mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Saravanan Sekar <saravanan@linumiz.com>
To: sravanhome@gmail.com, lgirdwood@gmail.com, broonie@kernel.org,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org, linux@roeck-us.net, jdelvare@suse.com
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-hwmon@vger.kernel.org,
	Saravanan Sekar <saravanan@linumiz.com>
Subject: [PATCH v4 4/4] hwmon: (pmbus/mpq2286) Add a support for mpq2286 Power Management IC
Date: Wed, 11 Oct 2023 22:17:54 +0530	[thread overview]
Message-ID: <20231011164754.449399-5-saravanan@linumiz.com> (raw)
In-Reply-To: <20231011164754.449399-1-saravanan@linumiz.com>

The MPQ2286 is a programmable, high frequency synchronous buck regulator
designed to power a variety of Automotive system peripherals. Single buck
converters with hardware monitoring capability is configurable over PMBus
interface.

Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
---
 drivers/hwmon/pmbus/mpq7932.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/mpq7932.c b/drivers/hwmon/pmbus/mpq7932.c
index 723c314a57a2..67487867c70f 100644
--- a/drivers/hwmon/pmbus/mpq7932.c
+++ b/drivers/hwmon/pmbus/mpq7932.c
@@ -21,6 +21,7 @@
 #define MPQ7932_N_VOLTAGES		256
 #define MPQ7932_VOUT_MAX		0xFF
 #define MPQ7932_NUM_PAGES		6
+#define MPQ2286_NUM_PAGES		1
 
 #define MPQ7932_TON_DELAY		0x60
 #define MPQ7932_VOUT_STARTUP_SLEW	0xA3
@@ -48,6 +49,11 @@ static struct regulator_desc mpq7932_regulators_desc[] = {
 	PMBUS_REGULATOR_STEP("buck", 5, MPQ7932_N_VOLTAGES,
 			     MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
 };
+
+static const struct regulator_desc mpq7932_regulators_desc_one[] = {
+	PMBUS_REGULATOR_STEP_ONE("buck", MPQ7932_N_VOLTAGES,
+				 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+};
 #endif
 
 static int mpq7932_write_word_data(struct i2c_client *client, int page, int reg,
@@ -116,7 +122,10 @@ static int mpq7932_probe(struct i2c_client *client)
 
 #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR)
 	info->num_regulators = info->pages;
-	info->reg_desc = mpq7932_regulators_desc;
+	if (info->num_regulators == 1)
+		info->reg_desc = mpq7932_regulators_desc_one;
+	else
+		info->reg_desc = mpq7932_regulators_desc;
 #endif
 
 	info->read_word_data = mpq7932_read_word_data;
@@ -129,12 +138,14 @@ static int mpq7932_probe(struct i2c_client *client)
 }
 
 static const struct of_device_id mpq7932_of_match[] = {
+	{ .compatible = "mps,mpq2286", .data = (void *)MPQ2286_NUM_PAGES },
 	{ .compatible = "mps,mpq7932", .data = (void *)MPQ7932_NUM_PAGES },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mpq7932_of_match);
 
 static const struct i2c_device_id mpq7932_id[] = {
+	{ "mpq2286", },
 	{ "mpq7932", },
 	{ },
 };
-- 
2.34.1


  parent reply	other threads:[~2023-10-11 16:48 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-11 16:47 [PATCH v4 0/4] Add support for mpq2286 PMIC IC Saravanan Sekar
2023-10-11 16:47 ` [PATCH v4 1/4] hwmon: (pmbus/mpq7932) Get page count based on chip info Saravanan Sekar
2023-10-26  0:49   ` Guenter Roeck
2023-10-11 16:47 ` [PATCH v4 2/4] regulator: dt-bindings: Add mps,mpq2286 power-management IC Saravanan Sekar
2023-10-11 18:22   ` Mark Brown
2023-10-11 18:23   ` Krzysztof Kozlowski
2023-10-26  0:50   ` Guenter Roeck
2023-10-11 16:47 ` [PATCH v4 3/4] hwmon: (pmbus/core) Add helper macro to define single pmbus regulator Saravanan Sekar
2023-10-26  0:51   ` Guenter Roeck
2023-10-11 16:47 ` Saravanan Sekar [this message]
2023-10-26  0:52   ` [PATCH v4 4/4] hwmon: (pmbus/mpq2286) Add a support for mpq2286 Power Management IC Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231011164754.449399-5-saravanan@linumiz.com \
    --to=saravanan@linumiz.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=sravanhome@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®