From: Victor Shih <victorshihgli@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw,
Greg.tu@genesyslogic.com.tw, SeanHY.Chen@genesyslogic.com.tw,
kai.heng.feng@canonical.com,
Victor Shih <victorshihgli@gmail.com>,
Victor Shih <victor.shih@genesyslogic.com.tw>
Subject: [PATCH V2] mmc: sdhci-pci-gli: GL975[05]: Mask the replay timer timeout of AER
Date: Wed, 18 Oct 2023 18:33:37 +0800 [thread overview]
Message-ID: <20231018103337.34622-1-victorshihgli@gmail.com> (raw)
From: Victor Shih <victor.shih@genesyslogic.com.tw>
Due to a flaw in the hardware design, the GL975x replay timer frequently
times out when ASPM is enabled. As a result, the warning messages that will
often appear in the system log when the system accesses the GL975x
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
Updates in V2:
- Modify the commit message.
---
drivers/mmc/host/sdhci-pci-gli.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index d83261e857a5..d8a991b349a8 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -28,6 +28,9 @@
#define PCI_GLI_9750_PM_CTRL 0xFC
#define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
+#define PCI_GLI_9750_CORRERR_MASK 0x214
+#define PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
+
#define SDHCI_GLI_9750_CFG2 0x848
#define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
#define GLI_9750_CFG2_L1DLY_VALUE 0x1F
@@ -152,6 +155,9 @@
#define PCI_GLI_9755_PM_CTRL 0xFC
#define PCI_GLI_9755_PM_STATE GENMASK(1, 0)
+#define PCI_GLI_9755_CORRERR_MASK 0x214
+#define PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
+
#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
@@ -561,6 +567,11 @@ static void gl9750_hw_setting(struct sdhci_host *host)
value &= ~PCI_GLI_9750_PM_STATE;
pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
+ /* mask the replay timer timeout of AER */
+ pci_read_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, &value);
+ value |= PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
+ pci_write_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, value);
+
gl9750_wt_off(host);
}
@@ -770,6 +781,11 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
value &= ~PCI_GLI_9755_PM_STATE;
pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
+ /* mask the replay timer timeout of AER */
+ pci_read_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, &value);
+ value |= PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
+ pci_write_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, value);
+
gl9755_wt_off(pdev);
}
--
2.25.1
next reply other threads:[~2023-10-18 10:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 10:33 Victor Shih [this message]
2023-11-03 10:13 ` Victor Shih
2023-11-03 10:28 ` Ulf Hansson
2023-11-06 8:55 ` Victor Shih
2023-11-06 14:40 ` Ulf Hansson
2023-11-06 9:29 ` Adrian Hunter
2023-11-06 12:45 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018103337.34622-1-victorshihgli@gmail.com \
--to=victorshihgli@gmail.com \
--cc=Greg.tu@genesyslogic.com.tw \
--cc=HL.Liu@genesyslogic.com.tw \
--cc=SeanHY.Chen@genesyslogic.com.tw \
--cc=adrian.hunter@intel.com \
--cc=benchuanggli@gmail.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=victor.shih@genesyslogic.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®