From: Artur Weber <aweber.kernel@gmail.com>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: Stanislav Jakubek <stano.jakubek@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Artur Weber <aweber.kernel@gmail.com>
Subject: [PATCH v2 2/6] dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054
Date: Mon, 30 Oct 2023 20:41:44 +0100 [thread overview]
Message-ID: <20231030-bcm59054-v2-2-5fa4011aa5ba@gmail.com> (raw)
In-Reply-To: <20231030-bcm59054-v2-0-5fa4011aa5ba@gmail.com>
The BCM59054 MFD is fairly similar to the BCM59056, and will use
the same driver. Add compatible and specify the allowed regulator
nodes.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
.../devicetree/bindings/mfd/brcm,bcm59056.yaml | 125 +++++++++++++++------
1 file changed, 88 insertions(+), 37 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
index 6d6acc9fd312..5b5044867eca 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
@@ -12,6 +12,7 @@ maintainers:
properties:
compatible:
enum:
+ - "brcm,bcm59054"
- "brcm,bcm59056"
reg:
@@ -24,43 +25,93 @@ properties:
type: object
description: Container node for regulators.
- # The valid regulator node names for BCM59056 are:
- # rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
- # mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
- # csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
- # gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
- # vbus
- patternProperties:
- "^(cam|sim|mmc)ldo[1-2]$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- "^(rf|sd|sdx|aud|mic|usb|vib)ldo$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- "^(c|m|v)sr$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- "^(io|sd)sr[1-2]$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- "^gpldo[1-6]$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- properties:
- "vbus":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: "brcm,bcm59056"
+ then:
+ properties:
+ regulators:
+ # The valid regulator node names for BCM59056 are:
+ # rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+ # mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+ # csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+ # gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+ # vbus
+ patternProperties:
+ "^(cam|sim|mmc)ldo[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(rf|sd|sdx|aud|mic|usb|vib)ldo$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(c|m|v)sr$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(io|sd)sr[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^gpldo[1-6]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ "vbus":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ additionalProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: "brcm,bcm59054"
+ then:
+ properties:
+ regulators:
+ # The valid regulator node names for BCM59054 are:
+ # rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+ # mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+ # csr, iosr1, iosr2, mmsr, sdsr1, sdsr2, vsr,
+ # gpldo1, gpldo2, gpldo3, tcxldo, lvldo1, lvldo2
+ patternProperties:
+ "^(cam|sim|mmc)ldo[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(rf|sd|sdx|aud|mic|usb|vib|tcx)ldo$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(c|mm|v)sr$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^(io|sd)sr[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^gpldo[1-3]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ "^lvldo[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ "vbus":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ additionalProperties: false
required:
- compatible
--
2.42.0
next prev parent reply other threads:[~2023-10-30 19:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-30 19:41 [PATCH v2 0/6] mfd: bcm590xx: Add support " Artur Weber
2023-10-30 19:41 ` [PATCH v2 1/6] dt-bindings: mfd: brcm,bcm59056: Convert to YAML Artur Weber
2023-10-31 14:31 ` Krzysztof Kozlowski
2023-10-30 19:41 ` Artur Weber [this message]
2023-10-31 14:32 ` [PATCH v2 2/6] dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054 Krzysztof Kozlowski
2023-10-30 19:41 ` [PATCH v2 3/6] ARM: dts: Drop DTS for BCM59056 PMIC Artur Weber
2023-10-30 19:41 ` [PATCH v2 4/6] mfd: bcm590xx: Add compatible for BCM59054 Artur Weber
2023-10-30 19:41 ` [PATCH v2 5/6] regulator: bcm590xx: Add support " Artur Weber
2023-10-31 12:41 ` Mark Brown
2023-10-30 19:41 ` [PATCH v2 6/6] regulator: bcm590xx: Add proper handling for PMMODE registers Artur Weber
2023-10-31 12:53 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231030-bcm59054-v2-2-5fa4011aa5ba@gmail.com \
--to=aweber.kernel@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=stano.jakubek@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®