From: Hsiao Chien Sung <shawn.sung@mediatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
CK Hu <ck.hu@mediatek.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Fei Shao <fshao@chromium.org>, Sean Paul <sean@poorly.run>,
Johnson Wang <johnson.wang@mediatek.corp-partner.google.com>,
"Nancy . Lin" <nancy.lin@mediatek.com>,
Moudy Ho <moudy.ho@mediatek.com>,
Hsiao Chien Sung <shawn.sung@mediatek.com>,
"Jason-JH . Lin" <jason-jh.lin@mediatek.com>,
Nathan Lu <nathan.lu@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v9 22/23] drm/mediatek: Power on devices in OVL adaptor when atomic enable
Date: Wed, 18 Oct 2023 12:36:49 +0800 [thread overview]
Message-ID: <20231018043650.22532-23-shawn.sung@mediatek.com> (raw)
In-Reply-To: <20231018043650.22532-1-shawn.sung@mediatek.com>
Different from OVL, OVL adaptor is a pseudo device so we didn't
define it in the device tree, consequently, pm_runtime_resume_and_get()
called by .atomic_enable() powers on no device in OVL adaptor and
leads to power outage in the corresponding IOMMU.
To resolve the issue, we implement a function to power on the RDMAs
in OVL adaptor, and the system will make sure the IOMMU is powered on
as well because of the device link (iommus) in the RDMA nodes in DTS.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_disp_drv.h | 4 ++
.../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 63 +++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 28 +++------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 20 ++++++
drivers/gpu/drm/mediatek/mtk_mdp_rdma.c | 16 +++++
6 files changed, 112 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index e2b602037ac3..c44f5b31bab5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -109,6 +109,8 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev,
unsigned int next);
void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev,
unsigned int next);
+int mtk_ovl_adaptor_power_on(struct device *dev);
+void mtk_ovl_adaptor_power_off(struct device *dev);
int mtk_ovl_adaptor_clk_enable(struct device *dev);
void mtk_ovl_adaptor_clk_disable(struct device *dev);
void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
@@ -150,6 +152,8 @@ void mtk_rdma_disable_vblank(struct device *dev);
const u32 *mtk_rdma_get_formats(struct device *dev);
size_t mtk_rdma_get_num_formats(struct device *dev);
+int mtk_mdp_rdma_power_on(struct device *dev);
+void mtk_mdp_rdma_power_off(struct device *dev);
int mtk_mdp_rdma_clk_enable(struct device *dev);
void mtk_mdp_rdma_clk_disable(struct device *dev);
void mtk_mdp_rdma_start(struct device *dev, struct cmdq_pkt *cmdq_pkt);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 753a7f829173..35bbce35b7b5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -98,6 +98,8 @@ static const struct mtk_ddp_comp_funcs padding = {
};
static const struct mtk_ddp_comp_funcs rdma = {
+ .power_on = mtk_mdp_rdma_power_on,
+ .power_off = mtk_mdp_rdma_power_off,
.clk_enable = mtk_mdp_rdma_clk_enable,
.clk_disable = mtk_mdp_rdma_clk_disable,
};
@@ -241,6 +243,67 @@ void mtk_ovl_adaptor_stop(struct device *dev)
}
}
+/**
+ * power_off - Power off the devices in OVL adaptor
+ * @dev: Device to be powered off
+ * @num: Number of the devices to be powered off
+ *
+ * Calls the .power_off() ovl_adaptor component callback if it is present.
+ */
+static inline void power_off(struct device *dev, unsigned int num)
+{
+ int i;
+ struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+ if (num > OVL_ADAPTOR_ID_MAX)
+ num = OVL_ADAPTOR_ID_MAX;
+
+ for (i = num - 1; i >= 0; i--) {
+ if (!ovl_adaptor->ovl_adaptor_comp[i] ||
+ !comp_matches[i].funcs->power_off)
+ continue;
+
+ comp_matches[i].funcs->power_off(ovl_adaptor->ovl_adaptor_comp[i]);
+ }
+}
+
+/**
+ * mtk_ovl_adaptor_power_on - Power on the devices in OVL adaptor
+ * @dev: Device to be powered on
+ *
+ * Different from OVL, OVL adaptor is a pseudo device so
+ * we didn't define it in the device tree, pm_runtime_resume_and_get()
+ * called by .atomic_enable() power on no device in OVL adaptor,
+ * we have to implement a function to do the job instead.
+ *
+ * Return: Zero for success or negative number for failure.
