[PATCH] hwmon: (corsair-psu) Fix probe when built-in

[Armin Wolf <W_Armin@gmx.de>]

It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.

Compile-tested only.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
 drivers/hwmon/corsair-psu.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 904890598c11..2c7c92272fe3 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -899,7 +899,23 @@ static struct hid_driver corsairpsu_driver = {
 	.reset_resume	= corsairpsu_resume,
 #endif
 };
-module_hid_driver(corsairpsu_driver);
+
+static int __init corsair_init(void)
+{
+	return hid_register_driver(&corsairpsu_driver);
+}
+
+static void __exit corsair_exit(void)
+{
+	hid_unregister_driver(&corsairpsu_driver);
+}
+
+/*
+ * With module_init() the driver would load before the HID bus when
+ * built-in, so use late_initcall() instead.
+ */
+late_initcall(corsair_init);
+module_exit(corsair_exit);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Wilken Gottwalt <wilken.gottwalt@posteo.net>");
--
2.39.2