[PATCH 6/7] ARM: dts: qcom: apq8026-samsung-milletwifi: Enable Wi-Fi and Bluetooth

[Bryant Mairs <bryant@mai.rs>]

Enable Wi-Fi and Bluetooth support for milletwifi. This device
uses the WCN3660A that is already supported, so it only needs to be
enabled in the DTS.

Signed-off-by: Bryant Mairs <bryant@mai.rs>
---
 .../qcom/qcom-apq8026-samsung-milletwifi.dts  | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
index 910e8d2f69b0..57f50af487c1 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -310,6 +310,28 @@ touchscreen@48 {
 	};
 };
 
+&pronto {
+	vddmx-supply = <&pm8226_l3>;
+	vddpx-supply = <&pm8226_l6>;
+
+	pinctrl-0 = <&wcnss_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8226_l10>;
+		vddrfa-supply = <&pm8226_l24>;
+		vddpa-supply = <&pm8226_l16>;
+		vdddig-supply = <&pm8226_l24>;
+	};
+
+	smd-edge {
+		wcnss {
+			status = "okay";
+		};
+	};
+};
 
 &rpm_requests {
 	regulators {
@@ -557,6 +579,13 @@ tsp_int_rst_default_state: tsp-int-rst-default-state {
 		drive-strength = <10>;
 		bias-pull-up;
 	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		pins =  "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+		function = "wlan";
+		drive-strength = <6>;
+		bias-pull-down;
+	};
 };
 
 &usb {
-- 
2.41.0