mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Rokosov <ddrokosov@salutedevices.com>
To: <lee@kernel.org>, <pavel@ucw.cz>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<andy.shevchenko@gmail.com>
Cc: <kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-leds@vger.kernel.org>,
	George Stark <gnstark@salutedevices.com>,
	Dmitry Rokosov <ddrokosov@salutedevices.com>
Subject: [PATCH v5 09/11] leds: aw200xx: add support for aw20108 device
Date: Sat, 25 Nov 2023 23:05:17 +0300	[thread overview]
Message-ID: <20231125200519.1750-10-ddrokosov@salutedevices.com> (raw)
In-Reply-To: <20231125200519.1750-1-ddrokosov@salutedevices.com>

From: George Stark <gnstark@salutedevices.com>

Add support for the Awinic aw20108 device, which belongs to the same LED
drivers family. The new device supports 108 LEDs using a matrix of 12x9
outputs."

Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
---
 drivers/leds/Kconfig        | 14 +++++++++-----
 drivers/leds/leds-aw200xx.c | 10 +++++++++-
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6046dfeca16f..a898a8679334 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -95,14 +95,18 @@ config LEDS_ARIEL
 	  Say Y to if your machine is a Dell Wyse 3020 thin client.
 
 config LEDS_AW200XX
-	tristate "LED support for Awinic AW20036/AW20054/AW20072"
+	tristate "LED support for Awinic AW20036/AW20054/AW20072/AW20108"
 	depends on LEDS_CLASS
 	depends on I2C
 	help
-	  This option enables support for the AW20036/AW20054/AW20072 LED driver.
-	  It is a 3x12/6x9/6x12 matrix LED driver programmed via
-	  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
-	  3 pattern controllers for auto breathing or group dimming control.
+	  This option enables support for the Awinic AW200XX LED controllers.
+	  It is a matrix LED driver programmed via an I2C interface. Devices have
+	  a set of individually controlled LEDs and support 3 pattern controllers
+	  for auto breathing or group dimming control. Supported devices:
+	    - AW20036 (3x12) 36 LEDs
+	    - AW20054 (6x9)  54 LEDs
+	    - AW20072 (6x12) 72 LEDs
+	    - AW20108 (9x12) 108 LEDs
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-aw200xx.
diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
index e125b6c68c23..1d3943f86f7f 100644
--- a/drivers/leds/leds-aw200xx.c
+++ b/drivers/leds/leds-aw200xx.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Awinic AW20036/AW20054/AW20072 LED driver
+ * Awinic AW20036/AW20054/AW20072/AW20108 LED driver
  *
  * Copyright (c) 2023, SberDevices. All Rights Reserved.
  *
@@ -622,10 +622,17 @@ static const struct aw200xx_chipdef aw20072_cdef = {
 	.display_size_columns = 12,
 };
 
+static const struct aw200xx_chipdef aw20108_cdef = {
+	.channels = 108,
+	.display_size_rows_max = 9,
+	.display_size_columns = 12,
+};
+
 static const struct i2c_device_id aw200xx_id[] = {
 	{ "aw20036" },
 	{ "aw20054" },
 	{ "aw20072" },
+	{ "aw20108" },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, aw200xx_id);
@@ -634,6 +641,7 @@ static const struct of_device_id aw200xx_match_table[] = {
 	{ .compatible = "awinic,aw20036", .data = &aw20036_cdef, },
 	{ .compatible = "awinic,aw20054", .data = &aw20054_cdef, },
 	{ .compatible = "awinic,aw20072", .data = &aw20072_cdef, },
+	{ .compatible = "awinic,aw20108", .data = &aw20108_cdef, },
 	{}
 };
 MODULE_DEVICE_TABLE(of, aw200xx_match_table);
-- 
2.36.0


  parent reply	other threads:[~2023-11-25 20:06 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-25 20:05 [PATCH v5 00/11] leds: aw200xx: several driver updates Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 01/11] leds: aw200xx: fix write to DIM parameter Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 02/11] leds: aw200xx: support HWEN hardware control Dmitry Rokosov
2023-11-28 15:46   ` Andy Shevchenko
2023-11-25 20:05 ` [PATCH v5 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 04/11] leds: aw200xx: calculate dts property display_rows in the driver Dmitry Rokosov
2023-11-28 15:47   ` Andy Shevchenko
2023-11-25 20:05 ` [PATCH v5 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows" Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 06/11] leds: aw200xx: add delay after software reset Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 07/11] leds: aw200xx: enable disable_locking flag in regmap config Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 08/11] leds: aw200xx: improve autodim calculation method Dmitry Rokosov
2023-11-25 20:05 ` Dmitry Rokosov [this message]
2023-11-25 20:05 ` [PATCH v5 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device Dmitry Rokosov
2023-11-25 20:05 ` [PATCH v5 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints Dmitry Rokosov
2023-12-01 11:09 ` [PATCH v5 00/11] leds: aw200xx: several driver updates Lee Jones
2023-12-06 11:29   ` Dmitry Rokosov
2023-12-06 13:11     ` Lee Jones
2023-12-06 17:02       ` Dmitry Rokosov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231125200519.1750-10-ddrokosov@salutedevices.com \
    --to=ddrokosov@salutedevices.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gnstark@salutedevices.com \
    --cc=kernel@sberdevices.ru \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=rockosov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®