From: Kees Cook <keescook@chromium.org>
To: Alison Schofield <alison.schofield@intel.com>
Cc: Justin Stitt <justinstitt@google.com>,
Dan Williams <dan.j.williams@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Dave Jiang <dave.jiang@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
nvdimm@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-hardening@vger.kernel.org
Subject: Re: [PATCH] block: replace deprecated strncpy with strscpy
Date: Wed, 18 Oct 2023 21:32:50 -0700 [thread overview]
Message-ID: <202310182101.8C98652A5C@keescook> (raw)
In-Reply-To: <ZTBrSb/h13YzE3Ws@aschofie-mobl2>
On Wed, Oct 18, 2023 at 04:33:29PM -0700, Alison Schofield wrote:
> On Wed, Oct 18, 2023 at 03:39:59PM -0700, Justin Stitt wrote:
> > I have a feeling I may have botched the subject line for this patch.
> > Can anyone confirm if it's good or not?
> >
> > Automated tooling told me that this was the most common patch
> > prefix but it may be caused by large patch series that just
> > happened to touch this file once.
> >
> > Should the subject be: nvdimm/btt: ... ?
> >
> > Judging from [1] I see a few "block" and a few of nvdimm/btt.
>
> Hi Justin,
>
> It should be nvdimm/btt because it only touches btt.c.
>
> Here's the old school way that I use to find prefixes. Maybe you can
> train your automated tooling to do this, and then share it with me ;)
>
> I do:
>
> ~/git/linux/drivers/nvdimm$ git log --pretty=oneline --abbrev-commit btt.c
>
> 3222d8c2a7f8 block: remove ->rw_page
> ba229aa8f249 nvdimm-btt: Use the enum req_op type
> 86947df3a923 block: Change the type of the last .rw_page() argument
> 8b9ab6266204 block: remove blk_cleanup_disk
> 3205190655ea nvdimm-btt: use bvec_kmap_local in btt_rw_integrity
> 322cbb50de71 block: remove genhd.h
>
> And I see a few choices, with 'block' being pretty common.
> I peek in those patches and see that block was used when the patch
> included files in drivers/block AND also in nvdimm/btt.
Yeah, this "look into the patch" step is what was missing from the
tool[1]. I've just tweaked it to weight based on number of files,
and the results are more in line with what I'd expect now. The "top 5"
best guesses are now:
libnvdimm, btt:
nvdimm/btt:
nvdimm-btt:
libnvdimm/btt:
block:
[1] https://github.com/kees/kernel-tools/blob/trunk/helpers/get-prefix
> Use nvdimm/btt for your patch.
>
> A bit more below -
>
> >
> > On Wed, Oct 18, 2023 at 3:35 PM Justin Stitt <justinstitt@google.com> wrote:
> > >
> > > strncpy() is deprecated for use on NUL-terminated destination strings
> > > [1] and as such we should prefer more robust and less ambiguous string
> > > interfaces.
> > >
> > > We expect super->signature to be NUL-terminated based on its usage with
> > > memcpy against a NUL-term'd buffer:
typo memcpy -> memcmp above?
> > > btt_devs.c:
> > > 253 | if (memcmp(super->signature, BTT_SIG, BTT_SIG_LEN) != 0)
> > > btt.h:
> > > 13 | #define BTT_SIG "BTT_ARENA_INFO\0"
1234567890123456
That's a funny way to define a string. :) Now it has two %NULs at the
end. ;) It doesn't need that trailing '\0'
#define BTT_SIG_LEN 16
And then this could be:
#define BTT_SIG_LEN sizeof(BTT_SIG)
But anyway...
> > >
> > > NUL-padding is not required as `super` is already zero-allocated:
> > > btt.c:
> > > 985 | super = kzalloc(sizeof(struct btt_sb), GFP_NOIO);
> > > ... rendering any additional NUL-padding superfluous.
> > >
> > > Considering the above, a suitable replacement is `strscpy` [2] due to
> > > the fact that it guarantees NUL-termination on the destination buffer
> > > without unnecessarily NUL-padding.
> > >
> > > Let's also use the more idiomatic strscpy usage of (dest, src,
> > > sizeof(dest)) instead of (dest, src, XYZ_LEN) for buffers that the
> > > compiler can determine the size of. This more tightly correlates the
> > > destination buffer to the amount of bytes copied.
> > >
> > > Side note, this pattern of memcmp() on two NUL-terminated strings should
> > > really be changed to just a strncmp(), if i'm not mistaken? I see
> > > multiple instances of this pattern in this system.
>
> I'm not following this note about memcmp() usage. Where is that?
>
> > >
> > > Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
> > > Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
> > > Link: https://github.com/KSPP/linux/issues/90
> > > Cc: linux-hardening@vger.kernel.org
> > > Signed-off-by: Justin Stitt <justinstitt@google.com>
> > > ---
> > > Note: build-tested only.
> > >
> > > Found with: $ rg "strncpy\("
>
> How you found it goes in the commit log, not below the line.
>
> > > ---
> > > drivers/nvdimm/btt.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
> > > index d5593b0dc700..9372c36e8f76 100644
> > > --- a/drivers/nvdimm/btt.c
> > > +++ b/drivers/nvdimm/btt.c
> > > @@ -986,7 +986,7 @@ static int btt_arena_write_layout(struct arena_info *arena)
> > > if (!super)
> > > return -ENOMEM;
> > >
> > > - strncpy(super->signature, BTT_SIG, BTT_SIG_LEN);
> > > + strscpy(super->signature, BTT_SIG, sizeof(super->signature));
Yup, this looks right to me.
Reviewed-by: Kees Cook <keescook@chromium.org>
-Kees
--
Kees Cook
next prev parent reply other threads:[~2023-10-19 4:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 22:35 Justin Stitt
2023-10-18 22:39 ` Justin Stitt
2023-10-18 23:33 ` Alison Schofield
2023-10-19 4:32 ` Kees Cook [this message]
2023-10-19 17:59 ` Justin Stitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202310182101.8C98652A5C@keescook \
--to=keescook@chromium.org \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=justinstitt@google.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®