Benjamin Gaignard
2023-09-28 13:04 ` [PATCH v8 00/53] Add DELETE_BUF ioctl Hans Verkuil
2023-09-28 13:16 ` Benjamin Gaignard
2023-09-29 11:44 ` Benjamin Gaignard
2023-09-29 13:17 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927153558.159278-51-benjamin.gaignard@collabora.com \
--to=benjamin.gaignard@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=ming.qian@nxp.com \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®