From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 1/1] PCI: Use FIELD_PREP() and remove *_SHIFT defines
Date: Fri, 27 Oct 2023 11:38:11 +0300 [thread overview]
Message-ID: <20231027083811.9200-1-ilpo.jarvinen@linux.intel.com> (raw)
Instead of open-coded masking and shifting with PCI_CONF1_* bitfields,
use GENMASK() and FIELD_PREP(), and then remove the *_SHIFT defines
that are no longer needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/pci.h | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 39a8932dc340..31da9fde8aca 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -2,6 +2,8 @@
#ifndef DRIVERS_PCI_H
#define DRIVERS_PCI_H
+#include <linux/bitfield.h>
+#include <linux/bits.h>
#include <linux/pci.h>
/* Number of possible devfns: 0.0 to 1f.7 inclusive */
@@ -797,19 +799,15 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
* Section 3.2.2.3.2, Figure 3-2, p. 50.
*/
-#define PCI_CONF1_BUS_SHIFT 16 /* Bus number */
-#define PCI_CONF1_DEV_SHIFT 11 /* Device number */
-#define PCI_CONF1_FUNC_SHIFT 8 /* Function number */
-
-#define PCI_CONF1_BUS_MASK 0xff
-#define PCI_CONF1_DEV_MASK 0x1f
-#define PCI_CONF1_FUNC_MASK 0x7
+#define PCI_CONF1_BUS_MASK GENMASK(23, 16)
+#define PCI_CONF1_DEV_MASK GENMASK(15, 11)
+#define PCI_CONF1_FUNC_MASK GENMASK(10, 8)
#define PCI_CONF1_REG_MASK 0xfc /* Limit aligned offset to a maximum of 256B */
#define PCI_CONF1_ENABLE BIT(31)
-#define PCI_CONF1_BUS(x) (((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT)
-#define PCI_CONF1_DEV(x) (((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT)
-#define PCI_CONF1_FUNC(x) (((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT)
+#define PCI_CONF1_BUS(x) FIELD_PREP(PCI_CONF1_BUS_MASK, (x))
+#define PCI_CONF1_DEV(x) FIELD_PREP(PCI_CONF1_DEV_MASK, (x))
+#define PCI_CONF1_FUNC(x) FIELD_PREP(PCI_CONF1_FUNC_MASK, (x))
#define PCI_CONF1_REG(x) ((x) & PCI_CONF1_REG_MASK)
#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
@@ -827,9 +825,8 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
* are used for specifying additional 4 high bits of PCI Express register.
*/
-#define PCI_CONF1_EXT_REG_SHIFT 16
-#define PCI_CONF1_EXT_REG_MASK 0xf00
-#define PCI_CONF1_EXT_REG(x) (((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT)
+#define PCI_CONF1_EXT_REG_MASK GENMASK(27, 24)
+#define PCI_CONF1_EXT_REG(x) FIELD_PREP(PCI_CONF1_EXT_REG_MASK, (x) >> 8)
#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
--
2.30.2
next reply other threads:[~2023-10-27 8:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-27 8:38 Ilpo Järvinen [this message]
2023-10-31 20:03 ` Bjorn Helgaas
2023-11-03 13:10 ` Ilpo Järvinen
2023-11-03 14:07 ` Ilpo Järvinen
2023-11-03 15:51 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231027083811.9200-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®