[PATCH 1/1] ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging

[Sakari Ailus <sakari.ailus@linux.intel.com>]

MIPI DisCo for Imaging defines properties for camera sensors that
functionally align with DT equivalents. Replicate the values of these
properties so no-one else needs to know about these property names.

Properties replicated are:

	"mipi-img-clock-frequency" -> "clock-frequency"
	"mipi-img-led-max-current" -> "led-max-microamp"
	"mipi-img-flash-max-current" -> "flash-max-microamp"
	"mipi-img-flash-max-timeout" -> "flash-max-timeout-us"

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
Hi Rafael,

Could you include this patch in the set? Then I think it's fairly
complete on ACPI framework side.

 drivers/acpi/mipi-di.c  | 21 +++++++++++++++++++++
 include/acpi/acpi_bus.h |  4 ++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/acpi/mipi-di.c b/drivers/acpi/mipi-di.c
index 13ed09216c37..de8988657e96 100644
--- a/drivers/acpi/mipi-di.c
+++ b/drivers/acpi/mipi-di.c
@@ -591,6 +591,7 @@ static void init_crs_csi2_swnodes(struct crs_csi2 *csi2)
 	struct acpi_device *adev;
 	acpi_status status;
 	unsigned int i;
+	u32 val;
 	int ret;
 
 	/*
@@ -622,6 +623,26 @@ static void init_crs_csi2_swnodes(struct crs_csi2 *csi2)
 		}
 	}
 
+	if (!fwnode_property_read_u32(adev_fwnode, "mipi-img-clock-frequency", &val)) {
+		swnodes->dev_props[NEXT_PROPERTY(prop_index, DEV_CLOCK_FREQUENCY)] =
+			PROPERTY_ENTRY_U32("clock-frequency", val);
+	}
+
+	if (!fwnode_property_read_u32(adev_fwnode, "mipi-img-led-max-current", &val)) {
+		swnodes->dev_props[NEXT_PROPERTY(prop_index, DEV_LED_MAX_MICROAMP)] =
+			PROPERTY_ENTRY_U32("led-max-microamp", val);
+	}
+
+	if (!fwnode_property_read_u32(adev_fwnode, "mipi-img-flash-max-current", &val)) {
+		swnodes->dev_props[NEXT_PROPERTY(prop_index, DEV_FLASH_MAX_MICROAMP)] =
+			PROPERTY_ENTRY_U32("flash-max-microamp", val);
+	}
+
+	if (!fwnode_property_read_u32(adev_fwnode, "mipi-img-flash-max-timeout-us", &val)) {
+		swnodes->dev_props[NEXT_PROPERTY(prop_index, DEV_FLASH_MAX_TIMEOUT_US)] =
+			PROPERTY_ENTRY_U32("flash-max-timeout-us", val);
+	}
+
 	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 	if (ACPI_FAILURE(status)) {
 		acpi_handle_info(handle, "Unable to get the path name\n");
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index d92799889512..85a27081cced 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -371,6 +371,10 @@ struct acpi_gpio_mapping;
 
 enum acpi_device_swnode_dev_props {
 	ACPI_DEVICE_SWNODE_DEV_ROTATION,
+	ACPI_DEVICE_SWNODE_DEV_CLOCK_FREQUENCY,
+	ACPI_DEVICE_SWNODE_DEV_LED_MAX_MICROAMP,
+	ACPI_DEVICE_SWNODE_DEV_FLASH_MAX_MICROAMP,
+	ACPI_DEVICE_SWNODE_DEV_FLASH_MAX_TIMEOUT_US,
 	ACPI_DEVICE_SWNODE_DEV_NUM_OF,
 	ACPI_DEVICE_SWNODE_DEV_NUM_ENTRIES
 };
-- 
2.39.2