+ */
+int mtk_ovl_adaptor_power_on(struct device *dev)
+{
+ int i, ret;
+ struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+ for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+ if (!ovl_adaptor->ovl_adaptor_comp[i] ||
+ !comp_matches[i].funcs->power_on)
+ continue;
+
+ ret = comp_matches[i].funcs->power_on(ovl_adaptor->ovl_adaptor_comp[i]);
+ if (ret < 0) {
+ dev_err(ovl_adaptor->ovl_adaptor_comp[i],
+ "Failed to power on: %d\n", ret);
+ power_off(dev, i);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+void mtk_ovl_adaptor_power_off(struct device *dev)
+{
+ power_off(dev, OVL_ADAPTOR_ID_MAX);
+}
+
int mtk_ovl_adaptor_clk_enable(struct device *dev)
{
int i;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index a0b2ba3cbcdb..c7edd80be428 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -6,7 +6,6 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/mailbox_controller.h>
-#include <linux/pm_runtime.h>
#include <linux/soc/mediatek/mtk-cmdq.h>
#include <linux/soc/mediatek/mtk-mmsys.h>
#include <linux/soc/mediatek/mtk-mutex.h>
@@ -362,22 +361,16 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc, struct drm_atomic
drm_connector_list_iter_end(&conn_iter);
}
- ret = pm_runtime_resume_and_get(crtc->dev->dev);
- if (ret < 0) {
- DRM_ERROR("Failed to enable power domain: %d\n", ret);
- return ret;
- }
-
ret = mtk_mutex_prepare(mtk_crtc->mutex);
if (ret < 0) {
DRM_ERROR("Failed to enable mutex clock: %d\n", ret);
- goto err_pm_runtime_put;
+ goto error;
}
ret = mtk_crtc_ddp_clk_enable(mtk_crtc);
if (ret < 0) {
DRM_ERROR("Failed to enable component clocks: %d\n", ret);
- goto err_mutex_unprepare;
+ goto error;
}
for (i = 0; i < mtk_crtc->ddp_comp_nr - 1; i++) {
@@ -426,16 +419,13 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc, struct drm_atomic
return 0;
-err_mutex_unprepare:
+error:
mtk_mutex_unprepare(mtk_crtc->mutex);
-err_pm_runtime_put:
- pm_runtime_put(crtc->dev->dev);
return ret;
}
static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
{
- struct drm_device *drm = mtk_crtc->base.dev;
struct drm_crtc *crtc = &mtk_crtc->base;
int i;
@@ -465,8 +455,6 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
mtk_crtc_ddp_clk_disable(mtk_crtc);
mtk_mutex_unprepare(mtk_crtc->mutex);
- pm_runtime_put(drm->dev);
-
if (crtc->state->event && !crtc->state->active) {
spin_lock_irq(&crtc->dev->event_lock);
drm_crtc_send_vblank_event(crtc, crtc->state->event);
@@ -774,7 +762,7 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
return;
}
- ret = pm_runtime_resume_and_get(comp->dev);
+ ret = mtk_ddp_comp_power_on(comp);
if (ret < 0) {
DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n", ret);
return;
@@ -782,7 +770,7 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
ret = mtk_crtc_ddp_hw_init(mtk_crtc, state);
if (ret) {
- pm_runtime_put(comp->dev);
+ mtk_ddp_comp_power_off(comp);
return;
}
@@ -795,7 +783,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
- int i, ret;
+ int i;
DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
if (!mtk_crtc->enabled)
@@ -825,9 +813,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
mtk_crtc_ddp_hw_fini(mtk_crtc);
- ret = pm_runtime_put(comp->dev);
- if (ret < 0)
- DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n", ret);
+ mtk_ddp_comp_power_off(comp);
mtk_crtc->enabled = false;
}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 10402e07a4a7..9940909c7435 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -396,6 +396,8 @@ static const struct mtk_ddp_comp_funcs ddp_ufoe = {
};
static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = {
+ .power_on = mtk_ovl_adaptor_power_on,
+ .power_off = mtk_ovl_adaptor_power_off,
.clk_enable = mtk_ovl_adaptor_clk_enable,
.clk_disable = mtk_ovl_adaptor_clk_disable,
.config = mtk_ovl_adaptor_config,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 1c1d670cfe41..2597dd7ac0d2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -7,6 +7,7 @@
#define MTK_DRM_DDP_COMP_H
#include <linux/io.h>
+#include <linux/pm_runtime.h>
#include <linux/soc/mediatek/mtk-cmdq.h>
#include <linux/soc/mediatek/mtk-mmsys.h>
#include <linux/soc/mediatek/mtk-mutex.h>
@@ -46,6 +47,8 @@ enum mtk_ddp_comp_type {
struct mtk_ddp_comp;
struct cmdq_pkt;
struct mtk_ddp_comp_funcs {
+ int (*power_on)(struct device *dev);
+ void (*power_off)(struct device *dev);
int (*clk_enable)(struct device *dev);
void (*clk_disable)(struct device *dev);
void (*config)(struct device *dev, unsigned int w,
@@ -91,6 +94,23 @@ struct mtk_ddp_comp {
