mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
To: Ard Biesheuvel <ardb@kernel.org>,
	Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lukas Bulwahn <lukas.bulwahn@gmail.com>
Subject: [PATCH] lib/xz: remove IA-64 support from library
Date: Mon, 13 Nov 2023 13:55:22 +0100	[thread overview]
Message-ID: <20231113125522.8943-1-lukas.bulwahn@gmail.com> (raw)

Among many removals, commit cf8e8658100d ("arch: Remove Itanium (IA-64)
architecture") removes the config XZ_DEC_IA64, but does not remove the code
for IA64 architecture support in lib/xz/.

Remove the definitions XZ_DEC_IA64, bcj_ia64(), BCJ_IA64 and all its
references.

Note that in the ifdef expression for architectures to enable the generic
support for BCJ encoders, XZ_DEC_ARM was listed twice, so drop this
duplicated conditional while removing XZ_DEC_IA64 from the condition.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 lib/xz/xz_dec_bcj.c | 94 ---------------------------------------------
 lib/xz/xz_private.h |  4 --
 2 files changed, 98 deletions(-)

diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c
index ef449e97d1a1..3c8e7135b0e4 100644
--- a/lib/xz/xz_dec_bcj.c
+++ b/lib/xz/xz_dec_bcj.c
@@ -21,7 +21,6 @@ struct xz_dec_bcj {
 	enum {
 		BCJ_X86 = 4,        /* x86 or x86-64 */
 		BCJ_POWERPC = 5,    /* Big endian only */
-		BCJ_IA64 = 6,       /* Big or little endian */
 		BCJ_ARM = 7,        /* Little endian only */
 		BCJ_ARMTHUMB = 8,   /* Little endian only */
 		BCJ_SPARC = 9       /* Big or little endian */
@@ -66,7 +65,6 @@ struct xz_dec_bcj {
 		 * Type         Alignment   Look-ahead
 		 * x86              1           4
 		 * PowerPC          4           0
-		 * IA-64           16           0
 		 * ARM              4           0
 		 * ARM-Thumb        2           2
 		 * SPARC            4           0
@@ -177,90 +175,6 @@ static size_t bcj_powerpc(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
 }
 #endif
 
-#ifdef XZ_DEC_IA64
-static size_t bcj_ia64(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
-{
-	static const uint8_t branch_table[32] = {
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		4, 4, 6, 6, 0, 0, 7, 7,
-		4, 4, 0, 0, 4, 4, 0, 0
-	};
-
-	/*
-	 * The local variables take a little bit stack space, but it's less
-	 * than what LZMA2 decoder takes, so it doesn't make sense to reduce
-	 * stack usage here without doing that for the LZMA2 decoder too.
-	 */
-
-	/* Loop counters */
-	size_t i;
-	size_t j;
-
-	/* Instruction slot (0, 1, or 2) in the 128-bit instruction word */
-	uint32_t slot;
-
-	/* Bitwise offset of the instruction indicated by slot */
-	uint32_t bit_pos;
-
-	/* bit_pos split into byte and bit parts */
-	uint32_t byte_pos;
-	uint32_t bit_res;
-
-	/* Address part of an instruction */
-	uint32_t addr;
-
-	/* Mask used to detect which instructions to convert */
-	uint32_t mask;
-
-	/* 41-bit instruction stored somewhere in the lowest 48 bits */
-	uint64_t instr;
-
-	/* Instruction normalized with bit_res for easier manipulation */
-	uint64_t norm;
-
-	for (i = 0; i + 16 <= size; i += 16) {
-		mask = branch_table[buf[i] & 0x1F];
-		for (slot = 0, bit_pos = 5; slot < 3; ++slot, bit_pos += 41) {
-			if (((mask >> slot) & 1) == 0)
-				continue;
-
-			byte_pos = bit_pos >> 3;
-			bit_res = bit_pos & 7;
-			instr = 0;
-			for (j = 0; j < 6; ++j)
-				instr |= (uint64_t)(buf[i + j + byte_pos])
-						<< (8 * j);
-
-			norm = instr >> bit_res;
-
-			if (((norm >> 37) & 0x0F) == 0x05
-					&& ((norm >> 9) & 0x07) == 0) {
-				addr = (norm >> 13) & 0x0FFFFF;
-				addr |= ((uint32_t)(norm >> 36) & 1) << 20;
-				addr <<= 4;
-				addr -= s->pos + (uint32_t)i;
-				addr >>= 4;
-
-				norm &= ~((uint64_t)0x8FFFFF << 13);
-				norm |= (uint64_t)(addr & 0x0FFFFF) << 13;
-				norm |= (uint64_t)(addr & 0x100000)
-						<< (36 - 20);
-
-				instr &= (1 << bit_res) - 1;
-				instr |= norm << bit_res;
-
-				for (j = 0; j < 6; j++)
-					buf[i + j + byte_pos]
-						= (uint8_t)(instr >> (8 * j));
-			}
-		}
-	}
-
-	return i;
-}
-#endif
-
 #ifdef XZ_DEC_ARM
 static size_t bcj_arm(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
 {
@@ -361,11 +275,6 @@ static void bcj_apply(struct xz_dec_bcj *s,
 		filtered = bcj_powerpc(s, buf, size);
 		break;
 #endif
-#ifdef XZ_DEC_IA64
-	case BCJ_IA64:
-		filtered = bcj_ia64(s, buf, size);
-		break;
-#endif
 #ifdef XZ_DEC_ARM
 	case BCJ_ARM:
 		filtered = bcj_arm(s, buf, size);
@@ -542,9 +451,6 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj *s, uint8_t id)
 #ifdef XZ_DEC_POWERPC
 	case BCJ_POWERPC:
 #endif
-#ifdef XZ_DEC_IA64
-	case BCJ_IA64:
-#endif
 #ifdef XZ_DEC_ARM
 	case BCJ_ARM:
 #endif
diff --git a/lib/xz/xz_private.h b/lib/xz/xz_private.h
index bf1e94ec7873..dd22671c4941 100644
--- a/lib/xz/xz_private.h
+++ b/lib/xz/xz_private.h
@@ -25,9 +25,6 @@
 #		ifdef CONFIG_XZ_DEC_POWERPC
 #			define XZ_DEC_POWERPC
 #		endif
-#		ifdef CONFIG_XZ_DEC_IA64
-#			define XZ_DEC_IA64
-#		endif
 #		ifdef CONFIG_XZ_DEC_ARM
 #			define XZ_DEC_ARM
 #		endif
@@ -98,7 +95,6 @@
  */
 #ifndef XZ_DEC_BCJ
 #	if defined(XZ_DEC_X86) || defined(XZ_DEC_POWERPC) \
-			|| defined(XZ_DEC_IA64) || defined(XZ_DEC_ARM) \
 			|| defined(XZ_DEC_ARM) || defined(XZ_DEC_ARMTHUMB) \
 			|| defined(XZ_DEC_SPARC)
 #		define XZ_DEC_BCJ
-- 
2.17.1


                 reply	other threads:[~2023-11-13 12:55 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231113125522.8943-1-lukas.bulwahn@gmail.com \
    --to=lukas.bulwahn@gmail.com \
    --cc=ardb@kernel.org \
    --cc=hsiangkao@linux.alibaba.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®