[PATCH net 2/2] r8169: fix deadlock in "r8169_phylink_handler"

[ChunHao Lin <hau@realtek.com>]

In "r8169_phylink_handler", for rtl8125, it will call "rtl_reset_work"->
"rtl_hw_start"->"rtl_jumbo_config"->"phy_start_aneg". When call
"r8169_phylink_handler", PHY lock is acquired. But "phy_start_aneg"
will also try to acquire PHY lock. That will cause deadlock.

In this path, use "_phy_start_aneg", unlocked version "phy_start_aneg",
to prevent deadlock in "r8169_phylink_handler".

Fixes: 453a77894efa ("r8169: don't advertise pause in jumbo mode")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 473b3245754f..2e3e42a98edd 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -2415,11 +2415,22 @@ static void rtl_jumbo_config(struct rtl8169_private *tp)
 
 	/* Chip doesn't support pause in jumbo mode */
 	if (jumbo) {
+		int lock;
+
 		linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 				   tp->phydev->advertising);
 		linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
 				   tp->phydev->advertising);
-		phy_start_aneg(tp->phydev);
+
+		if (!mutex_trylock(&tp->phydev->lock))
+			lock = 0;
+		else
+			lock = 1;
+
+		_phy_start_aneg(tp->phydev);
+
+		if (lock)
+			mutex_unlock(&tp->phydev->lock);
 	}
 }
 
-- 
2.39.2