From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>
Subject: [RFC PATCH net-next v2 05/10] net: ethtool: Allow passing a phy index for some commands
Date: Fri, 17 Nov 2023 17:23:16 +0100 [thread overview]
Message-ID: <20231117162323.626979-6-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20231117162323.626979-1-maxime.chevallier@bootlin.com>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
include/uapi/linux/ethtool_netlink.h | 1 +
net/ethtool/netlink.c | 22 ++++++++++++++++++++++
net/ethtool/netlink.h | 8 ++++++--
3 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 73e2c10dc2cc..e557cf35250e 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -133,6 +133,7 @@ enum {
ETHTOOL_A_HEADER_DEV_INDEX, /* u32 */
ETHTOOL_A_HEADER_DEV_NAME, /* string */
ETHTOOL_A_HEADER_FLAGS, /* u32 - ETHTOOL_FLAG_* */
+ ETHTOOL_A_HEADER_PHY_INDEX, /* u32 */
/* add new constants above here */
__ETHTOOL_A_HEADER_CNT,
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index 3bbd5afb7b31..e83ee844b60f 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -4,6 +4,7 @@
#include <linux/ethtool_netlink.h>
#include <linux/pm_runtime.h>
#include "netlink.h"
+#include <linux/link_topology.h>
static struct genl_family ethtool_genl_family;
@@ -20,6 +21,7 @@ const struct nla_policy ethnl_header_policy[] = {
.len = ALTIFNAMSIZ - 1 },
[ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
ETHTOOL_FLAGS_BASIC),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
};
const struct nla_policy ethnl_header_policy_stats[] = {
@@ -28,6 +30,7 @@ const struct nla_policy ethnl_header_policy_stats[] = {
.len = ALTIFNAMSIZ - 1 },
[ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
ETHTOOL_FLAGS_STATS),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
};
int ethnl_ops_begin(struct net_device *dev)
@@ -91,6 +94,7 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
{
struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy)];
const struct nlattr *devname_attr;
+ struct phy_device *phydev = NULL;
struct net_device *dev = NULL;
u32 flags = 0;
int ret;
@@ -145,6 +149,24 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
return -EINVAL;
}
+ if (dev) {
+ if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+ u32 phy_index = nla_get_u32(tb[ETHTOOL_A_HEADER_PHY_INDEX]);
+
+ phydev = link_topo_get_phy(&dev->link_topo, phy_index);
+ if (!phydev) {
+ NL_SET_ERR_MSG_ATTR(extack, header, "no phy matches phy index");
+ return -EINVAL;
+ }
+ } else {
+ /* If we need a PHY but no phy index is specified, fallback
+ * to dev->phydev
+ */
+ phydev = dev->phydev;
+ }
+ }
+
+ req_info->phydev = phydev;
req_info->dev = dev;
req_info->flags = flags;
return 0;
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 9a333a8d04c1..3f5eb60bdf0b 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -250,6 +250,7 @@ static inline unsigned int ethnl_reply_header_size(void)
* @dev: network device the request is for (may be null)
* @dev_tracker: refcount tracker for @dev reference
* @flags: request flags common for all request types
+ * @phydev: phy_device connected to @dev this request is for (may be null)
*
* This is a common base for request specific structures holding data from
* parsed userspace request. These always embed struct ethnl_req_info at
@@ -259,6 +260,7 @@ struct ethnl_req_info {
struct net_device *dev;
netdevice_tracker dev_tracker;
u32 flags;
+ struct phy_device *phydev;
};
static inline void ethnl_parse_header_dev_put(struct ethnl_req_info *req_info)
@@ -395,9 +397,10 @@ extern const struct ethnl_request_ops ethnl_rss_request_ops;
extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
extern const struct ethnl_request_ops ethnl_mm_request_ops;
+extern const struct ethnl_request_ops ethnl_phy_request_ops;
-extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
-extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
+extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_PHY_INDEX + 1];
+extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_PHY_INDEX + 1];
extern const struct nla_policy ethnl_strset_get_policy[ETHTOOL_A_STRSET_COUNTS_ONLY + 1];
extern const struct nla_policy ethnl_linkinfo_get_policy[ETHTOOL_A_LINKINFO_HEADER + 1];
extern const struct nla_policy ethnl_linkinfo_set_policy[ETHTOOL_A_LINKINFO_TP_MDIX_CTRL + 1];
@@ -441,6 +444,7 @@ extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1]
extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1];
extern const struct nla_policy ethnl_mm_get_policy[ETHTOOL_A_MM_HEADER + 1];
extern const struct nla_policy ethnl_mm_set_policy[ETHTOOL_A_MM_MAX + 1];
+extern const struct nla_policy ethnl_phy_get_policy[ETHTOOL_A_PHY_HEADER + 1];
int ethnl_set_features(struct sk_buff *skb, struct genl_info *info);
int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info);
--
2.41.0
next prev parent reply other threads:[~2023-11-17 15:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-17 16:23 [RFC PATCH net-next v2 00/10] Introduce PHY listing and link_topology tracking Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 01/10] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2023-11-21 0:24 ` Andrew Lunn
2023-11-23 13:34 ` Maxime Chevallier
2023-11-23 13:44 ` Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 02/10] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 03/10] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2023-11-21 0:57 ` Andrew Lunn
2023-11-21 10:08 ` Russell King (Oracle)
2023-11-21 14:35 ` Andrew Lunn
2023-11-17 16:23 ` [RFC PATCH net-next v2 04/10] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2023-11-21 1:00 ` Andrew Lunn
2023-11-21 10:20 ` Russell King (Oracle)
2023-11-23 13:35 ` Maxime Chevallier
2023-11-17 16:23 ` Maxime Chevallier [this message]
2023-11-21 1:08 ` [RFC PATCH net-next v2 05/10] net: ethtool: Allow passing a phy index for some commands Andrew Lunn
2023-11-23 13:36 ` Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 06/10] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2023-11-21 1:34 ` Andrew Lunn
2023-11-21 1:40 ` Andrew Lunn
2023-11-23 13:40 ` Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 07/10] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 08/10] net: ethtool: pse-pd: " Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 09/10] net: ethtool: cable-test: " Maxime Chevallier
2023-11-17 16:23 ` [RFC PATCH net-next v2 10/10] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231117162323.626979-6-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=jesse.brandeburg@intel.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®