From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<linux-kernel@vger.kernel.org>
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Robert Marko" <robert.marko@sartura.hr>,
"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
"Michael Walle" <michael@walle.cc>,
"Rafał Miłecki" <rafal@milecki.pl>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Randy Dunlap" <rdunlap@infradead.org>,
"Chen-Yu Tsai" <wenst@chromium.org>,
"Daniel Golle" <daniel@makrotopia.org>,
"Miquel Raynal" <miquel.raynal@bootlin.com>
Subject: [PATCH v14 8/8] nvmem: core: Expose cells through sysfs
Date: Wed, 29 Nov 2023 17:37:37 +0100 [thread overview]
Message-ID: <20231129163737.698317-9-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20231129163737.698317-1-miquel.raynal@bootlin.com>
The binary content of nvmem devices is available to the user so in the
easiest cases, finding the content of a cell is rather easy as it is
just a matter of looking at a known and fixed offset. However, nvmem
layouts have been recently introduced to cope with more advanced
situations, where the offset and size of the cells is not known in
advance or is dynamic. When using layouts, more advanced parsers are
used by the kernel in order to give direct access to the content of each
cell, regardless of its position/size in the underlying
device. Unfortunately, these information are not accessible by users,
unless by fully re-implementing the parser logic in userland.
Let's expose the cells and their content through sysfs to avoid these
situations. Of course the relevant NVMEM sysfs Kconfig option must be
enabled for this support to be available.
Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
group member will be filled at runtime only when relevant and will
remain empty otherwise. In this case, as the cells attribute group will
be empty, it will not lead to any additional folder/file creation.
Exposed cells are read-only. There is, in practice, everything in the
core to support a write path, but as I don't see any need for that, I
prefer to keep the interface simple (and probably safer). The interface
is documented as being in the "testing" state which means we can later
add a write attribute if though relevant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/nvmem/core.c | 135 +++++++++++++++++++++++++++++++++++++-
drivers/nvmem/internals.h | 1 +
2 files changed, 135 insertions(+), 1 deletion(-)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 1e1651be707b..9fc452e8ada8 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -299,6 +299,43 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
return nvmem_bin_attr_get_umode(nvmem);
}
+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
+ const char *id, int index);
+
+static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t pos, size_t count)
+{
+ struct nvmem_cell_entry *entry;
+ struct nvmem_cell *cell = NULL;
+ size_t cell_sz, read_len;
+ void *content;
+
+ entry = attr->private;
+ cell = nvmem_create_cell(entry, entry->name, 0);
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ if (!cell)
+ return -EINVAL;
+
+ content = nvmem_cell_read(cell, &cell_sz);
+ if (IS_ERR(content)) {
+ read_len = PTR_ERR(content);
+ goto destroy_cell;
+ }
+
+ read_len = min_t(unsigned int, cell_sz - pos, count);
+ memcpy(buf, content + pos, read_len);
+ kfree(content);
+
+destroy_cell:
+ kfree_const(cell->id);
+ kfree(cell);
+
+ return read_len;
+}
+
/* default read/write permissions */
static struct bin_attribute bin_attr_rw_nvmem = {
.attr = {
@@ -320,11 +357,21 @@ static const struct attribute_group nvmem_bin_group = {
.is_bin_visible = nvmem_bin_attr_is_visible,
};
+/* Cell attributes will be dynamically allocated */
+static struct attribute_group nvmem_cells_group = {
+ .name = "cells",
+};
+
static const struct attribute_group *nvmem_dev_groups[] = {
&nvmem_bin_group,
NULL,
};
+static const struct attribute_group *nvmem_cells_groups[] = {
+ &nvmem_cells_group,
+ NULL,
+};
+
static struct bin_attribute bin_attr_nvmem_eeprom_compat = {
.attr = {
.name = "eeprom",
@@ -380,6 +427,68 @@ static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
}
+static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
+{
+ struct bin_attribute **cells_attrs, *attrs;
+ struct nvmem_cell_entry *entry;
