From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 1/1] x86/PCI: Clean up open-coded return code mangling
Date: Fri, 27 Oct 2023 12:31:58 +0300 [thread overview]
Message-ID: <20231027093158.19171-1-ilpo.jarvinen@linux.intel.com> (raw)
PCI BIOS gives a return code in 8 bits of eax register which is
extracted by open-coded masks and shifting.
Name the return code bits with a define and introduce
pcibios_get_return_code() helper to extract the return code to improve
code readability. In addition, replace a zero test with
PCIBIOS_SUCCESSFUL.
No function changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
v2:
- Improve changelog
- Add helper to avoid repeating FIELD_GET()
- Reuse existing ret variable in pcibios_get_irq_routing_table()
arch/x86/pci/pcbios.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 4f15280732ed..01c94ac2fb70 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -3,6 +3,8 @@
* BIOS32 and PCI BIOS handling.
*/
+#include <linux/bits.h>
+#include <linux/bitfield.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -29,8 +31,19 @@
#define PCIBIOS_HW_TYPE1_SPEC 0x10
#define PCIBIOS_HW_TYPE2_SPEC 0x20
+/*
+ * Returned in EAX:
+ * - AH: return code
+ */
+#define PCIBIOS_RETURN_CODE GENMASK(15, 8)
+
int pcibios_enabled;
+static u8 pcibios_get_return_code(u32 eax)
+{
+ return FIELD_GET(PCIBIOS_RETURN_CODE, eax);
+}
+
/* According to the BIOS specification at:
* http://members.datafast.net.au/dft0802/specs/bios21.pdf, we could
* restrict the x zone to some pages and make it ro. But this may be
@@ -154,7 +167,7 @@ static int __init check_pcibios(void)
: "memory");
local_irq_restore(flags);
- status = (eax >> 8) & 0xff;
+ status = pcibios_get_return_code(eax);
hw_mech = eax & 0xff;
major_ver = (ebx >> 8) & 0xff;
minor_ver = ebx & 0xff;
@@ -227,7 +240,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return pcibios_get_return_code(result);
}
static int pci_bios_write(unsigned int seg, unsigned int bus,
@@ -269,7 +282,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return pcibios_get_return_code(result);
}
@@ -385,8 +398,9 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
"m" (opt)
: "memory");
DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
- if (ret & 0xff00)
- printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+ ret = pcibios_get_return_code(ret);
+ if (ret)
+ printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", ret);
else if (opt.size) {
rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
if (rt) {
@@ -415,7 +429,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
"b" ((dev->bus->number << 8) | dev->devfn),
"c" ((irq << 8) | (pin + 10)),
"S" (&pci_indirect));
- return !(ret & 0xff00);
+ return pcibios_get_return_code(ret) == PCIBIOS_SUCCESSFUL;
}
EXPORT_SYMBOL(pcibios_set_irq_routing);
--
2.30.2
next reply other threads:[~2023-10-27 9:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-27 9:31 Ilpo Järvinen [this message]
2023-12-01 21:06 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231027093158.19171-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®