mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V3 1/3] qca_debug: Prevent crash on TX ring changes
Date: Wed,  6 Dec 2023 15:12:20 +0100	[thread overview]
Message-ID: <20231206141222.52029-2-wahrenst@gmx.net> (raw)
In-Reply-To: <20231206141222.52029-1-wahrenst@gmx.net>

The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.

So prevent this by stopping the network traffic handling and
temporary park the SPI thread.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/net/ethernet/qualcomm/qca_debug.c |  9 ++++-----
 drivers/net/ethernet/qualcomm/qca_spi.c   | 12 ++++++++++++
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index 6f2fa2a42770..a5445252b0c4 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -263,7 +263,6 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 		     struct kernel_ethtool_ringparam *kernel_ring,
 		     struct netlink_ext_ack *extack)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
 	struct qcaspi *qca = netdev_priv(dev);

 	if ((ring->rx_pending) ||
@@ -271,14 +270,14 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;

-	if (netif_running(dev))
-		ops->ndo_stop(dev);
+	if (qca->spi_thread)
+		kthread_park(qca->spi_thread);

 	qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
 	qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);

-	if (netif_running(dev))
-		ops->ndo_open(dev);
+	if (qca->spi_thread)
+		kthread_unpark(qca->spi_thread);

 	return 0;
 }
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index bec723028e96..b0fad69bb755 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -580,6 +580,18 @@ qcaspi_spi_thread(void *data)
 	netdev_info(qca->net_dev, "SPI thread created\n");
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park()) {
+			netif_tx_disable(qca->net_dev);
+			netif_carrier_off(qca->net_dev);
+			qcaspi_flush_tx_ring(qca);
+			kthread_parkme();
+			if (qca->sync == QCASPI_SYNC_READY) {
+				netif_carrier_on(qca->net_dev);
+				netif_wake_queue(qca->net_dev);
+			}
+			continue;
+		}
+
 		if ((qca->intr_req == qca->intr_svc) &&
 		    !qca->txr.skb[qca->txr.head])
 			schedule();
--
2.34.1


  reply	other threads:[~2023-12-06 14:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-06 14:12 [PATCH V3 0/3] qca_spi: collection of major fixes Stefan Wahren
2023-12-06 14:12 ` Stefan Wahren [this message]
2023-12-06 14:12 ` [PATCH V3 2/3] qca_debug: Fix ethtool -G iface tx behavior Stefan Wahren
2023-12-06 14:12 ` [PATCH V3 3/3] qca_spi: Fix reset behavior Stefan Wahren
2023-12-09  0:20 ` [PATCH V3 0/3] qca_spi: collection of major fixes patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231206141222.52029-2-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®