+ unsigned int ncells = 0, i = 0;
+ int ret = 0;
+
+ mutex_lock(&nvmem_mutex);
+
+ if (list_empty(&nvmem->cells) || nvmem->sysfs_cells_populated) {
+ nvmem_cells_group.bin_attrs = NULL;
+ goto unlock_mutex;
+ }
+
+ /* Allocate an array of attributes with a sentinel */
+ ncells = list_count_nodes(&nvmem->cells);
+ cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
+ sizeof(struct bin_attribute *), GFP_KERNEL);
+ if (!cells_attrs) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
+ if (!attrs) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ /* Initialize each attribute to take the name and size of the cell */
+ list_for_each_entry(entry, &nvmem->cells, node) {
+ sysfs_bin_attr_init(&attrs[i]);
+ attrs[i].attr.name = devm_kasprintf(&nvmem->dev, GFP_KERNEL,
+ "%s@%x", entry->name,
+ entry->offset);
+ attrs[i].attr.mode = 0444;
+ attrs[i].size = entry->bytes;
+ attrs[i].read = &nvmem_cell_attr_read;
+ attrs[i].private = entry;
+ if (!attrs[i].attr.name) {
+ ret = -ENOMEM;
+ goto unlock_mutex;
+ }
+
+ cells_attrs[i] = &attrs[i];
+ i++;
+ }
+
+ nvmem_cells_group.bin_attrs = cells_attrs;
+
+ ret = devm_device_add_groups(&nvmem->dev, nvmem_cells_groups);
+ if (ret)
+ goto unlock_mutex;
+
+ nvmem->sysfs_cells_populated = true;
+
+unlock_mutex:
+ mutex_unlock(&nvmem_mutex);
+
+ return ret;
+}
+
#else /* CONFIG_NVMEM_SYSFS */
static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
@@ -739,11 +848,25 @@ static int nvmem_add_cells_from_fixed_layout(struct nvmem_device *nvmem)
int nvmem_layout_register(struct nvmem_layout *layout)
{
+ int ret;
+
if (!layout->add_cells)
return -EINVAL;
/* Populate the cells */
- return layout->add_cells(&layout->nvmem->dev, layout->nvmem);
+ ret = layout->add_cells(&layout->nvmem->dev, layout->nvmem);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_NVMEM_SYSFS
+ ret = nvmem_populate_sysfs_cells(layout->nvmem);
+ if (ret) {
+ nvmem_device_remove_all_cells(layout->nvmem);
+ return ret;
+ }
+#endif
+
+ return 0;
}
EXPORT_SYMBOL_GPL(nvmem_layout_register);
@@ -902,10 +1025,20 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (rval)
goto err_remove_dev;
+#ifdef CONFIG_NVMEM_SYSFS
+ rval = nvmem_populate_sysfs_cells(nvmem);
+ if (rval)
+ goto err_destroy_layout;
+#endif
+
blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
return nvmem;
+#ifdef CONFIG_NVMEM_SYSFS
+err_destroy_layout:
+ nvmem_destroy_layout(nvmem);
+#endif
err_remove_dev:
device_del(&nvmem->dev);
err_remove_cells:
diff --git a/drivers/nvmem/internals.h b/drivers/nvmem/internals.h
index 4946456c76c7..18fed57270e5 100644
--- a/drivers/nvmem/internals.h
+++ b/drivers/nvmem/internals.h
@@ -32,6 +32,7 @@ struct nvmem_device {
struct gpio_desc *wp_gpio;
struct nvmem_layout *layout;
void *priv;
+ bool sysfs_cells_populated;
};
#if IS_ENABLED(CONFIG_OF)
--
2.34.1
next prev parent reply other threads:[~2023-11-29 16:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 16:37 [PATCH v14 0/8] NVMEM cells in sysfs Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 1/8] of: device: Export of_device_make_bus_id() Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 2/8] nvmem: Move of_nvmem_layout_get_container() in another header Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 3/8] nvmem: Create a header for internal sharing Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 4/8] nvmem: Simplify the ->add_cells() hook Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 5/8] nvmem: Move and rename ->fixup_cell_info() Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 6/8] nvmem: core: Rework layouts to become regular devices Miquel Raynal
2023-11-29 16:37 ` [PATCH v14 7/8] ABI: sysfs-nvmem-cells: Expose cells through sysfs Miquel Raynal
2023-11-29 16:37 ` Miquel Raynal [this message]
2023-12-05 14:46 ` [PATCH v14 0/8] NVMEM cells in sysfs Luca Ceresoli
2023-12-08 10:47 ` Srinivas Kandagatla
2023-12-08 12:05 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231129163737.698317-9-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=daniel@makrotopia.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=m.felsch@pengutronix.de \
--cc=michael@walle.cc \
--cc=rafal@milecki.pl \
--cc=rdunlap@infradead.org \
--cc=robert.marko@sartura.hr \
--cc=srinivas.kandagatla@linaro.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®