From: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
To: <michal.simek@amd.com>, <gregkh@linuxfoundation.org>,
<tanmay.shah@amd.com>, <mathieu.poirier@linaro.org>,
<nava.kishore.manne@amd.com>, <ben.levinsky@amd.com>,
<sai.krishna.potthuri@amd.com>, <marex@denx.de>,
<robh@kernel.org>, <ruanjinjie@huawei.com>, <arnd@arndb.de>,
<shubhrajyoti.datta@amd.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Jay Buddhabhatti <jay.buddhabhatti@amd.com>,
Saeed Nowshadi <saeed.nowshadi@amd.com>
Subject: [PATCH v4 2/5] firmware: xilinx: Expand feature check to support all PLM modules
Date: Wed, 8 Nov 2023 23:00:18 -0800 [thread overview]
Message-ID: <20231109070021.16291-3-jay.buddhabhatti@amd.com> (raw)
In-Reply-To: <20231109070021.16291-1-jay.buddhabhatti@amd.com>
To support feature check for all modules, append the module id of the API
that is being checked to the feature check API so it could be routed to
the target module for processing.
There is no need to check compatible string because the board information
is taken via firmware interface.
Co-developed-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
---
drivers/firmware/xilinx/zynqmp.c | 41 ++++++++++++++++------------
include/linux/firmware/xlnx-zynqmp.h | 11 ++++++++
2 files changed, 35 insertions(+), 17 deletions(-)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7cf056451a26..c1c1abe9c4e5 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -199,9 +199,29 @@ static int __do_feature_check_call(const u32 api_id, u32 *ret_payload)
{
int ret;
u64 smc_arg[2];
+ u32 module_id;
+ u32 feature_check_api_id;
- smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
- smc_arg[1] = api_id;
+ module_id = FIELD_GET(MODULE_ID_MASK, api_id);
+
+ /*
+ * Feature check of APIs belonging to PM, XSEM, and TF-A are handled by calling
+ * PM_FEATURE_CHECK API. For other modules, call PM_API_FEATURES API.
+ */
+ if (module_id == PM_MODULE_ID || module_id == XSEM_MODULE_ID || module_id == TF_A_MODULE_ID)
+ feature_check_api_id = PM_FEATURE_CHECK;
+ else
+ feature_check_api_id = PM_API_FEATURES;
+
+ /*
+ * Feature check of TF-A APIs is done in the TF-A layer and it expects for
+ * MODULE_ID_MASK bits of SMC's arg[0] to be the same as PM_MODULE_ID.
+ */
+ if (module_id == TF_A_MODULE_ID)
+ module_id = PM_MODULE_ID;
+
+ smc_arg[0] = PM_SIP_SVC | FIELD_PREP(MODULE_ID_MASK, module_id) | feature_check_api_id;
+ smc_arg[1] = (api_id & API_ID_MASK);
ret = do_fw_call(ret_payload, 2, smc_arg[0], smc_arg[1]);
if (ret)
@@ -1904,22 +1924,9 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
if (ret)
return ret;
- np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
- if (!np) {
- np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
- if (!np)
- return 0;
-
+ ret = do_feature_check_call(PM_FEATURE_CHECK);
+ if (ret >= 0 && ((ret & FIRMWARE_VERSION_MASK) >= PM_API_VERSION_1))
feature_check_enabled = true;
- }
-
- if (!feature_check_enabled) {
- ret = do_feature_check_call(PM_FEATURE_CHECK);
- if (ret >= 0)
- feature_check_enabled = true;
- }
-
- of_node_put(np);
devinfo = devm_kzalloc(dev, sizeof(*devinfo), GFP_KERNEL);
if (!devinfo)
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 9e923e55f5d1..96f3d949afd8 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -32,6 +32,7 @@
#define PM_SIP_SVC 0xC2000000
/* PM API versions */
+#define PM_API_VERSION_1 1
#define PM_API_VERSION_2 2
#define PM_PINCTRL_PARAM_SET_VERSION 2
@@ -47,6 +48,9 @@
#define FAMILY_CODE_MASK GENMASK(27, 21)
#define SUB_FAMILY_CODE_MASK GENMASK(20, 19)
+#define API_ID_MASK GENMASK(7, 0)
+#define MODULE_ID_MASK GENMASK(11, 8)
+
/* ATF only commands */
#define TF_A_PM_REGISTER_SGI 0xa04
#define PM_GET_TRUSTZONE_VERSION 0xa03
@@ -112,6 +116,12 @@
#define XPM_EVENT_ERROR_MASK_NOC_NCR BIT(13)
#define XPM_EVENT_ERROR_MASK_NOC_CR BIT(12)
+enum pm_module_id {
+ PM_MODULE_ID = 0x0,
+ XSEM_MODULE_ID = 0x3,
+ TF_A_MODULE_ID = 0xa,
+};
+
enum pm_api_cb_id {
PM_INIT_SUSPEND_CB = 30,
PM_ACKNOWLEDGE_CB = 31,
@@ -119,6 +129,7 @@ enum pm_api_cb_id {
};
enum pm_api_id {
+ PM_API_FEATURES = 0,
PM_GET_API_VERSION = 1,
PM_REGISTER_NOTIFIER = 5,
PM_FORCE_POWERDOWN = 8,
--
2.17.1
next prev parent reply other threads:[~2023-11-09 7:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-09 7:00 [PATCH v4 0/5] update for versal net platform Jay Buddhabhatti
2023-11-09 7:00 ` [PATCH v4 1/5] firmware: xilinx: Update firmware call interface to support additional args Jay Buddhabhatti
2023-11-11 6:47 ` kernel test robot
2023-11-14 20:00 ` Nathan Chancellor
2023-11-09 7:00 ` Jay Buddhabhatti [this message]
2023-11-09 7:00 ` [PATCH v4 3/5] firmware: xilinx: Register event manager driver Jay Buddhabhatti
2023-11-09 7:00 ` [PATCH v4 4/5] drivers: soc: xilinx: Fix error message on SGI registration failure Jay Buddhabhatti
2023-11-09 7:00 ` [PATCH v4 5/5] firmware: zynqmp: Add support to handle IPI CRC failure Jay Buddhabhatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231109070021.16291-3-jay.buddhabhatti@amd.com \
--to=jay.buddhabhatti@amd.com \
--cc=arnd@arndb.de \
--cc=ben.levinsky@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=mathieu.poirier@linaro.org \
--cc=michal.simek@amd.com \
--cc=nava.kishore.manne@amd.com \
--cc=robh@kernel.org \
--cc=ruanjinjie@huawei.com \
--cc=saeed.nowshadi@amd.com \
--cc=sai.krishna.potthuri@amd.com \
--cc=shubhrajyoti.datta@amd.com \
--cc=tanmay.shah@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®