From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: daniel.lezcano@linaro.org, rafael@kernel.org, rui.zhang@intel.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: [PATCH v2 7/7] selftests/thermel/intel: Add test to read power floor status
Date: Mon, 9 Oct 2023 12:05:38 -0700 [thread overview]
Message-ID: <20231009190538.2488792-8-srinivas.pandruvada@linux.intel.com> (raw)
In-Reply-To: <20231009190538.2488792-1-srinivas.pandruvada@linux.intel.com>
Some SoCs have firmware support to notify, if the system can't lower
power limit to a value requested from user space via RAPL constraints.
This test program waits for notification of power floor and prints. This
program can be used to test this feature and also allows other user space
programs to use as a reference.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
v2:
- No change
tools/testing/selftests/Makefile | 1 +
.../thermal/intel/power_floor/Makefile | 12 ++
.../intel/power_floor/power_floor_test.c | 108 ++++++++++++++++++
3 files changed, 121 insertions(+)
create mode 100644 tools/testing/selftests/thermal/intel/power_floor/Makefile
create mode 100644 tools/testing/selftests/thermal/intel/power_floor/power_floor_test.c
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 8d9b2341b79a..3b2061d1c1a5 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -86,6 +86,7 @@ TARGETS += syscall_user_dispatch
TARGETS += sysctl
TARGETS += tc-testing
TARGETS += tdx
+TARGETS += thermal/intel/power_floor
TARGETS += thermal/intel/workload_hint
TARGETS += timens
ifneq (1, $(quicktest))
diff --git a/tools/testing/selftests/thermal/intel/power_floor/Makefile b/tools/testing/selftests/thermal/intel/power_floor/Makefile
new file mode 100644
index 000000000000..9b88e57dbba5
--- /dev/null
+++ b/tools/testing/selftests/thermal/intel/power_floor/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+ifndef CROSS_COMPILE
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
+
+ifeq ($(ARCH),x86)
+TEST_GEN_PROGS := power_floor_test
+
+include ../../../lib.mk
+
+endif
+endif
diff --git a/tools/testing/selftests/thermal/intel/power_floor/power_floor_test.c b/tools/testing/selftests/thermal/intel/power_floor/power_floor_test.c
new file mode 100644
index 000000000000..0326b39a11b9
--- /dev/null
+++ b/tools/testing/selftests/thermal/intel/power_floor/power_floor_test.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <signal.h>
+
+#define POWER_FLOOR_ENABLE_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/power_limits/power_floor_enable"
+#define POWER_FLOOR_STATUS_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/power_limits/power_floor_status"
+
+void power_floor_exit(int signum)
+{
+ int fd;
+
+ /* Disable feature via sysfs knob */
+
+ fd = open(POWER_FLOOR_ENABLE_ATTRIBUTE, O_RDWR);
+ if (fd < 0) {
+ perror("Unable to open power floor enable file\n");
+ exit(1);
+ }
+
+ if (write(fd, "0\n", 2) < 0) {
+ perror("Can' disable power floor notifications\n");
+ exit(1);
+ }
+
+ printf("Disabled power floor notifications\n");
+
+ close(fd);
+}
+
+int main(int argc, char **argv)
+{
+ struct pollfd ufd;
+ char status_str[3];
+ int fd, ret;
+
+ if (signal(SIGINT, power_floor_exit) == SIG_IGN)
+ signal(SIGINT, SIG_IGN);
+ if (signal(SIGHUP, power_floor_exit) == SIG_IGN)
+ signal(SIGHUP, SIG_IGN);
+ if (signal(SIGTERM, power_floor_exit) == SIG_IGN)
+ signal(SIGTERM, SIG_IGN);
+
+ /* Enable feature via sysfs knob */
+ fd = open(POWER_FLOOR_ENABLE_ATTRIBUTE, O_RDWR);
+ if (fd < 0) {
+ perror("Unable to open power floor enable file\n");
+ exit(1);
+ }
+
+ if (write(fd, "1\n", 2) < 0) {
+ perror("Can' enable power floor notifications\n");
+ exit(1);
+ }
+
+ close(fd);
+
+ printf("Enabled power floor notifications\n");
+
+ while (1) {
+ fd = open(POWER_FLOOR_STATUS_ATTRIBUTE, O_RDONLY);
+ if (fd < 0) {
+ perror("Unable to power floor status file\n");
+ exit(1);
+ }
+
+ if ((lseek(fd, 0L, SEEK_SET)) < 0) {
+ fprintf(stderr, "Failed to set pointer to beginning\n");
+ exit(1);
+ }
+
+ if (read(fd, status_str, sizeof(status_str)) < 0) {
+ fprintf(stderr, "Failed to read from:%s\n",
+ POWER_FLOOR_STATUS_ATTRIBUTE);
+ exit(1);
+ }
+
+ ufd.fd = fd;
+ ufd.events = POLLPRI;
+
+ ret = poll(&ufd, 1, -1);
+ if (ret < 0) {
+ perror("poll error");
+ exit(1);
+ } else if (ret == 0) {
+ printf("Poll Timeout\n");
+ } else {
+ if ((lseek(fd, 0L, SEEK_SET)) < 0) {
+ fprintf(stderr, "Failed to set pointer to beginning\n");
+ exit(1);
+ }
+
+ if (read(fd, status_str, sizeof(status_str)) < 0)
+ exit(0);
+
+ printf("power floor status: %s\n", status_str);
+ }
+
+ close(fd);
+ }
+}
--
2.40.1
next prev parent reply other threads:[~2023-10-09 19:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-09 19:05 [PATCH v2 0/7] thermal: processor_thermal: Power " Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 1/7] thermal: int340x: processor_thermal: Move interrupt status MMIO offset to common header Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 2/7] thermal: int340x: processor_thermal: Common function to clear SOC interrupt Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 3/7] thermal: int340x: processor_thermal: Set feature mask before proc_thermal_add Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 4/7] thermal: int340x: processor_thermal: Support power floor notifications Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 5/7] thermal: int340x: processor_thermal: Handle power floor interrupts Srinivas Pandruvada
2023-10-09 19:05 ` [PATCH v2 6/7] thermal: int340x: processor_thermal: Enable power floor support Srinivas Pandruvada
2023-10-09 19:05 ` Srinivas Pandruvada [this message]
2023-10-12 19:14 ` [PATCH v2 0/7] thermal: processor_thermal: Power floor status Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231009190538.2488792-8-srinivas.pandruvada@linux.intel.com \
--to=srinivas.pandruvada@linux.intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®