From: Jai Luthra <j-luthra@ti.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Aradhya Bhatia <a-bhatia1@ti.com>,
Devarsh Thakkar <devarsht@ti.com>,
Vaishnav Achath <vaishnav.a@ti.com>,
Julien Massot <julien.massot@collabora.com>,
Martyn Welch <martyn.welch@collabora.com>,
Matthias Schiffer <matthias.schiffer@ew.tq-group.com>,
Jai Luthra <j-luthra@ti.com>
Subject: [PATCH v2 0/9] arm64: dts: ti: Enable CSI cameras for AM62 family
Date: Fri, 17 Nov 2023 14:58:08 +0530 [thread overview]
Message-ID: <20231117-csi_dts-v2-0-bf4312194a6b@ti.com> (raw)
This series enables CSI camera support on BeaglePlay, SK-AM62 and
SK-AM62A, now that the dt-bindings and driver support for CSI-RX related
IPs is merged in v6.7-rc1.
Along with the device tree nodes for CSI-RX, add new DT overlays for
different camera modules like RPiv2 (IMX219) or PCam5C (OV5640).
Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
Changes in v2:
- Follow Andrew's comments to avoid creating combined DTBs with overlays
applied, instead adding them with "dtb- +=" to optionally test that
they apply cleanly with OF_ALL_DTBS=y config.
- [New Patch] Cleanup existing combined DTBs to also do the same as above
- Pick Martyn's Tested-By tag for SK-AM62
- Link to v1: https://lore.kernel.org/r/20231115-csi_dts-v1-0-99fc535b2bde@ti.com
---
Jai Luthra (9):
arm64: defconfig: Enable AM62 CSI2RX
arm64: dts: ti: Enable CSI-RX on AM62
arm64: dts: ti: Enable CSI-RX on AM62A
arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640
arm64: dts: ti: k3-am62x-sk: Enable camera peripherals
arm64: dts: ti: k3-am62x: Add overlays for OV5640
arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals
arm64: dts: ti: k3-am62x: Add overlay for IMX219
arm64: dts: ti: Use OF_ALL_DTBS for combined blobs
arch/arm64/boot/dts/ti/Makefile | 60 ++++++++++---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 62 ++++++++++++++
.../dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso | 77 +++++++++++++++++
.../ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso | 77 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 99 ++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 35 ++++++++
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 15 ++++
.../arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 76 +++++++++++++++++
.../arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso | 74 ++++++++++++++++
.../boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso | 74 ++++++++++++++++
arch/arm64/configs/defconfig | 3 +
11 files changed, 640 insertions(+), 12 deletions(-)
---
base-commit: 569293c4ad62826ba18e1e8371ce9667a5529efb
change-id: 20231114-csi_dts-5f433aca3665
Best regards,
--
Jai Luthra <j-luthra@ti.com>
next reply other threads:[~2023-11-17 9:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-17 9:28 Jai Luthra [this message]
2023-11-17 9:28 ` [PATCH v2 1/9] arm64: defconfig: Enable AM62 CSI2RX Jai Luthra
2023-11-17 9:28 ` [PATCH v2 2/9] arm64: dts: ti: Enable CSI-RX on AM62 Jai Luthra
2023-11-17 9:28 ` [PATCH v2 3/9] arm64: dts: ti: Enable CSI-RX on AM62A Jai Luthra
2023-11-17 9:28 ` [PATCH v2 4/9] arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 Jai Luthra
2023-11-20 16:03 ` Andrew Davis
2023-11-17 9:28 ` [PATCH v2 5/9] arm64: dts: ti: k3-am62x-sk: Enable camera peripherals Jai Luthra
2023-11-20 19:32 ` Andrew Davis
2023-11-28 9:06 ` Jai Luthra
2023-11-17 9:28 ` [PATCH v2 6/9] arm64: dts: ti: k3-am62x: Add overlays for OV5640 Jai Luthra
2023-11-17 9:28 ` [PATCH v2 7/9] arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals Jai Luthra
2023-11-17 9:28 ` [PATCH v2 8/9] arm64: dts: ti: k3-am62x: Add overlay for IMX219 Jai Luthra
2023-11-17 9:28 ` [PATCH v2 9/9] arm64: dts: ti: Use OF_ALL_DTBS for combined blobs Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231117-csi_dts-v2-0-bf4312194a6b@ti.com \
--to=j-luthra@ti.com \
--cc=a-bhatia1@ti.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=julien.massot@collabora.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martyn.welch@collabora.com \
--cc=matthias.schiffer@ew.tq-group.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vaishnav.a@ti.com \
--cc=vigneshr@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®