mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ben Wolsieffer <ben.wolsieffer@hefring.com>
To: linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Ben Wolsieffer <ben.wolsieffer@hefring.com>
Subject: [PATCH 1/2] ARM: dts: stm32: add stm32f7 SDIO sleep pins
Date: Mon,  2 Oct 2023 13:13:38 -0400	[thread overview]
Message-ID: <20231002171339.1594470-2-ben.wolsieffer@hefring.com> (raw)
In-Reply-To: <20231002171339.1594470-1-ben.wolsieffer@hefring.com>

Add SDIO sleep pin definitions that place the pins in analog mode to
save power.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
---
 arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
index 9f65403295ca..26f91ca0d458 100644
--- a/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
@@ -253,6 +253,17 @@ pins2 {
 				};
 			};
 
+			sdio_pins_sleep_a: sdio-pins-sleep-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1 CMD */
+				};
+			};
+
 			sdio_pins_b: sdio-pins-b-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
@@ -284,6 +295,17 @@ pins2 {
 				};
 			};
 
+			sdio_pins_sleep_b: sdio-pins-sleep-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, ANALOG)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, ANALOG)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC2 CMD */
+				};
+			};
+
 			can1_pins_a: can1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
-- 
2.42.0


  reply	other threads:[~2023-10-02 17:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-02 17:13 [PATCH 0/2] ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 Ben Wolsieffer
2023-10-02 17:13 ` Ben Wolsieffer [this message]
2023-10-02 17:13 ` [PATCH 2/2] ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boards Ben Wolsieffer
2023-10-09 12:13 ` [PATCH 0/2] ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231002171339.1594470-2-ben.wolsieffer@hefring.com \
    --to=ben.wolsieffer@hefring.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®