int encoder_index;
};
+static inline int mtk_ddp_comp_power_on(struct mtk_ddp_comp *comp)
+{
+ if (comp->funcs && comp->funcs->power_on)
+ return comp->funcs->power_on(comp->dev);
+ else
+ return pm_runtime_resume_and_get(comp->dev);
+ return 0;
+}
+
+static inline void mtk_ddp_comp_power_off(struct mtk_ddp_comp *comp)
+{
+ if (comp->funcs && comp->funcs->power_off)
+ comp->funcs->power_off(comp->dev);
+ else
+ pm_runtime_put(comp->dev);
+}
+
static inline int mtk_ddp_comp_clk_enable(struct mtk_ddp_comp *comp)
{
if (comp->funcs && comp->funcs->clk_enable)
diff --git a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
index cb36a961786f..8feeb6dce217 100644
--- a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
@@ -243,6 +243,22 @@ size_t mtk_mdp_rdma_get_num_formats(struct device *dev)
return ARRAY_SIZE(formats);
}
+int mtk_mdp_rdma_power_on(struct device *dev)
+{
+ int ret = pm_runtime_resume_and_get(dev);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to power on: %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+void mtk_mdp_rdma_power_off(struct device *dev)
+{
+ pm_runtime_put(dev);
+}
+
int mtk_mdp_rdma_clk_enable(struct device *dev)
{
struct mtk_mdp_rdma *rdma = dev_get_drvdata(dev);
--
2.18.0
next prev parent reply other threads:[~2023-10-18 4:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 4:36 [PATCH v9 00/23] Add display driver for MT8188 VDOSYS1 Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 01/23] dt-bindings: display: mediatek: ethdr: Add compatible for MT8188 Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 02/23] dt-bindings: display: mediatek: mdp-rdma: " Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 03/23] dt-bindings: display: mediatek: merge: " Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 04/23] dt-bindings: display: mediatek: padding: Add MT8188 Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 05/23] dt-bindings: arm: mediatek: Add compatible for MT8188 Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 06/23] dt-bindings: reset: mt8188: Add VDOSYS reset control bits Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 07/23] soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 08/23] soc: mediatek: Support MT8188 VDOSYS1 Padding " Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 09/23] soc: mediatek: Support reset bit mapping in mmsys driver Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 10/23] soc: mediatek: Add MT8188 VDOSYS reset bit map Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 11/23] drm/mediatek: Rename OVL_ADAPTOR_TYPE_RDMA Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 12/23] drm/mediatek: Refine device table of OVL adaptor Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 13/23] drm/mediatek: Sort OVL adaptor components Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 14/23] drm/mediatek: Add component ID to component match structure Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 15/23] drm/mediatek: Manage component's clock with function pointers Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 16/23] drm/mediatek: Start/Stop components " Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 17/23] drm/mediatek: Support MT8188 Padding in display driver Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 18/23] drm/mediatek: Add Padding to OVL adaptor Hsiao Chien Sung
2023-10-18 8:05 ` AngeloGioacchino Del Regno
2023-10-18 4:36 ` [PATCH v9 19/23] drm/mediatek: Return error if MDP RDMA failed to enable the clock Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 20/23] drm/mediatek: Remove the redundant driver data for DPI Hsiao Chien Sung
2023-10-18 4:36 ` [PATCH v9 21/23] drm/mediatek: Fix underrun in VDO1 when switches off the layer Hsiao Chien Sung
2023-10-18 4:36 ` Hsiao Chien Sung [this message]
2023-10-18 8:06 ` [PATCH v9 22/23] drm/mediatek: Power on devices in OVL adaptor when atomic enable AngeloGioacchino Del Regno
2023-10-18 4:36 ` [PATCH v9 23/23] drm/mediatek: Support MT8188 VDOSYS1 in display driver Hsiao Chien Sung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018043650.22532-23-shawn.sung@mediatek.com \
--to=shawn.sung@mediatek.com \
--cc=airlied@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fshao@chromium.org \
--cc=jason-jh.lin@mediatek.com \
--cc=johnson.wang@mediatek.corp-partner.google.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=moudy.ho@mediatek.com \
--cc=nancy.lin@mediatek.com \
--cc=nathan.lu@mediatek.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®